David,
I’m glad you got it resolved.
Myron WV0H
Printed on Recycled Data
From: David Davis
Sent: Wednesday, June 8, 2016 8:58 PM
To: thelastdb; elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 RF out voltage measurements...
Myron,
Thank you very much for the information. It helped me check
n WVØH
> Printed on Recycled Data
> Original message
> From: David Davis <kg6...@sbcglobal.net>
> Date: 6/7/2016 10:49 PM (GMT-07:00)
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] KX3 RF out voltage measurements...
>
> I might have an RF out
David,
If you have a dummy load and any sort of Wattmeter
which can measure in 10-20 W range, that should
tell you if you're getting NO power out.
And make sure you have the power out dialed in at
10 watts or so in the KX3, not set to zero.
73, Phil W7OX
On 6/8/16 8:42 AM, David Davis
ization and further reading about its use.
>
> 72
> Myron WVØH
> Printed on Recycled Data
> Original message
> From: David Davis <kg6...@sbcglobal.net>
> Date: 6/7/2016 10:49 PM (GMT-07:00)
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] KX
Phil.
My testing started when I started to realize that I might not have any RF
output.
I started to believe this to be the situation when no matter what band or mode
I tried I was no longer able to make a contact of any type while working
portable.
When I returned home and connected my
WVØHPrinted on Recycled Data Original message From:
David Davis <kg6...@sbcglobal.net> Date: 6/7/2016 10:49 PM (GMT-07:00) To:
elecraft@mailman.qth.net Subject: [Elecraft] KX3 RF out voltage measurements...
I might have an RF out issue with my KX3 but I am not sure how to test
David,
You'll likely get more help if you describe what
is causing you to think you might have an RF out
issue with your KX3.
73, Phil W7OX
On 6/7/16 9:49 PM, David Davis wrote:
I might have an RF out issue with my KX3 but I am not sure how to test it.
I have an Elecraft DL1 and a DMM
It is best to use CW or Tune or even AM to check power output.
If you don't speak into the mic in SSB mode, the output should
be zero, as the carrier is suppressed and with no audio, there
is no side band.
73 Bill AE6JV
On 6/7/16 at 9:49 PM, kg6...@sbcglobal.net (David Davis) wrote:
I
I might have an RF out issue with my KX3 but I am not sure how to test it.
I have an Elecraft DL1 and a DMM that I figure I can use to check the RF
voltages and verify the power out. However, I am not sure of the exact
process on how to do this. If I am keying the mic on SSB do I need to
speak
9 matches
Mail list logo
