The other day I called Elecraft on another matter, and while I had them on
the phone I asked to speak to a K3 technician about the new synthesizer
installation. I was transferred to Howard who asked me to tap DISP and
scroll through the menu items. When I did I found two new displays: SYN 1
OK
..
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of mackmc
Sent: Friday, March 20, 2015 7:56 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] New K3 Synthesizer now requires multiple boots
I installed the new synthesizer and for the past couple
I installed the new synthesizer and for the past couple of days my K3
requires me to cycle the power button about a dozen times to get signals.
The K3 boots normally and there isn't an error displayed but there are no
signals present on the radio. I'm running the latest firmware: MCU 5.14 /
DSP
Mack:
I have not seen this problem.. Yes, I would contact tech support..
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of mackmc
Sent: Friday, March 20, 2015 7:56 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] New K3 Synthesizer now
I have installed two new KSYN3AUPG boards in my K3. They are working
perfectly.
This Synthesizer is an excellent re-design and is a welcome upgrade to the
K3.
No Tuning or Calibration is now needed for the new Synthesizers.
The Noise Floor is lower and the Receiver sounds quieter and cleaner.
Wayne - thanks - news of the new K3 Synthesizer is very exciting! And I
will be very interested in the Sherwood testing of the K3 with the new
board.
Question: how hard is it to install it in the K3? And how hard to
install in the sub receiver?
You say a K3 with Sub-receiver needs both to
6 matches
Mail list logo
