Hi Steve Yes that 30-80 module was a bit tricky but was nice to have. I have about 69ma on 80 meters in receive but not sure what to advise. There are some pretty sharp guys on here that may have some ideas but thought I'ld let you know what readings I had. I also found the atu was a bit touchier than the K1,K2 but with some patience it would work great.
Werner N8BB KX1 sn 1656 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Steve Watkins Sent: Saturday, May 19, 2007 1:10 AM To: elecraft@mailman.qth.net Cc: Watti Subject: [Elecraft] KX1 High Current Just completed the 3080 module...more challenging than the KX1 itself. I am experiencing higher current on 80 meters than the manual suggests (65 ma).. I'm seeing 106 ma. This is with the board on the bench, not in the case. I've noted at other places in my Elecraft building experience that the recommended current in the manual has been lower than what is ammended through discussion and errata's ?? Is 106 ma acceptable? Receive on 20 and 40 seem fine. Thanks, Steve _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
