[Elecraft] KXPD2 shipping?

The website says June 28th, but I haven't heard anything on my order. No rush, just curious. Bruce __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] KPOD

Hopefully tomorrow! 73, Eric /elecraft.com/ On 7/4/2016 12:19 PM, Tom Morehouse wrote: Received my KPOD on Thursday, but just hooked it up today. First item: you must have beta firmware 5.50 installed for it to work. item two: manual states that you must have K3 Utility Program rev

Re: [Elecraft] R: OT - Neumann vs. Heil Michrophone

Folks, lets end this thread in the interest of relieving email overload for others. 73, Eric Moderator etc. /elecraft.com/ On 7/4/2016 6:34 PM, Gary wrote: Some ops like bassy audio, it is really tough to understand the audio due to my damaged hearing so I don't call, added to ESSB further

Re: [Elecraft] R: OT - Neumann vs. Heil Michrophone

Well, find me a "crowded" band anytime other than during incessant contacts, and I'd agree. 40 in the afternoon, or most bands most any time are not crowded, except during the occasional appearance of a sort of rare one ... which is rare. Grant NQ5T Sent from my iPhone > > Not good to use

Re: [Elecraft] OT - Neumann vs. Heil Michrophone

No No not K3 = Big Macits SSB and even AM audio in general = Big Mac David Moes VE3SD --- Original message --- Subject: Re: [Elecraft] OT - Neumann vs. Heil Michrophone From: "Dr. William J. Schmidt, II" To: Date: Monday, 04/07/2016 9:11 PM

Re: [Elecraft] R: OT - Neumann vs. Heil Michrophone

Some ops like bassy audio, it is really tough to understand the audio due to my damaged hearing so I don't call, added to ESSB further exacerbates the problem I have. I have ESSB with a 2.8Khz bw and set for a "punchy" audio for when condx are tough, normally I use settings suggested by Jim

Re: [Elecraft] R: OT - Neumann vs. Heil Michrophone

Not good to use at all,,, way too broad for crowded bands , Bob K3DJC On Mon, 4 Jul 2016 18:53:36 -0600 Ken G Kopp writes: > In the same category as gold-plated speaker wire. (;-0) > > Kudos to Elecraft for limiting TX audio to 4 KHZ, regardless of > filter > selection.

Re: [Elecraft] R: OT - Neumann vs. Heil Michrophone

Ken, Exactly. Gary -Original Message- From: "Ken G Kopp" Sent: ‎5/‎07/‎2016 10:54 AM To: "elecraft@mailman.qth.net" Subject: [Elecraft] R: OT - Neumann vs. Heil Michrophone In the same category as gold-plated speaker wire. (;-0) Kudos to

[Elecraft] R: OT - Neumann vs. Heil Michrophone

In the same category as gold-plated speaker wire. (;-0) Kudos to Elecraft for limiting TX audio to 4 KHZ, regardless of filter selection. ESSB is an abomination on the amateur bands! 73! K0PP On Jul 4, 2016 5:09 PM, "Jim Brown" wrote: > On Mon,7/4/2016 2:43 PM,

Re: [Elecraft] OT - Neumann vs. Heil Michrophone

Never understood why one would spend so much on a mic. even AM or ESSB a mic like that Neumann TLM 103 mic is way overkill its sort like drinking a Dom Perignon with a Big Mac. any reasonable sounding mic will have better audio than the best sounding SSB transmitter will need.

Re: [Elecraft] Panadapters for a MM station using 4 K3s

The P3 does have a noise blanker, which works well on impulse-type noise. It allows you to see more-or-less the same signals that the K3 sees when its own noise blanker is turned on. Alan N1AL On 07/04/2016 08:46 AM, Don Wilhelm wrote: John, NaP3 can play through the computer speakers to

Re: [Elecraft] R: OT - Neumann vs. Heil Michrophone

On Mon,7/4/2016 2:43 PM, glcazz...@alice.it wrote: It seem to me too much for an ham radio station. Wretched excess. Comes under the heading of a fool and his money are easily separated. :) I own about a dozen Neumann mics that I use for recording. I use a Yamaha CM500 in my ham station.

[Elecraft] R: OT - Neumann vs. Heil Michrophone

The Neumann are the top of studio microphones, the best of the best. Used also on radio diffusions. It seem to me too much for an ham radio station. But if you can buy it, it is sure a greatest microphone! Ian IK4EWX Invio eseguito dallo smartphone BlackBerry 10.   Messaggio originale   Da:

[Elecraft] OT - Neumann vs. Heil Michrophone

I have my ESSB and AM higher fidelity hat on. Seeking opinions on the Heil PR 40 vs. the Neumann TLM 103. David Ahrendts, KK6DA, Los Angeles David Ahrendts davidahren...@me.com __ Elecraft mailing list Home:

[Elecraft] HD Monitor for P3 SBGA

Another possibility is an SVGA switch. Many are available at $15 or so, some of them attractive enough for the desktop. I use a single Dell 19”, using a SVGA cable to the DB15 on the switch box, one input from the SVGA output of the P3 and the other through an Apple cable from the thunderbolt

[Elecraft] KPOD

Received my KPOD on Thursday, but just hooked it up today. First item: you must have beta firmware 5.50 installed for it to work. item two: manual states that you must have K3 Utility Program rev 1.16.3.11 to store macros 9-16. I couldn’t find any utility later than 1.15.6.27. Must be

