I am wondering if any other K2 user has experienced the following.
NO receive when NOT on transmit.
VERY occasionally I get the my K2 stuck on what seems to be transmit.
If I press the MODE button to select the VOX function the display shows SPCH
0.2
then returns to the frequency display
Ron
You hit it on the button (sic) do not know how it got changed but that worked.
Now I do not need another rig in shack on to hear side tone.
Tnx a bunch.
Tim W4YN
From: Ron D'Eau Claire [EMAIL PROTECTED]
Tim, you've probably been bit by the by the sidetone source demon.
Go into the menu,
Hi
I found a strange behavior on my K2/100
When pressing the button display I do hear a beep, but no change on the display
I do expect to get the voltage reading and the current, but got still the frq.
display
A long press on display for ALC/RF rthe info doesn't come up.
End up with a total
Yesterday I put in-line my new KAT100 autotuner. This
event marks yet another works 100% the first time
Elecraft kit. In fact, except for a single resistor I
installed incorrectly in 1999, *ALL* of my Elecraft
kits have come up, first-time, 100%.
Recently I saw a thread about kitbuilding
Does A4 mean 14 in Spanish? I hear Zones of A4 from EA7 stations. My map
says 14 but my Español es muy stinko.
Dan / WG4S / K2 #2456
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
John, KI6WX wrote:
Last summer, I had several folks track my location as I solo hiked
through the Wind River Mountains on an historical exploration trip. I
used a KX1 to send out my evening GPS location. The historical
results of that exploration are now posted on the web at:
On Nov 28, 2004, at 7:08 AM, Dan Barker wrote:
Does A4 mean 14 in Spanish? I hear Zones of A4 from EA7 stations. My
map
says 14 but my Español es muy stinko.
Hi Dan,
A4 is just a truncated-elements form of 14. Below is G0UKB's
succinct explanation from a posting to our reflector on Nov.
Someone posted about getting a new mic as a gift, and
the desire to make the one mic operate across several
rigs.
This is actually quite do-able if you're handy and
wish to make an adapter as mentioned. I've done this
and was very happy with the results.
I used an inexpensive small enclosure
Dan
In CW jargon:
A is short for 1, as T is short for 0, as N is short for 9, as
R is short for the decimal point.
Alan, N3BJ
- Original Message -
From: Dan Barker [EMAIL PROTECTED]
To: Elecraft elecraft@mailman.qth.net
Sent: Sunday, November 28, 2004 10:08 AM
Subject: [Elecraft]
'A' is the shortened form for '1' on CW, Dan. People who send 5NN
instead of 599 understand all the shortened CW figures (I think!).
73 de David G4DMP
In a recent message, Dan Barker [EMAIL PROTECTED] said
Does A4 mean 14 in Spanish? I hear Zones of A4 from EA7 stations. My map
says 14
Roland,
Elecraft kit building time definitely qualifies as theraputic sick leave!
Have fun.
72,
Bruce
N7CEE
K2, KX1
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
Stewart,
You may want to monitor the state of '8R', '8T', and 'MUTE' signals in the
K2 during such occurrances. That may give you a bit of information about
where to begin looking for the source of the problem.
73,
Don W3FPR
- Original Message -
From: Stewart Baker [EMAIL
thanks for some good information about my K2 and options. Time to unsubscribe.
73
W9VNE
Jim Danehy
Cincinnati, Ohio
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
Our fearless NCS, Kevin, wrote:
I wandered into Home Depot this evening and
purchased a bit of 14 guage wire. I will try to get a loop up for 160
which should tune quite nicely for the higher bands. Now to get some
ladder line from HRO this coming week and get it hooked up.
This
On Sun, 2004-28-11 at 10:43 +, Stewart Baker wrote:
If I press the MODE button to select the VOX function the display shows SPCH
0.2
then returns to the frequency display with the mode (U or L) flashing.
With no microphone connected and the POWER control fully ACW their is no
received
KXBill wrote:
The practice of cut numbers dates back to WW2, maybe further.After that,
it was a common practice on commercial circuits.
-
I've held a commercial CW license since the 1950's. While I wasn't working
as a commercial CW op all the
I read recently that a VLF station in Russia UT0 something received
permission to use the long T instead of the 0 for QRSS.
I remember when I was a novice in the 60's being told never to use the
long T in a callsign.
The ID question is interesting. I know that CW holds a special place,
but
hello all.
name is mike prevatt. call ku4yp. looking to build a k2 in the not too
distant future so thought i'd subscribe to the reflector. hope everyone had
a happy thanksgiving and look forward to talking with you all soon.
73 de KU4YP Real Radios Glow in the Dark
Mike Prevatt
Thanks to Don and Ron for their detailed help, I think I'm on the right
path to fixing this now.
-doug
On Nov 28, 2004, at 12:22 PM, Doug Forman wrote:
I use inexpensive (now discontinued) Radio Shack bench volt and
ammeters when I am combining rechargeable batteries and a small solar
panel
Mike,
Welcome to the reflector. This is the place to ask any questions you may
have about Elecraft equipment and to ask about any possible problems you may
run into while building the K2 (afterwards too). I am certain you will
enjoy the K2 and its build process.
If you really like think
KIO2 simplex?
To whom it may concern.
Elecraft K2 #4487 with all options except the KPA100 and internal battery is
now up and running flawlessly, except for the KIO2 option. Connected to a
computer running Hyperterminal (Win XP Pro - all updates) I can send the
test message from the K2 to
Tom:
Sounds like the computer side of the cable needs the CTS signal jumper,
or maybe the computer needs the rts signals turned off.
Also check the 10 uh choke on the kio2. It is easy to open one if you
accidently get a short.
--
Phil Carter, WD8QWR
QRPARCI #9986, CQRP #3
Fists #6514, FP
Hello All,
20 meters was fun and 40 meters was a bit of trouble this evening. 20
meters started with me sitting on frequency listening to the testers madly
sending code. Could not help myself so I exchanged info with N0IJ. My
one official contest contact during the 48 hour period. I
Even tho the bands are not dead, here is a good question.
What is the Prefix for an Italian station located in Africa?
Hint: Actual Italian call, starts with an I, No /
1st Correct answer wins an official W6KY weather forecaster.
Hang it outside the shack.
If it's Wet - It's raining
If it's
Art, W6KY wrote:
What is the Prefix for an Italian station located in Africa?
==
Years ago I5 was Italian Somaliland, but it no longer belongs to Italy.
73, de Earl, K6SE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Sorry Earl...It's current and I worked it in the CQWW this
weekend. These are always fun. Like KC4AAA. Another FL
station? No, the South Pole!!!
73, Art
Earl W Cunningham [EMAIL PROTECTED] wrote:
Art, W6KY wrote:
What is the Prefix for an Italian station located in Africa?
==
Am Montag, 29. November 2004 05:52 schrieb Art - W6KY:
What is the Prefix for an Italian station located in Africa?
This must be IH9, I think.
73 Wolf, DL2WRJ
--
* Registered Linux user #37136 http://counter.li.org
* Suse Linux 9.1pro, AMD Sempron 2800+, SIS 748
* Matrox MGA-450, 1GB/120GB
*
27 matches
Mail list logo
