Rose has a new e-mail provider / ISP that appears to
be free of the problems related to her old service, which
was often black-listed or blocked by other carriers.
Many messages, both to and from her, simply vanished.
If you've not had a response to an inquiry, please try again.
Lisa and Eric
to an inquiry, please try again.
Lisa and Eric at have updated the Elecraft site to reflect the new
contact information.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
David,
The 6M repeater offsets here in the US are either 1.0 or 1.6 MHZ. There are
exceptions, but not many. A duplexer for only a .5 MHZ frequency separation
would be difficult to build.
73!
Ken Kopp - K0PP
Montana VHF / UHF Frequency Coordinator
elecraftcov...@gmail.com
On Tue, Dec 14,
Ken and I wish for each of you a Happy Holiday Season.
88! de Rose - N7HKW
73! de Ken - K0PP
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Mark,
There are -no- stupid questions.
Push and Hold XFIL. You must be in CW mode.
73!
Ken Kopp - K0PP
elecraftcpv...@gmail.com
On Thu, Dec 30, 2010 at 7:48 PM, pastor...@verizon.net wrote:
I hate to ask a stupid question, but how does one activate the new APF that
is available with
An IRC Model 196 is an excellent solution. I have
them on my K2 and K3.
I think they're available from Array Solutions.
73!
Ken Kopp - K0PP
elecraftcov...@gmail.com
http://tinyurl.com/7lm3m5
__
Elecraft mailing list
The post should read ICE Model 196, not IRC ...
73! Ken Kopp - K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I think I recall a thread about spurs being produced by
a K3's TX, but didn't pay enough attention at the time.
I've since become aware of a K3 that appeared to have
two spurs showing up on my P3. They were about 30db
down from his very strong carrier on 7031 KHZ, and equally
spaced about 1
I'll second Don's endorsement of Dave, W8FGU's enclusures for Elecraft
Mini-Modules.
We show some of them at Rose's booth at west coast hamfests. I have
several, and they're nicely done.
73!
Ken - K0PP
elecraftcov...@gmail.com
http://tinyurl.com/7lm3m5
On Sat, Feb 12, 2011 at 5:36 PM, Don
Hi Tom,
The dimensions are essentially the same ...
We saw the first two at Visalia last year, and
will be making cases and covers for them.
73!
Rose - N7HKW
elecraftcov...@gmail.com
http://tinyurl.com/7lm3m5
__
Elecraft
sent with the pad
on the strap incorrectly, hence this posting to the reflector.
I apologize for the bandwidth.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Hi Julie,
As a repeater coordinator of 40+ years experience, I would say that
it's -highly- unlikely that the deviation of any your local repeaters are
exceeding +/- 5kHZ. This has been the commercial and amateur
standard for decades.
Trivia: Florida's first repeater (Tampa) was built in my
Been there, done that, as they say ... (;-)
If you still want to do it, I strongly suggest you copy all
the radio's parameters to a laptop so you can fix it on
the fly.
My K3 no longer goes to FD ...
73!
Ken -K0PP
On Fri, May 11, 2012 at 5:04 PM, Anthony Scandurra K4QE k...@att.netwrote:
Hi Mike,
It -may- be an ionospheric sounder. Most sweep (move) faster than this
one, but it still may be one. There are thousands of them in operation all
over the world.
73!
Kem Kopp - K0PP
elecraftcov...@gmail.com
On Sat, May 19, 2012 at 8:26 PM, Mike Weir ve3...@hotmail.com wrote:
Good
Many Hallicrafters rigs ... both Rx and Tx had tining knobs with spokes.
The SX-28 series comes to mind. Also the HT-4 ... aka BC-610's.
73!
Ken - K0PP
On Mon, May 28, 2012 at 1:54 AM, Ron D'Eau Claire r...@cobi.biz wrote:
Wasn't it Hammarlund who had some receivers with knobs like that,
Can one of you please provide me with the measurement
from the tabletop to the top of the tuner's cabinet?
