I might suggest that folks do not neglect that the RF may be getting into
the keyboard, causing its microcontroller to crash. Remember that we live
in an "Everything is a computer" world.
- Brendon
KK6AYI
On Sun, Nov 26, 2017 at 10:22 AM, Jim Brown
wrote:
> Good
Good advice, Kevin, especially winding as many turns as practical. I
wouldn't add the extension unless a choke without it didn't solve the
problem.
73, Jim K9YC
On 11/26/2017 8:52 AM, Kevin Stover, AC0H wrote:
The mix of the toroid's used does matter. Mix 31 is best.
Here is what I did
ideals
Gerald
From: Kevin Stover, AC0H
Sent: Sunday, November 26, 2017 10:54 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] RF feedback problems with P3 and external keyboard
The mix of the toroid's used does matter. Mix 31 is best.
Here is what I did with a USB mouse.
I bought four mix
The mix of the toroid's used does matter. Mix 31 is best.
Here is what I did with a USB mouse.
I bought four mix 31 snapon's and installed two 18 inches back from the
mouse and another pair 18 inches back from the connector, winding as
many turns as would fit. I bought a USB extension cable
with your P3 issue.
73,
Alan. G4GNX
-Original Message-
From: ANDY NEHAN
Sent: Friday, November 24, 2017 8:34 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] RF feedback problems with P3 and external keyboard
After LOTS of experimentation I think I have found that just recently I have
After LOTS of experimentation I think I have found that just recently I have
some RF feedback into the usb keyboard on the rear of the P3. This manifests
itself particularly badly with the Genovation keyboard but is also present with
a standard usb keyboard. Oddly enough it is MUCH worse when
6 matches
Mail list logo