Hello again,
Update to my last post: I turned everything off, went and had a cup of
coffee, came back and tried the RF gain calibration routine again with K3
Utility - worked just fine this time. So, not sure why those errors. I had
turned everything off and re-booted the K3, restarted the
John - I would say that if it is just flickering on and off that is
exactly right. It does at least show that the receiver is live and the
residual noise is registering on the S-meter. Perhaps if you shorted
ANT1 to ground the flickering might reduce.
Personally, if my S-meter did not
Hello John!
In ABS mode this is normal. It is a consequence of offsets the DSP is
doing to account for the settings of ATT and PRE, along with the method
used to pass S Meter information to the MCU.
73,
Lyle KK7P
After the RF calibration, I re-did the S-meter calibration using the XG3,
Thanks Lyle and David. Sounds all's configured OK then. I'll get back to
playing with my K3.
73,
John
VK7JB
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-s-meter-calibration-parameters-and-flickering-S1-tp6418969p6420986.html
Sent from the Elecraft mailing list
4 matches
Mail list logo