[Elecraft] Batteryt Life

calculations) so it is best to only use these numbers as a guide and not to really expect to get that last hour or half hour out of the battery. I hope that this helps. - Dr. Megacycle KK6MC/5 __ James R. Duffey KK6MC/5 Cedar Crest NM 87008 DM65

[Elecraft] K1 enthusiast wonders ??

and this is not meant to denigrate them. I just am not one of them. - Dr. Megacycle KK6MC/5 __ James R. Duffey KK6MC/5 Cedar Crest NM 87008 DM65 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber

[Elecraft] Winding Toroids

, but thankfully they have evaporated. - Dr. Megacycle KK6MC/5 __ James R. Duffey KK6MC/5 Cedar Crest NM 87008 DM65 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr

[Elecraft] Antenna Analyzers

in the field to quickly verify that the antenna is operating OK. - Dr. Megacycle KK6MC/5 -- James R. Duffey KK6MC/5 Cedar Crest NM 87008 DM65 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

[Elecraft] Internal battery question

of float charging, which does not fully charge a Gel-Cell, or takes forever to do it. The use of a smart charger is recommended. There are some issues with using a smart charger, but they are covered in the technotes area of the Elecraaft site. - Dr. Megacycle KK6MC/ -- James R. Duffey KK6MC/5 Cedar

[Elecraft] Interesting Tuner applet

to indicate proper settings. I hope that this helps. - Dr. Megacycle KK6MC/5 -- James R. Duffey KK6MC/5 Cedar Crest NM 87008 DM65 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

[Elecraft] Low antennas in high places

looking for such locations and trying them out. If you have any further questions drop me an e-mail. - Duffey -- James R. Duffey KK6MC/5 Cedar Crest NM 87008 DM65 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post

[Elecraft] Antenna Question

Tom - You should use a 1:1 balun to feed the balanced line with the K2 tuner. You can easily make one by wrapping a dozen or so turns of RG-58 through a type 43 or 61 core FT140 or larger. Diz, at http://partsandkits.com/index.asp is a good source of these toroids. Alternately, you can slip a

[Elecraft] K1 and K2 Receiver Performance

/5 -- James R. Duffey KK6MC/5 Cedar Crest NM 87008 DM65 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo