Lyn,
There is obviously a problem with your KPA500 ALC.
I doubt those of us here has the capability to diagnose the problem
properly.
Contact K3support and perhaps they can guide you through some checks
which will identify the problem area and allow you to either correct it
or determine if
Hello all,
My backup KPA500 has an issue with the ALC connection. As soon as I apply power
to the amp, the ALC voltage on the connector goes to -5.2vdc. It is a “hard”
problem, not effected by any tapping or poking around that I have done so far.
It takes about 3 seconds for the voltage to
2 matches
Mail list logo
