ysg>
From: elecraft-boun...@mailman.qth.net on
behalf of Fred Jensen
Sent: Saturday, July 9, 2022 10:39:01 AM
To: Elecraft
Subject: Re: [Elecraft] Wanted: KPA100 Amplifier for K2
Take out the screws, remove the KPA100 top disconnecting RF and 12V
molex cables, find LP top, conn
Take out the screws, remove the KPA100 top disconnecting RF and 12V
molex cables, find LP top, connect RF and 12V molex cables from LP top,
install screws. Required tools: small screwdriver. Cautions: see below.
Time: 10 min.
Make sure you get the two molex cables into the right connectors
Hi Bill & list -
I bought a K2 from someone on the list and it came with the KPA100, which I
tried out (works fine) but am not likely to use. If I can figure out how to
uninstall it, it will be available. I'll just need to go through the manual
and make sure I can reinstall components (if any)
I built the HardRock 50 Kit to use with my K2, works nice, but only 50
watts out.
https://www.hobbypcb.com/index.php/products/hf-radio/hardrock-50-hf-power-amp
Gordon - n1mgo
On 7/9/2022 12:00 PM, William Santos via Elecraft wrote:
Hello All,
I'm going to be building an Elecraft K2 soon,
Hello All,
I'm going to be building an Elecraft K2 soon, which comes stock with 5W.
I'd like to have more power for phone Dxing, but the optional KPA100 amplifier
is no longer made by Elecraft.
So I'm looking for a KPA100, kit or assembled, as well as the KAT100 antenna
tuner for the KPA100.
5 matches
Mail list logo