If you're into 6 meter SSB, you may want to take advantage of the semi-channelezation that occurs in this band segment. While operators generally start at 50.125, they quickly spread up the band in 5 kHz increments when there's a lot of activity, like today.
The K3 and K3S can hop among a group of channels (frequency memories) on 6 meters, either manually (by rotating the VFO) or automatically (by starting a scan). The setup procedure is described in the owner's manual. On my K3S I set up 5 frequency memories: 50.125, .130, .135, .140, and .145. In order to use these with channel hopping, they have to be in a group of contiguous memories (I used 50-54), and each one in the group has to have a label with an asterisk (*) in the first character position. You can set these up at the radio itself or using the K3 Frequency Memory Editor. Once the memories are set up, you can start channel-hop scanning as follows: 1. Do M->V (memory recall), selecting memory #50 with VFO, then tap M->V again. VFO A will can now be used to do manual hopping among the channels. 2. Hold SCAN to start scanning among the 5 channels. The receiver will stay muted during the scan until signals are present. 3. Optionally hold SCAN for > 3 seconds, starting a "Live" scan. In this case the receiver remains unmuted and scanning will continue until you tap any switch or rotate the VFO. 73, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