If you happen to have the tuner combined with a K3, what
is the measurement from the tabletop to the top of the pair?
Thank you!
Rose - N7HKW
elecraftcov...@gmail.com
Mark,
I have the PR6 and it works very well. I would -not- consider
hanging it off the back of the K3 via M-M BNC's. Mine's
connected via two 6 BNC cables.
73!
Ken Kopp - K0PP
__
Elecraft mailing list
Home:
... matter.
Does anyone have a suggestion for better names for my
products that might help eliminate the confusion?
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
As another poster has suggested ...
The situation may relate to the type / impedance of the speakers being
driven by the K3. In my case ... where there's no apparent imbalance ...
I'm using a set of COMspkrs from West Mountain Radio ... fine units,
BTW, and totally free of RFI, even when setting
Does anyone have a feel for the time a package
sent via air mail to the UK from the US takes to get
through the two postal / customs systems and be
delivered?
I have one that was shipped on 03 October and
has not been received by my customer.
73!
Rose - N7HKW
elecratcov...@gmail.com
Hi Jay !
I suggest that you need to use ... borrow? ... some sort of an antenna
analyzer such as an MFJ-259B and find the points on each band where
the antenna -is- resonant. The resonant points on some bands will be
quite narrow (80M), but I'd think you can adjust the lengths of the dipoles
to
The last I knew, Kent keys were sold by AES ...
73!
K0PP
On Sat, Jan 5, 2013 at 1:58 PM, Nate Bargmann n...@n0nb.us wrote:
While probably not as easy to get on this side of the pond, I've been
very pleased with a set of Kent paddles I bought in the mid '90s:
http://www.kent-engineers.com/
I have two 4008 RIGrunner distribution boxes and numerous
PowerPole set-ups. Never had one disconnect on it's own.
73!
Ken - K0PP
On Thu, Jan 10, 2013 at 3:57 PM, N2TK, Tony tony@verizon.net wrote:
Actually I do like the Power-Pole connectors. Small, easy to use. The main
issue seems to
To anyone who know this man...
Would a set of my dust covers be of interest to him?
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
The PowerWerx red/back paired wire ---is--- together,
exactly like zip-cord and can be easily un-zipped.
73!
K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Hi Phil,
I'm a retired law enforcement radio tech. To answer your question, many
agencies that have multiple radio systems ... both simplex and repeater ...
do use GPS location to steer the frequency selection of their mobiles.
Some have all their repeaters on the same RF frequencies and use
box
or container to store your case in.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Olof, your e-mail address doesn't work for me. If you see this
posting, please contact me at elecraftcov...@gmail.com .
73!
Rose - N7HKW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I use my 2nd receiver to monitor the 6M band for
openings. It has a dedicated 6M antenna that's
permanently connected to the 2nd receiver's input.
73!
Ken Kopp - K0PP
__
Elecraft mailing list
Home:
Norton 360 has served me well ... without a single glitch ... for a number
of years.
73!
Ken - KOPP
On Fri, Nov 8, 2013 at 5:15 PM, Rick Bates happymooseph...@gmail.comwrote:
All the complaints about Norton and I've never had a false positive or
install failure because of it. I use it on a
-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rose
Sent: Friday, November 08, 2013 6:24 PM
To: Rick Bates
Cc: k...@arrl.net; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Spectrogram download site
Norton 360 has served me well ... without
Ken and I wish for each of you a HAPPY THANKSGIVING.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
a KXPA100 along with their KX3.
Thanks, and ...
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
OM Ken, K0PP and I want to wish each of you
a pleasant Christmas Day.
73 / 88 !
Ken (K0PP) and Rose (N7HKW)
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I too endorse the West Mountain speakers! I have them in use on my K2,
K3, KX3 and two commmputers.
73 !
