[Elecraft] KX3 + KX 2M vs IC-705 on 144mhz

Hello, I wonder if anyone has compared KX3 with KX 2M against IC-705 or IC-9700 on 2m? Receiver characteristic and TX TX noise? Thanks in advance... Samir, sm7vzx __ Elecraft mailing list Home:

Re: [Elecraft] KX3 with 2m module for satellites

Yes, i've used the KX3 for both the FM and linear birds. It works quite well, except for the power level. 3 watts on 2mtrs is a little low for the birds. Yes, it can be done, and it can be done with an Arrow, IF you pick the right time. On the west coast, pick a pass late at night and a west of

[Elecraft] KX3 with 2m module for satellites

Good evening everyone! Just wondering if anyone has experience working linear (or FM for that matter) satellites with a KX3 and the 2M transverter installed? I see it's limited to 2.5-3W of output, and after reading the manuals, I believe it'll work SSB for the linear satellites. My

Re: [Elecraft] Kx3 and 2M

What mode SSB or FM? 73 from David GM4JJJ > On 8 May 2016, at 19:23, Patrick Luke wrote: > > I have a KX3 with the 2M and atu options installed and a mirage dual band > 2M/440amp connected. > > The issue is that the 2M signal/voice seem clipped if they are strong'ish > > it

[Elecraft] Kx3 and 2M

I have a KX3 with the 2M and atu options installed and a mirage dual band 2M/440amp connected. The issue is that the 2M signal/voice seem clipped if they are strong'ish it was working beautiful then not so much.. same issue with out the linear attached. The external antenna seems to be working

Re: [Elecraft] [KX3] KX3-2M Module FAQ now available

Is the PTT going to be the XMIT button? Mike. AC6JA Sent from my iPad On Nov 4, 2013, at 9:15 AM, Wayne Burdick n...@elecraft.com wrote: See www.elecraft.com/manual/KX3-2M%20FAQ.htm for answers to frequently asked questions about the forthcoming KX3 2-meter module. This is an early

Re: [Elecraft] [KX3] KX3-2M Module FAQ now available

ac...@aol.com wrote: Is the PTT going to be the XMIT button? Hi Mike, Most operators use the mic's PTT button, but you can also tap XMIT to start/end transmit. There's one catch, having to do with DTMF. For numeric keypad purposes, XMIT is used as the '0' switch. So if you tap XMIT, then

Re: [Elecraft] [KX3] KX3-2M Module FAQ now available

I bought that L-shaped computer mic from Fry's a while back and was thinking of using/holding the KX3 like an HT, so wasn't sure how I would key it when using it that way. Thanks for the info. Mike AC6JA In a message dated 11/4/2013 2:01:23 P.M. Pacific Standard Time,