Thanks for catching this, Paul.
Wayne
N6KR
On May 12, 2015, at 6:03 AM, Paul Kirley pkir...@fuse.net wrote:
Today I happened to look down the K3 Parts and Mod Kits web page and
noticed that the description of the K3STFNR reads as follows:
K3STFNR New K3 Synthesizer Stiffener Plate Kit
I am awaiting the K3EXREF mod to become available. While I have my K3 apart
should I upgrade and add the K3STFNR plates to the two synthesizer boards in my
K3. I've checked the archives with mixed results as to the efficacy of this
mod. Any opinions out there? Thank you.
R Thorpe K6CG
That's a good question. I haven't noticed the problem the stiffener solves,
but I don't use the internal speaker. But one day I might.
Richard Thorpe-2 wrote:
I am awaiting the K3EXREF mod to become available. While I have my K3
apart should I upgrade and add the K3STFNR plates to the two
Richard Thorpe-2 wrote:
I am awaiting the K3EXREF mod to become available. While I have my K3
apart should I upgrade and add the K3STFNR plates to the two synthesizer
boards in my K3. I've checked the archives with mixed results as to the
efficacy of this mod. Any opinions out there?
Hi Bill
You would only need to mod the main board as the second is never used on
transmit so does not have a problem.
I would go ahead and add it so if you should ever want to use the
internal speaker you could without problems.
Ray K8RDJ
On Wed, Apr 27, 2011 at 6:37 PM, Bill W4ZV
On Wed, Apr 27, 2011 at 7:33 PM, Raymond Anderson rayk8...@gmail.comwrote:
You would only need to mod the main board as the second is never used on
transmit so does not have a problem.
True but Elecraft recommends doing both boards if you have the KRX3:
If your K3 is equipped with the
I found that it cleaned up some birdies, as the heavy aluminum
stiffener plate does shield the board. It takes the same time to do
two boards as to do one. You can get RX microphonics as well, and
that can happen with both boards if you have the KRX3.
I did both of mine and I'm happy I did.
7 matches
Mail list logo
