Dear all
As I don't own a KX3 I was not able to take any photos of the new stand
with one in place. However, the first ones are now arriving and Carl M0SER
has sent me some photos.
http://tinyurl.com/KX3Stand
I think that it looks pretty cool!
...maybe I need a KX3 after all.
73 Richard G3CWI
I prefer the Nifty Stands over those, much neater and with the smoked stand
goes very well with the radio. I don't know about those stands but the Nifty
stand and the radio both have no movement at all, the KX3
73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 5210--K2/100 # 6470-KAT100
P3/SVGA--KAT500--W2
Amp
For me it looks like the paddles are positioned too high above the desk on this
stand?
73 de Hal
On 13-11-07, Richard Newstead wrote:
> Dear all
>
> As I don't own a KX3 I was not able to take any photos of the new stand
> with one in place. However, the first ones are now arriving and Carl M0
#1)
I have my SVGA resolution set to the native resolution of my Samsung 20"
monitor, 1440 X 900, but the status bar on the bottom line is being cut off.
Unfortunately the monitor display can only be shifted up or down; it can't
be shrunk vertically.
I didn't notice the problem when I was using t
At some point in the past there was a conversation regarding a removable
or remote faceplate for the K3. Something along the lines of the Kenwood
TS-480. Whatever happened to the idea?
__
Elecraft mailing list
Home: http://mailman.qth.n
One thing that stumped me and cause me all kinds of grief was what button I
was pushing.
Reminder to those who may not know. The Internal K3 tuner runs when you
press ATU TUNE
The external KAT500 tunes when you push and hold the XMT button.
If you tune internally the external KAT will show all ki
William,
I know exactly what you mean.
It would be a nice feature that when I press the tune button on the
KAT500, it would key the K3 at the same time and put theKPA500 in
standby (if you have one).
Elecraft shines in clever layed out equipment and firmware. This would
be a logical feature
Bill,
There were actually pictures of that. The K3/0-mini it was called. It is
an interesting product.
There is a video on youtube, just look for K3/0 mini .
Arie PA3A
Bill W2BLC schreef op 7-11-2013 15:00:
At some point in the past there was a conversation regarding a
removable or remote
Hi again from Ken W0CZ
Last summer I had Rocky working on my Toshiba laptop using a Griffin iMic as a
stereo input for the I/Q on my KX3. I wanted to have a display similar to the
P3 on my K3. It worked and I put it aside. This week end I entered the ARRL
SweepSteaks and wanted to use Rocky aga
> 1 Get the iMac to work with Windows 8.1
Open the Windows Sound Control Panel.
Select the Recording tab
double click the iMic (probably Microphone)
Select the Advanced tab
Change the Default Format to "2 channel, 16 bit 48000 Hz (DVD
Quality)" or a higher sample rate if the iMIC supports it.
Wonderful idea Arnie; especially if you want the "2nd" tune.
73 George AI4VZ
--
From: "Arie Kleingeld PA3A"
It would be a nice feature that when I press the tune button on the
KAT500, it would key the K3 at the same time and put theKPA500 in
stand
I was sitting here thinking about how I hadn't tried any SDR applications since
upgrading from Win 8 to 8.1, so I thought I'd give it a quick try. The first
thing I found that I needed to do was exactly what Joe suggested, "Widows
generally selects "1 channel" as the default for any USB microph
Hi to the group and thanks to Joe W4TV. I followed your advice and found the
default settings were wrong but after I corrected them it still did not work. I
found the gain was set no nothing and I reset the gain wide open for the iMic.
I then booted the computer and now everything is just the wa
K1, SN 1976 with 1.09E firmware, 4 band module and ATU. It's been
working flawlessly since I built it around 2005 or so.
It works fine on receive and transmit on all bands except that when
changing bands it displays 7, 10, 10, 21. Though indicating 10 mhz, it
works fine on 14 mhz, but the disp
Some SDR software will set up the sound device completely I.e. set the device,
channels, sampling rate levels explicitly while other will take the system
defaults. In these cases I.e. rocky it will use whatever is the current default
in windows.
Tom
Original message
From: K
It sounds to me like a menu setting for band 3 and not a hardware problem.
73 - Mike WA8BXN
---Original Message---
From: EricJ
Date: 11/7/2013 1:16:28 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K1 Band Display Problem
K1, SN 1976 with 1.09E fir
Hi Jim,
#1) Try turning off the auto mode on your monitor. The P3/SVGA may be
outputting a pixel clock that is incompatible with your monitor. Also, just
as a test, change the P3/SVGA resolution down to 1024x768 and see if the
screen fills correctly.
#2) Currently there is no way to display
Hi Eric, You can reset that display, by going to the manual for the 4 band
filter.. and resetting theb3 setting. Basically, go into the menu, select b3,
use the band button to select 14.. back out of the menu.. and it will be all
happy. Good Fun, this.
