Several days ago I posted the below to the Reflector. After a couple of
days of reproducing the below errors,
I can safely say that NONE of them are connected to the Synthesizer
Upgrade. Since they all happened
since the upgrade I made the incorrect assumption that that had
something to do
OK, Dennis, I'll try to reproduce this.
Wayne
N6KR
On Oct 1, 2015, at 11:14 AM, Dennis wrote:
> Wayne
>
> I've tried to reproduce #2 with no luck. It happened several times during
> the contest, but I couldn't draw
> any conclusions with what I was doing and the
Wayne
I've tried to reproduce #2 with no luck. It happened several times
during the contest, but I couldn't draw
any conclusions with what I was doing and the pops. I've played with
the K3 for several hours after the
contest but have not had the pops reoccur.
#4 is easily reproduced. In
Hi Dennis,
> #2- I have heard a number of loud audio "pops" since the above changes.
Please email me directly with a description of how these pops can be produced,
i.e. what controls you're using at the time.
> #4- During CQWW RTTY, if I was transmitting and pushed a key- say A/B, or
> Rev-
About #2, make sure you did not accidentally have the AGC off. If you like
to operate without AGC, you can set the AGC to not cut in until a signal is
quite loud, and then holds anything higher to the same level. It's kind of
like AGC OFF with a safety valve.
73, Guy K2AV
On Thu, Oct 1, 2015 at
I got a few of the ERR KEY messages as well, I am unable to reproduce
them as well...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
> #4 is easily reproduced. In SSB mode, activate the PTT. Push the REV key,
> and one of two things happens:
> if you keep the radio keyed, ERR PTT shows on VFO B until you unkey it, then
> its followed by ERR KEY.
> Happens with any key that doesn't function when you're transmitting. When it
7 matches
Mail list logo