I have worked on thousands of these and I *never* pull the side panel to
take out the KAT3 (or KANT3) boards.
Too difficult if there is a sub-receiver and too likely to introduce a
problem (broken regulator(s), miss-pinned sub receiver) from removing
all that.
Take off top cover and take out
Because the KAT3A was marketed both as a replacement for the KAT3 and as
a component of new K3s rigs, its installation instructions show how to
remove the previous antenna tuner card, if necessary.
Please consult the first 10 pages of
efl"
Sent: 24/09/2020 22:35:08
Subject: Re: [Elecraft] KAT3A
Have you looked at the manual? You can follow the installation instructions in
reverse …. might give you a hint.
On Sep 24, 2020, at 5:26 PM, Tom Fitzpatrick via Elecraft
wrote:
Can anyone tell me the secret to pu
Have you looked at the manual? You can follow the installation instructions in
reverse …. might give you a hint.
> On Sep 24, 2020, at 5:26 PM, Tom Fitzpatrick via Elecraft
> wrote:
>
> Can anyone tell me the secret to pulling the KAT3A tuner card out of a
> K3? I changed it out once
Can anyone tell me the secret to pulling the KAT3A tuner card out of a
K3? I changed it out once for the newest version but forgot how I did it. Part
of th chassis frame stops the board from being pulled out.
Tom, K4IE
__
For station use at home I could get by without. But my radios are used for many
club/portable events and antennas are often not optimal. So a ATU is helpful.
And I figure if I ever want to sell it it might bring either higher price or
quicker sale.
Sent from my iPhone
...nr4c. bill
> On
It was a $400 option and unnecessary with resonant antennas. I have three
Elecraft K3S's and none of them have KAT3A tuners.
John KK9A
Nr4c wrote
No K3(S) should exist without the appropriate KAT3(a).
Sent from my iPhone
...nr4c. bill
Really? Mine doesn't and it doesn't have a 2nd RX either, something that
everyone "knows" you have to have to work DX.
Wes N7WS
DXCC Honor Roll and 9-band DXCC (All from the same city)
On 4/11/2020 6:12 PM, Nr4c wrote:
Yes. No K3(S) should exist without the appropriate KAT3(a).
Specifically, multiple samples of ft-991 owned by different operators would
"autotune" optimally poorly ( resulting in a 99:1 on a 6-10:1 feed?)
against multiple samples of, iirc, 4BTV. I suspect software bugs may play a
part as well. *Shrug*
I haven't operated my 991 since, instead use my kx3 as
On 4/11/2020 8:14 PM, Tox wrote:
Ft-991 (pre-A samples at least) has trouble tuning some multitrap verticals
for all the expected bands, this may explain why
The things we call "antenna tuners" do nothing at all to the antenna.
Rather, they are an adjustable network that we adjust so that the
Ft-991 (pre-A samples at least) has trouble tuning some multitrap verticals
for all the expected bands, this may explain why
On Sat, Apr 11, 2020, 7:57 PM Mark Goldberg wrote:
> On Sat, Apr 11, 2020 at 6:09 PM Bob McGraw K4TAX
> wrote:
>
> > My 6M yagi shows a 5.3:1 SWR as indicated on my K3S
On Sat, Apr 11, 2020 at 6:09 PM Bob McGraw K4TAX
wrote:
> My 6M yagi shows a 5.3:1 SWR as indicated on my K3S on 28.3MHz with the
> ATU in Bypass mode. When the KAT3A ATU in the radio resolves a match,
> the indicated SWR indicated is 1.1:1 on the radio.
>
> Using the same antenna but using
If you're trying to figure out if you should purchase a KAT3A, you cannot buy
one from Elecraft.
John KK9A
John Stengrevics WA1EAZ wrote:
I would if I had one!
73,
John
WA1EAZ
> On Apr 11, 2020, at 5:15 PM, Don Wilhelm wrote:
>
> Why don't you tap the ATU TUNE button and see what
So you’re questioning whether you should buy one?
Might have made that clear in your query.
Yes. No K3(S) should exist without the appropriate KAT3(a).
Sent from my iPhone
...nr4c. bill
> On Apr 11, 2020, at 5:32 PM, John Stengrevics
> wrote:
>
> I would if I had one!
>
> 73,
>
>
My 6M yagi shows a 5.3:1 SWR as indicated on my K3S on 28.3MHz with the
ATU in Bypass mode. When the KAT3A ATU in the radio resolves a match,
the indicated SWR indicated is 1.1:1 on the radio.
Using the same antenna but using my KAT500 ATU the best SWR resolved is
1.6:1 as indicated on the
What’d I tell you?
Sent from my iPhone
...nr4c. bill
> On Apr 11, 2020, at 5:17 PM, Don Wilhelm wrote:
>
> Why don't you tap the ATU TUNE button and see what happens?
>
> 73,
> Don W3FPR
>
>> On 4/11/2020 5:06 PM, John Stengrevics wrote:
>> My 6 meter antenna reads an SWR of 10:1 on 10
Why not try it.
The KAT3(a) can tune many a strange antenna.
It seems so easy to hook up the antenna and tap the button to see if it works
instead of typing a query here and getting many responses. A lot of which will
suggest “Try it and see. “
Good luck.
Sent from my iPhone
...nr4c.
I would if I had one!
73,
John
WA1EAZ
> On Apr 11, 2020, at 5:15 PM, Don Wilhelm wrote:
>
> Why don't you tap the ATU TUNE button and see what happens?
>
> 73,
> Don W3FPR
>
> On 4/11/2020 5:06 PM, John Stengrevics wrote:
>> My 6 meter antenna reads an SWR of 10:1 on 10 meters. The
Why don't you tap the ATU TUNE button and see what happens?
