In case anyone in the future has the same question, here is a follow-up for the
archive:
According to Gary at Elecraft error code 202 in the KAT2 submenu is a normal
result code. So all is well.
73,
Paul - N8XMS
__
Elecraft mailing
My recently installed KAT2 indicates an error code of 202. The manual says
that
error codes for the ATU range from 0 to 199. Does an error code of 202
indicate
anything?
Thanks in advance for any replies.
73,
Paul - N8XMS
__
Paul,
To the best of my knowledge, E202 would be something that the KAT100
might display, but not the KAT2. Perhaps someone got the firmware
stickers wrong.
I think you should send a note to supp...@elecraft.com.
73,
Don W3FPR
Paul Huff wrote:
My recently installed KAT2 indicates an error
Please note that I also receive this error code on my KAT2 (202).
I have successfully gone through all of the testing steps to ensure that
each inductive and capacitive component is available and can be switched
into and out of the circuit. It is my impression, however, that the tuner
unit
4 matches
Mail list logo