- WE5ST
From: Ian White GM3SEK gm3...@ifwtech.co.uk
To: elecraft@mailman.qth.net
Sent: Friday, October 26, 2012 5:06 PM
Subject: Re: [Elecraft] P3 Anomoly
N4OI - Ken wrote:
Appears to be bad BNC-BNC cable that was supplied with P3. Easy to
replace.
Yes, I just
Jim AB3CV wrote
Appears to be bad BNC-BNC cable that was supplied with P3. Easy to
replace.
Yes, I just assembled my P3 a few weeks ago and noticed that the BNC cable
ends had a very loose fit on both the P3 and K3 BNC connectors. Although I
did not experience a problem, I replaced it with a
I didn't use mine either...seemed too cheaply made.
Sent from my iPad
Chuck, KE9UW
(Jack for BMW motorcycles)
On Oct 26, 2012, at 5:46 AM, N4OI - Ken ke...@roadrunner.com wrote:
Jim AB3CV wrote
Appears to be bad BNC-BNC cable that was supplied with P3. Easy to
replace.
Yes, I just
N4OI - Ken wrote:
Appears to be bad BNC-BNC cable that was supplied with P3. Easy to
replace.
Yes, I just assembled my P3 a few weeks ago and noticed that the BNC
cable ends had a very loose fit on both the P3 and K3 BNC connectors.
Although I did not experience a problem, I replaced it with
Appears to be bad BNC-BNC cable that was supplied with P3. Easy to replace.
jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I'm finding my P3 is doing something new and unpleasant. It keeps dropping
it's senstivity after a few minutes. The noise level is visible normally
above a -140db threshold on most bands but right now I need to move the REF
LVL to -160 to show noise on 20m. If I turn it off and on again the noise
OK I think I am sending this to the list now.
My K3 VFO reads 7.000.000 P3 freq is 7.000.00 If I click on RIT and change
K3 VFO reading (via RIT) to 7.000.100 the P3 freq reading is now 7.000.20
I think this is the same results that David is reporting.
Joe K2UF
No trees were harmed in the
:22 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] P3 anomoly
OK I think I am sending this to the list now.
My K3 VFO reads 7.000.000 P3 freq is 7.000.00 If I click on RIT and change
K3 VFO reading (via RIT) to 7.000.100 the P3 freq reading is now 7.000.20
I think this is the same
Yes, Joe,
Using your example I see the same thing.
At first I thought it might have to do with the granularity of the P3 Freq
steps but that isn't it.
Something I never noticed, nor do I think I will notice during regular
operating, but it is strange.
Rick
K6LE
On 10/31/2011, at 2:22 ,
9 matches
Mail list logo