The good folks at Elecraft provided me with a solution to my earlier posted problem.
Using the original macro for split: SWT13;SWT13;FT1;UPB4;RT0;XT0;SB1;BW$0080 Works fine if you only intend to use it on cw. But if you go to ssb, it has two problems: a) it doesn't switch modes and b) it sets the vfo B bandwith to 800 hz which isn't so good for ssb Here's the fix . a) change the macro to add the word delay (no quotes) in between the two SWT13 statements b) remove the BW$0080 statement the new macro looks like this: SWT13;delay;SWT13;FT1;UPB4;RT0;XT0;SB1 The mode now switches properly. You will have to manually set the bandwidth you want for vfo b in ssb and cw, but the good thing is the K3 remembers it. Pete, W1RM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html