Re: [Elecraft] Panadapters for a MM station using 4 K3s

LP-Pan and NaP3 cannot change the audio output of the K3. The audio output that can be changed is only the audio from the computer. The K3 has NR and NB capabilities that can do the same thing for the K3 audio output, just choose the most effective parameters of the K3 NR and NB for the task

Re: [Elecraft] Elecraft K3S USB to Key Transceiver

With HRD, I have set the k3's PTT KEY to RTS-DTR. With N1MM, I set the K3 to RTS-DTR as well, and in the program, I set DTR to CW, and RTS to PTT. Hope this helps. Gene N4FZ -- View this message in context:

Re: [Elecraft] Please recommend an HD monitor to use with P3SVGA

On Mon,7/4/2016 2:27 AM, Mike K2MK wrote: The problem with recommending a model number is that within a year of purchasing a monitor it is usually superceded by a different model. Yes. A year or two ago, I discovered a 24-in Samsung at Costco that runs from a nominal 14VDC wall wart. It's an

[Elecraft] Panadapters for a MM station using 4 K3s

Bill, if you do CW contesting, then you will want to add CW Skimmer to the software lineup as well. I use the following setup for CW contesting: K3s IF out to LP-Pan LP-Pan I/Q out to Asus U5 USB card U5 USB to PC; use MME audio driver, which allows feeding the audio to multiple programs

Re: [Elecraft] Panadapters for a MM station using 4 K3s

Don, I was looking at the LP-PAN YouTube video where they demonstrated noise reduction that made weak dx signals audible on the K3S where they were not audible without the LP-PAN. Is this really the case? John WA1EAZ Sent from my iPhone > On Jul 4, 2016, at 11:46 AM, Don Wilhelm

Re: [Elecraft] Panadapters for a MM station using 4 K3s

John, NaP3 can play through the computer speakers to act as a 2nd receiver (but there will be latency dependent on the computer). That is where the NaP3 NB is useful. I do not understand that a NB function would be valuable on the spectrum display. I want to see the noise sources that may

Re: [Elecraft] Panadapters for a MM station using 4 K3s

Don, LP-PAN advertises noise reduction. Does the P3 do similar? John WA1EAZ Sent from my iPhone > On Jul 4, 2016, at 11:27 AM, Don Wilhelm wrote: > > Bill, > > The least frustration route is to use the P3 with the SVGA option (and > perhaps the TXMON option). > >

Re: [Elecraft] Panadapters for a MM station using 4 K3s

Bill, The least frustration route is to use the P3 with the SVGA option (and perhaps the TXMON option). Certainly the LP-Pan/NaP3 or Win4K3 route will be less expensive, but requires getting the applications working right on the computer. So the tradeoff is between using the hardware

Re: [Elecraft] Panadapters for a MM station using 4 K3s

I would go the LP-Pan2 or good SDR route simply from a cost perspective. Price a P3+SVGA+Dedicated monitor x 4 vs. LP-Pan/SDR route. LP-Pan runs on the computer I assume you've already got for logging. If you want you can upgrade the sound system relatively inexpensively to an outboard USB

Re: [Elecraft] Help sell me on the K3S

‎To put it simply. Ive had a K3 for many years.   And have kept up to date with what is available.  Looked at Flex. Icom Hilberling. Etc   The only Rig I would consider trading my K3 for would be  a K3s.      Original Message   From: Wes Stewart Sent: Monday, July 4, 2016 9:59 AM To:

Re: [Elecraft] Help sell me on the K3S

Even Rob will tell you that one number does not a radio make. Personally, for the most bang for the buck, I would be looking at one of the many non-S K3s that guys like me who have upgraded to a K3S are now offering for sale. I'm allowing mine to gather dust on the floor, because I've found

[Elecraft] Panadapters for a MM station using 4 K3s

I sent this message this before the Dayton Hamfest and with all the traffic on the New KX2 and the KPod I didn't receive but two replies, so I'm going to try again to see if I can't determine the best path forward. I'm leaning away from the P3 and more towards a SDR or LP Pan approach.

Re: [Elecraft] Please recommend an HD monitor to use with P3SVGA

I realize this is off the topic of which monitor to get, but multiple monitors do take up more space. The idea of mounting a monitor, or monitors on arms does address the issue of desk space, but I decided against that due to the cost issue, and those arms still need to be mounted on something.

Re: [Elecraft] Help sell me on the K3S

Reuben, If you do not need Tx - why not just go for a high end SDR Rx. Lots of really good products out there at the moment - and being SDR easy to upgrade with software etc. You will need to budget for a decent computer and maybe an external sound card - but also an option to consider

Re: [Elecraft] Please recommend an HD monitor to use with P3SVGA

Hi Doug, The problem with recommending a model number is that within a year of purchasing a monitor it is usually superceded by a different model. I do have some suggestions that you might not have considered. Consider getting a monitor that can also serve as a second monitor for your PC. Most

[Elecraft] K3 dead

Help! I was using K3 as monitor when I measure signal path on my Drake R4C. Now K3 don't receive. Antenna tuner works, but without tuner big SWR. I think there was high voltage (abt 140V) on ANT2. What is the first place I must check? K3, KPA3 100W, KAT3 ATU, KBPF3... juha - oh6os -- View