HelloThe latest release of Win4K3 Suite now includes the ability to have cc
cluster spots displayed on the spectrum scope. It is possible to display only
the spots, or also who the spotter is. Clicking on the spot or double clicking
in the waterfall will QSY to the frequency. Spots are
Good suggestions, Hans, noted for a future release. Some have been mentioned
previously.
73,
Wayne
N6KR
On Jan 9, 2015, at 11:32 AM, Hans J Rasmusen OZ7BQ oz...@yahoo.dk wrote:
Hello,After about 2000+ QSOs with my KX3 please allow me to suggest a few
items, that may improve the operations.
Roland,
I have never seen that kind of problem. It does sound like something
may be corrupt in the EEPROM.
You may want to try resetting the K1 to factory defaults (which wipes
out your menu settings and replaces them with the stock factory defaults).
Before you do that reset, record all your
Hi Don,
i did all the steps Mike suggested to me - some more e.g. resoldering some
suspicious pads. The K1 is still in the workbench. I will start building the
internal atu, but will first fix this issue.
Before resetting the radio i will put a small audio/video file on the
internet, and give you
With backlight on, RX current should be roughly 170 to 230 mA (no AF signal)
depending on band.
TX current at 5.0 W should be about 1.0-1.4 A in CW/FM/FSK-D modes and 1.4-1.8
A in SSB/AM/PSK-D/DATA-A/AFSK-A modes. Actual current will vary with band and
antenna load impedance.
The reason 5.0 W
This simple response to a current requirement question is also a testament to
the amazing design decisions used to make this little gem what it is.
Designing products for a hobby you are passionate ( and participate) in
produces amazing products.
Thanks Elecraft
--
View this message in
Very cleverly done, Wayne:-)
Phil W7OX
On 1/9/15 3:26 PM, Wayne Burdick wrote:
The reason 5.0 W current drain is lower in CW/FM/FSK-D modes is that the KX3
uses its higher-impedance PA transformer winding at this level. The upper limit
for use of the high-Z winding is 5.0 W in CW/FM/FSK-D
Here are some numbers I measured, transmit was with a CW carrier:
TX Current
RX Current
Band5W* 10W*15W 20W 25W
With KXPA
60 1.17A 2.22A
FYI, streaming to the Phonak ComPilot does wear the battery down in a few
hours, you can keep it plugged in to the charger while using it (provided
you are not moving around, of course!).
I've mentioned this on at least one other group, but will repeat it here for
those who haven't heard it.
FYI, streaming to the Phonak ComPilot does wear the battery down in a few
hours, you can keep it plugged in to the charger while using it (provided
you are not moving around, of course!).
-
Steve
AA6VO
--
View this message in context:
Hello,After about 2000+ QSOs with my KX3 please allow me to suggest a few
items, that may improve the operations. Please bear with me, if I have missed
something.
1) When the KX3 is switched off with the RIT activated, RIT will be off when
the rig is turned on again, even though the RIT symbol
On Fri,1/9/2015 9:35 AM, inventor61 . wrote:
The problem is also experienced by others, according to the many private
responses I got, there appears to be a bug in the hamlib file for the K3,
and the authors are apparently aware of it.
Right. I lurk on the WSJT developers' list, and reported
Roland_DF1OE wrote:
Last Year i built my k1 #3310...
Excellent choice!
I ve a little problem - may be it is quite normal...
What you describe below is very abnormal.
during sending cw the sidetone is very very loud - louder as it is during
adjusting ST_L and much louder than testing it
Mr. Inventor61 (call??) - I’ve been running my K3 (full K-Line here, too) with
WSJT-X v1.3, r3673 for quite some time with no problems. WSJT-X is able to
control the rig’s band setting and I also use the split feature with no issues.
I’d be glad to compare settings with you if you’d like. It
James
Thanks for your reply. For some reason my name-and-call signature line got
chopped off my initial reflector posting.
I have the new WSJT-X v1.4 installed now.
The problem is also experienced by others, according to the many private
responses I got, there appears to be a bug in the hamlib
Trying to do some planning for Field Day battery operation. We are
planning to use a KX3 at 5w, CW.