Have a great day,
--... ...--
Dale
Thanks Mike and Dale. That was the problem. Maybe I screwed it up in the
dark at the campsite. I use this radio a lot at home and in the field,
but nothing ever goes wrong with it so I have little opportunity to
learn much about how it works inside. No doubt I set that up in 2005
when I built i
, N0TA
__
George Danner
<http://www.mail-archive.com/search?l=elecraft@mailman.qth.net&q=from:%22George+Danner%22>Thu,
07 Nov 2013 07:52:48 -0800
<http://www.mail-archive.com/search?l=elecraft@mailman.qth.net&q=date:2013
Hi again from Ken W0CZ
My first problem got fixed so nice I will hope for help on this one. I have SDR
software on my iPad and a camera connection kit to connect an iMic. This set up
works well but of course the battery does not last long enough for field day or
a week of camping. Is there a way
Can you share the recommendations? I have a USB 3 powered hub that I love but
it generates terrible interference on 20m. I just realized this after your
post.
Thanks
Alan
K2ACK
Sent from my mobile device.
> On Nov 6, 2013, at 16:57, Joel Black wrote:
>
> I had a couple of suggestions. Than
Just had a totally weird SWR problem on 15 meters. Was trying to work the T33A
Banaba Island DXpedition and the KAT500 antenna tuner kept jumping into tune,
and faulting the KPA500 on Hi Reflected power. Everything worked fine on all
other bands except 15. Checked all the connections and cabl
Eric,
You inadvertently changed a menu setting.
The band that is displayed is a menu setting. Enter the menu and scroll
to the "b3" setting - if it shows "b1" (or some different number), tap
BAND until to changes to b3 - then EDIT the parameter - tap BAND to
change it to 14 mHz.
73,
Don W3
John,
That sounds equally good.
Let's hope somebody at Elecraft picks this up. It will smoothen the
operation of the K3-line still more.
BTW, I had the K3-KPA500 combo with me on the TN2MS DXpedition in
October. Without the KAT500 ( not need for it there). That was smooth
operation from C
Interesting pictures, but what happened to it? Any idea if it will get
produced?
Thanks,
Bill W2BLC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:E
Great Read Jim!
--
From: "Jim Sheldon"
Sent: Thursday, November 07, 2013 3:14 PM
To: "Elecraft Mailing List"
Subject: [Elecraft] Weird 15 meter problem
Just had a totally weird SWR problem on 15 meters. Was trying to work the
T33A Banaba Island
Has anyone found or using a small monitor to use with a P3/SVGA? I have limited
space but would like to use the features of the SVGA adapter on a screen a
little bigger than the P3. I've seen some small ones on various online outlets,
but they are either VGA resolution, or use a USB connection.
Wanted a XV 432 in any condition electrical condition, but case must be good.
E mail with what you got. at w0...@yahoo.com
Thanks, Bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.
On 11/7/2013 1:04 PM, Tim Cook wrote:
Has anyone found or using a small monitor to use with a P3/SVGA? I have limited
space but would like to use the features of the SVGA adapter on a screen a
little bigger than the P3. I've seen some small ones on various online outlets,
but they are either V
Yes, it's coming. It has appeared, working, at hamfests. I suspect it is
being tweaked for production at Elecraft. Neat product!
/Rick
On Thu, Nov 7, 2013 at 12:38 PM, Bill W2BLC wrote:
> Interesting pictures, but what happened to it? Any idea if it will get
> produced?
>
> Thanks,
>
> Bill W2
A 15" monitor is 11" high.
Product dimensions without stand (W x D x H)
13.8 x 2.2 x 11.0 in (35.0 x 5.5 x 28.0 cm)
Hth
73 kc2vmp
> On Nov 7, 2013, at 16:04, Tim Cook wrote:
>
> Has anyone found or using a small monitor to use with a P3/SVGA? I have
> limited space but would like to use the
Does anyone know specifically where I can download Spectrogram? All the
downloads I find just lead to pop-ups to third party download sites with
unrelated garbage software. I can't even find Spectrogram's website, is it even
a current supported program?
Chris Ishmael KK0G
__
Chris,
Spectrogram is no longer a supported program - the author is no longer
'in business'.
However, before stopping support, the author announced that version 16
would be freeware. Version 5.17 had already been made freeware before
that time.
If you look on my website www.w3fpr.com, near th
On 11/7/2013 8:37 PM, Don Wilhelm wrote:
Spectrogram is no longer a supported program
With permission of the author, the last public version is on my
website. Scroll down to find it. http://k9yc.com/publish.htm You're on
your own -- although I used it ten years ago to tweak my K2s, I know
Just out of curiosity, has anyone been able to run Spectrogram on Windows 7
or Windows 8. I haven't had any luck, and would like to reset my filters.
Tom F
KI6NRD
Elecraft K2 #7432
__
Elecraft mailing list
Home: http://mailman.qth.net/mai
36 matches
Mail list logo
