On 8/10/2020 9:00 AM, Jim H via Elecraft wrote:
Hi,I'd like to add the PAE power supply. Small, noise free.73
This PSU IS quiet when supplying the 150mA or so needed on receive, but
pretty noisy with the much larger currents needed for transmit. That
means it's fine if it only powers a KX3
Nice install.
I took the GEM mounts and plywood one more step. I used a ~12" round
3/4" plywood disk and mounted three RAM mounts;
https://www.rammount.com/ . KX3, PX3 and Plastic "box". The box can
hold audio ADC and CAT control or for picnic table OP's, and antenna. I
am able to adjust
Hi,I'd like to add the PAE power supply. Small, noise free.73 Jim H k7sss In
a message dated 8/10/2020 6:57:14 AM Pacific Standard Time, gio.fl...@gmail.com
writes:
GiRls,
You might also consider a power-splutter cable from ProAudio Engineering.
73,
John K4ARQ
On Sun, Aug 9, 2020, 16:19
Check out M0TDZ's 3D printing KX3/PX3 stand customized with your call.
http://chopcat.co.uk/blog-2/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
GiRls,
You might also consider a power-splutter cable from ProAudio Engineering.
73,
John K4ARQ
On Sun, Aug 9, 2020, 16:19 Ron Bell via Elecraft
wrote:
> Any recommendation for a desktop stand for a KX3 and PX3 that would keep
> both at proper angle and manage the wires?
>
>
Checkout www.nogaqrp.org.
Clark, WU4B
On Sun, Aug 9, 2020 at 7:58 PM Mark Goldberg
wrote:
> Gem's Products KX3 and PX3 mounts and some plywood works for me. See
> the bottom of this page:
>
> https://sites.google.com/site/marksmobilehamstation/
>
> 73,
>
> Mark
> W7MLG
>
> On Sun, Aug 9, 2020
I second the NoGaQrp stand.
On Sun, Aug 9, 2020 at 20:13 Jim H via Elecraft
wrote:
> Hi,Try No Georgia Qrp club. www.nogaqrp.org. Nice stand to stack a KX3
> and a PX3.73JIm H k7sss In a message dated 8/9/2020 1:20:13 PM Pacific
> Standard Time, elecraft@mailman.qth.net writes:
> Any
Here is one I built using generally available parts.
It’s buried but obvious in this blog post of mine.
https://nomadic.blog/2020/05/08/of-cannons-beer-and-paradise/
Paul
> On Aug 9, 2020, at 4:59 PM, Mark Goldberg wrote:
>
> Gem's Products KX3 and PX3 mounts and some plywood works for me.
Hi,Try No Georgia Qrp club. www.nogaqrp.org. Nice stand to stack a KX3 and a
PX3.73JIm H k7sss In a message dated 8/9/2020 1:20:13 PM Pacific Standard
Time, elecraft@mailman.qth.net writes:
Any recommendation for a desktop stand for a KX3 and PX3 that would keepboth at
proper angle and
Gem's Products KX3 and PX3 mounts and some plywood works for me. See
the bottom of this page:
https://sites.google.com/site/marksmobilehamstation/
73,
Mark
W7MLG
On Sun, Aug 9, 2020 at 1:18 PM Ron Bell via Elecraft
wrote:
>
> Any recommendation for a desktop stand for a KX3 and PX3 that would
Any recommendation for a desktop stand for a KX3 and PX3 that would keep
both at proper angle and manage the wires?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
11 matches
Mail list logo