From the programmers Manual: " BR (Serial I/O Baud Rate; SET only) SET format: BRn; where n is 0 (4800 b), 1 (9600 b), 2 (19200 b), or 3 (38400 b). Note: The K3 firmware download utility automatically sets the K3 to 38400 baud for downloads, then restores the baud rate to the user’s selection (made using the K3’s CONFIG:RS232 menu entry). "
The question: Is there a way to change the K3s from RS-232 to USB programmatically? I want to do this for remote-control reasons. OF course, I know I'll lose connectivity via RS-232 once switched! I want the ability to switch from RRC1258 + K3/0 to a software-only remote. I know I can do this by using the COM1 port on the station RRC, but would like to do it programmatically as well. Has BR been extended in the K3s or is there no way to do this? (It would also be a great way to recover from a remote op accidentally switching RS-232 to USB on a K3/0 mini!) TIA CU all in Dayton, 73, Gerry Hull, *W1VE *Hancock, NH USA CWOps #191 | YCCC | CanAm Contest Coalition | Maritime Contest Club RadioSport Manitoba | ARRL | RAC | QCWA ARCluster dxc.w1ve.com | Telnet or telnet:7373 access | RBN direct feeds ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com