Could someone(s) give me a feeling for RX current draw. I would like
this to be with the Backlight ON, and other normally ON functions
activated. Likewise, what current draw should we see with
On Tue, Jan 6, 2015 at 6:47 PM, Jim Brown j...@audiosystemsgroup.com wrote:
On Tue,1/6/2015 11:10 AM, Don Wilhelm wrote:
The K3 Line In and Line Out jacks are stereo type, but there is no
connection to the ring contact
That's true only for a single-RX K3.
There certainly is a connection to
On Fri,1/9/2015 5:03 AM, Mike Reublin NF4L wrote:
There is a known K2/K3 problem.
The problem is ONLY with rig control -- if you run it manually, with no
rig control, it works fine. That is, set the rig suppressed carrier
frequency for the band you want, use JT65 below about 2 kHz audio, JT9
For me, it happens *more* when WSJT-X is not the focus. I run OS X 10.10.1.
The problem doesn’t disappear when WSJT-X has focus, but it’s not quite as
aggravating. I usually just hit whichever button doesn’t shut the program down
(I forget which that is now).
73,
Joel - W4JBB
On Jan 9, 2015,
First, let me thank all of you who generously shared your advice about
interesting, warm places to spend the holidays and Be the DX.
I have acknowledged some of your suggestions personally. I will get to
the rest of you shortly.
73 de Jim - AD6CW
* On 2015 09 Jan 07:04 -0600, Mike Reublin NF4L wrote:
Yep. There is a known K2/K3 problem. They're working on a
solution. The program uses HamLib to interface with the radio and it
apparently is the problem. I can't imagine what the problem is, and
they won't tell me. The K3 (and I suspect
John,
The VFO B Altermate display when set for current will tell you that
information for your particular KX3.
The manual says receive current will be in the range of 150 to 200 ma.
and depends on backlight, preamp isolation amp and whether or not the
internal speaker is used.
I have not
Hi OMs,
let me ask if anybody will consider folowing as useful Option (option - used
when needed :-)):
- in K3 with KAT3 ATU unit (it means with 2 ant outputs ANT1/ANT2) to have
possibility of different output power set by ANT port.
Simply in menu CONFIG: PWR SET new option PER-ANT
Why? If I
A long shot, but does anyone have a spare K3 bail they would like to sell. I
just need the bail, but feet would be fine too.
73,
Dale W4OP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi Dick,
good idea! I have to check N1MM and K3 Macros docs.
(or any ready-made such a macro to copy/paste?)
But still fw option is fw option
-dst-
-- Původní zpráva --
Od: Dick Dievendorff d...@elecraft.com
Komu: alexandr.kobra...@seznam.cz
You might set up a command macro that switches antennas and changes power
levels, using the AN and PC commands.
73 de Dick, K6KR
On Jan 9, 2015, at 12:51, alexandr.kobra...@seznam.cz wrote:
snip
- in K3
different output power set by ANT port.
menu CONFIG: PWR SET new option PER-ANT
Yep. There is a known K2/K3 problem. They're working on a solution. The
program uses HamLib to interface with the radio and it apparently is the
problem. I can't imagine what the problem is, and they won't tell me. The K3
(and I suspect all the Elecraft line) has a very straightforward
I don't have a problem, but I let dxlabs commander talk to the radio and
configure WSJT-X to use dxlabs.
Gordon - N1MGO
On 01/08/2015 10:13 PM, inventor61 . wrote:
I have tried the last two versions of WSJT-X and there seems to be some
problem with the rig control for the K3. I get error
Last Year i built my k1 #3310 - i got one of the last 4-Band filter boards.
With the k1 i had some fun as TF/DF1OE/p last year in iceland... Just built
the k1 for this adventure with a tent and backpack.
I ve a little problem - may be it is quite normal, i do not know.
during sending cw the
Greetings;I have found the SSB board for my K2 that I inquired about on the
list. Thanks so much.
Jacob K4JQV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
30 matches
Mail list logo
