Thanks Steve
Tony
Sent from my iPad
> On Feb 22, 2022, at 8:19 PM, Steve Hall <99sun...@gmail.com> wrote:
>
> Tony,
> For full output, my KPA1500 requires 27 to 30 Watts depending on the band.
> I have not observed any overshoot on either my K3s or K4D.
> Steve, WM6P
>
elieve the SWR has had any involvement with
this problem. All my antennas SWR are below <1.5.
73,N2TK, Tony
-Original Message-
From: Jim Brown
To: elecraft@mailman.qth.net
Sent: Fri, Feb 11, 2022 5:34 pm
Subject: Re: [Elecraft] K3 strange overshoot
On 2/11/2022 2:06 PM, Bob McGraw wrot
Tony,
For full output, my KPA1500 requires 27 to 30 Watts depending on the band.
I have not observed any overshoot on either my K3s or K4D.
Steve, WM6P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
2TK, Tony
-Original Message-
From: Jim Brown
To: elecraft@mailman.qth.net
Sent: Fri, Feb 11, 2022 5:34 pm
Subject: Re: [Elecraft] K3 strange overshoot
On 2/11/2022 2:06 PM, Bob McGraw wrote:
> I see a small initial overshoot when changing bands. Drive power for
> each band is different.
Sam
On 2/11/2022 2:06 PM, Bob McGraw wrote:
I see a small initial overshoot when changing bands. Drive power for
each band is different.
Same here. I think it's the K3, and I think it's normal.
73, Jim K9YC
__
Elecraft mailing list
Home:
. Then place the amp in OPER as the band
change puts it in STBY. This seems to negate the issue.
73
Bob, K4TAX
On 2/11/2022 3:06 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 8
Date: Fri, 11 Feb 2022 16:43:21 +0100
From: "Petr Ourednik"
To:Elecraft@mailman.qth.net
Subject: [El
Ahoj Petr,
I have a similar problem with my K3s. Drive power for the amp is 20 to 25w and
the power spike is always around 70w. Elecraft had the radio for three months
and claimed they could not reproduce the fault. I discovered later that it only
occured when I was in CW QRQ mode and that I
Hi folks,
so sorry to bother you over here.
I realized strange behavior of my trusty K3 (#778 fully upgraded, loaded,
latest synths installed)
When I tried to exciting KPA500 amp I suffered with strange overshoots during
first dots.
Symptoms:
- up to 12W from K3 all is ok, over 13W the full
8 matches
Mail list logo