73,
Don W3FPR
On 4/11/2020 5:06 PM, John Stengrevics wrote:
My 6 meter antenna reads an SWR of 10:1 on 10 meters. The KAT3A specs suggest
it can tune that degree of mismatch. Is it reasonable to think that the KAT3A
could match my
My 6 meter antenna reads an SWR of 10:1 on 10 meters. The KAT3A specs suggest
it can tune that degree of mismatch. Is it reasonable to think that the KAT3A
could match my antenna well enough for 10 meters?
Thanks & 73,
John
WA1EAZ
If I had a problem with a KAT3, the first thing I would check would be
the relays.
But where is the LP100 connected? It must be AFTER the KAT3, so a
problem in the KAT3 would not change the SWR indicated on the LP100 (or
the P3 for that matter).
Maybe you had a cable, connector, or antenna
I have been having unusual transmit issues
with 160M, SWR issues I have long thought
was antenna related.
Last night I found when transmitting on
160 the SWR on the LP-100 suddenly showed
9.1 and the same with the remote sensor
for the P3 but no output shown on the P3
wattmeter. I
Joseph,
Get yourself a *new* #1 phillips screwdriver (if your screwdriver tip
looks shiny, it is worn, throw it away). If you are trying to use a #2
(the most common phillips), then get a #1. You may be wise to replace
the stripped screws. Consider the Stainless Steel screw kit from
KAT3A and KIO3B installed! Had a scare as I couldn't remove the bottom
center screw on the right side panel, it started stripping. I had this
issue on one of the front panel screws about a year ago when I was trying
to replace my VFO B encoder. I was able to get the KAT3A installed without
I bet the KEY macro in N1MM+ would work. Purely speculation on my part since I
haven't tried it but it works fine for CW.
73,
Brian, K0DTJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
There is no access to FSK-D using CAT commands other than those
supplying ASCII strings.
FSK-D can transmit using paddle (not straight key) input, ASCII text,
the FSK pin on the ACC connector (with a one transistor keying
interface) or from the Terminal screen of K3 Utility.
I do not know
I've attempted to configure MMTTY to run FSK with my K3S. Conclusion is that a
Terminal unit will be required. Using AFSK is easy and I don't find any
disadvantages. No additional hardware required.
Bob, K4TAX
Sent from my iPhone
> On Jan 10, 2019, at 4:57 PM, Nr4c wrote:
>
> None
None that I know of. FSK is not normally a CAT control nor is it done with
“handshake” signals on standard serial port. It is passed on the TX line of a
RS-232 serial connection to a discrete pin on a radio for FSK signaling. My K3
has such a pin on the Acc2 connector on the rear of the radio.
I don't think there is a lot of software that supports sending the FSK with
CAT commands. Does anyone know of any others?
J
On Wed, Jan 9, 2019 at 4:42 PM Bill Frantz wrote:
> On 1/9/19 at 8:05 AM, joseph.dur...@gmail.com (Joseph M. Durnal) wrote:
>
> >I think my only regret will be that I'll
A very good idea Gordon. I do that with cocoaModem, which allows
me to decode the second receiver as well, allowing Single
Operator Two Receiver contesting. fldigi is also a possibility.
I'm currently in the process of trying to find a place for a
third monitor in my shack so I can have enough
Using the CAT interface this way is great. BUT you loose some decoding
ability. I run a K3 in RTTY contests, TX is FSK RX is 3 decoders, the
K3 built in, mmtty and 2tone. usually 2tone beats the other 2, with
mmtty sometimes winning. The K3 decoder misses the most. You might
want to try
On 1/9/19 at 8:05 AM, joseph.dur...@gmail.com (Joseph M. Durnal) wrote:
I think my only regret will be that I'll still need my separate FSK
interface, yeah yeah, AFSK, but if Elecraft didn't want us to use FSK, they
wouldn't have put it in the radio.
When I RTTY contest, I use a program that
I had written up a nice couple of e-mails for the reflector asking about
upgrading my K3 with a KAT3A & KIO3B. But I went ahead and clicked check
out.
I'm really looking forward to cutting down a bit on the boxes and wires on
my desk. I couldn't think of a more expensive way of doing that!
I
Kim,
The KAT3A fits in any K3S, with or without the KPA3.
If you have need for a tuner, you will like it.
73,
Don W3FPR
On 12/20/2016 1:59 AM, Jim Larson wrote:
I have a K3S/10 with a few extra filters and the DVR board installed. I’d like
to purchase the KAT3A automatic antenna tuner, but
I have a K3S/10 with a few extra filters and the DVR board installed. I’d like
to purchase the KAT3A automatic antenna tuner, but want to make sure that it
can be installed in this 10w version of the K3S, or does it require the 100w
option?
Do you feel it is a nice addition to the rig?
Are
But my question s what is different in KAT3 and KBPF3A that I need to
change them
KAT3A has a bypass relay when the tuner is not in use.
KBPF3A changes the bandpass filter for 0.5 - 2.0 MHz "band" to move
the lower cutoff from 500 KHz to 100 KHz.
73,
... Joe, W4TV
On 9/29/2015 11:11
Hello
Is the K3S ATU different tan the old K3ATU installed in the K3?
I was told that if I want to upgrade a K3 with general coverage to a similar
K3S I need to change:
KAT3A
KBPF3A
KSYN3AUPG
KXV3B
But my question s what is different in KAT3 and KBPF3A that I need to change
them
I am the proud owner of K3/10 #8972, recently upgraded with the KPA3.
Two questions:
Has the KPA3 been upgraded to new PA finals? It would appear so with a
Mitsubishi device rather than the Toshiba.
Is the KAT3A compatible with the K3 as that is my next upgrade?
73 Jerry N0XWR
38 matches
Mail list logo