Hi Larry:
I have a question about hooking up the P3 to the K3 12vdc out.
I'm using a cable of your design and it's been really great.
I'm using that output for the 12vdc sense voltage to turn the Quadra
on and off.
My P3 will be here Monday.
It seems to me the that cable they supply is made
Dusty, I tried to reply direct but your Verizon account bounced the
message:
Delivery has failed on the enclosed message for the following
reasons reported either by the mail delivery system on the mail
relay host or by the local TCP/IP transport module:
550-JunkMail rejected
I use a quadra with my K3 and it works just great. No problems at all.
And you don't need to loose access to the K3 accy connector.
A company called Windford makes a breakout board for HD15 connectors
just like the one in this link. The link is for a DB9...they don't show
the HD15 on the
Kent,
There is the Guy in Jeff City I know that is using one
GRIN
73 de KA0OUV
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of K9ZTV
Sent: Saturday, December 13, 2008 14:19
Cc: elecraft@mailman.qth.net
Subject: [Elecraft] K3 AND QUADRA
Would
My apologies. Intended for Mr. Trimble only.
Tim Raymer
73 de KA0OUV
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Quadra plus K3 works FB. Do the ALC mod, install the pull-up
resistors for the automatic BCD bandswitching, wire up the cable to
interconnect everything, and enjoy.
Jerry W4UK
At 03:18 PM 12/13/2008, K9ZTV wrote:
Would appreciate those driving a Quadra with their K3 contacting me
: Saturday, December 13, 2008 7:59 PM
To: K9ZTV
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 AND QUADRA
Quadra plus K3 works FB. Do the ALC mod, install the pull-up
resistors for the automatic BCD bandswitching, wire up the cable to
interconnect everything, and enjoy.
Jerry
Jerry,
How did you wire your interface?
Did you use Band Data 1 (DIN8/262) or Band Data 2 (DB15)
on the Quadra?
What are the symptoms (No go)?
Remember, the pin numbering on Band Data 1 (DIN8/262) is
different than the standard DIN8 - pin 6 on the standard
connector is pin 7 (D) on
According to the schematics, the Quadra does not have the internal
pullups like the FL-7000 does (the FL-7000 is known to work with the
K3) . I finally got out my Quadra tech supplement during a lull in
yesterday's RTTY contest and and traced out the band data lines. No
pullups, and the
9 matches
Mail list logo
