responded, all very helpful suggestions and ideas.
73
Andy
http://gd0tep.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of gd0tep
Sent: 02 October 2008 19:17
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] Elecraft K3 + Microham?
Further to this one
Yes, a Digi Keyer - with a Mac and MacLoggerDX
73 de M0XDF, K3 #174
--
It is almost impossible to carry the torch of truth through a crowd
without
singeing somebody's beard. -George Christopher Lichtenberg, scientist
and
philosopher (1742-1799)
On 2 Oct 2008, at 17:02, gd0tep wrote:
A
Further to this one.
Details I missed out:
Microham USB Interface 2, complete with Microham lead.
When trying to TX WSJT tones for a test, I get the following results:
On Data A, no signal at all.
AFSK A, no signal at all.
FSK D, solid tone when it should be alternating tones
PSK D, sounds like
Looking at the wiring diagram for the USB keyer it seems you may have the audio
lines reversed. The Microham K3 cable labled Line OUT should connect to the K3
Line Out on the rear panel and the Line IN on the cable should go to the K3
Line In.
It looks like the PTT line is connected to the K3
By the way, External interfaces are not used at all with the K3 in PSK-D mode.
This is only for PSK operation when sending with paddles connected to the K3's
internal keyer. There is no provision for external keying of PSK-D as there is
for
FSK-D.
So with your soundcard program you have
5 matches
Mail list logo