Ken - K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Phil,
Google KE7X manuals - I think you'll find just what you're looking for.
73!
K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Maybe that explains why that out of almost 2K covers and cases sold there's
only been one
order from JA. (;-)
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
, embriodery, connector openings, etc.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
for the KPA500.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I'm about to have foam end caps made for carrying
the KPA500 amplifier in a DXpedition case, and I'd
like to have some idea of how many to order. They
will be identical to the K3 cases.
Do you expect to purchase one?
73!
Rose - N7HKW
elecraftcov...@gmail.com
by future
KPA500 purchasers.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
in English
and you translate and forward it to him.
Please contact me off the reflector if you'd be able to help.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
elects to do.
Thank you for your interest and suggestions.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
for Rose and she receives orders
from all over the world, so I've become reasonably
familiar with the procedure, but it's still a task.
The average transit time seems to be from two to as
much as four weeks. Israel is the exception. It can take
several months for a package to be delivered
For the first time in a number of years, Rose and
I won't be at Seapac. It's our favorite convention
and we have many friends there that we enjoy having
evening dinners with.
Last year's trip cost a bit over $700 and she sold
only one K3 cover, but the main reason to stay home
this year
There's a saying among VHF / UHF'ers in reference
to coax and connector losses that every .5db counts.
73! Ken - K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
It as written as tongue-in-cheek humor, Don. I trust most realized
that. ...
We all realize you devote LOTS of your (unpaid) time and effort to our
collective enjoyment and knowledge of Elecraft equuipment.
73!
Ken - K0PP
Cover is in color ... text and inside photos are B/W
73! Ken - K0PP
On Sat, Jun 25, 2011 at 8:28 AM, Bill W4ZV btipp...@alum.mit.edu wrote:
Bill W4ZV wrote:
Yes...B/W only.
Sorry...should have said the .pdf download is B/W only...don't know about
the printed version.
73, Bill
My K3 (SN 56) has the non-gold pins ... just checked them while in
the process of adding the LO stiffeners ... and they are unblemished.
It's had heavy contest use, too. Our Montana climate is dry ... this
may be a factor.
73! Ken K0PP k...@mailman.qth.net
Hello Elecrafters!
Ken and I send our best wishes to each
of you for the Christmas Holidays.
88/73!
Rose - N7HKW
Ken - K0PP
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
I hear it in SW Montana at 1305 ... about S7
73!
Ken K0PP
elecraftcov...@gmail.com
On Wed, Dec 28, 2011 at 11:41 AM, Jim McDonald j...@n7us.net wrote:
Peaking S7 on my K3 at 160 degrees from NW of Chicago at 1130Z. Cat (or
brick?) on a key?
73, Jim N7US
-Original Message-
John,
FWIW, my West Mountain Radio COMspkr set totally free of interference.
The unit with the amp is immediately beside a 1KW amp and the antenna
cables for several rigs pass within inches behind the unit(s).
73! de Ken Kopp - K0PP
__
Hi John,
Could the switch actually be a DPST and wired to -open- when the
switch is depressed? There are some musical (band) applications
where this would be the case.
73!
Ken - K0PP
On Mon, Jan 9, 2012 at 5:06 PM, John Shadle sha...@katzenfisch.com wrote:
Hi all,
I am finally getting the
Several have asked ...
Yes, the cover allows all cables to remain
connected when the dust cover is in place.
88/73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I've been thinking of asking this same question. I'd -really- like to have
an
amber background with black information display. (Like the Decca RADAR
I used to use.) (:-)
73!
Ken - K0PP
2012/1/16 Eduardo González edujo...@gmail.com
Hello friends.
My P3 is coming this week.
Is there
This subject has been discussed before. There are
apparently fans by different manufacturers used in
the K3.
I'm fortunate ... the fans in mine (S/N 0056) are not
audible, even during hours-long contesting events.
They are absolutely silent. Yes, they -do- run ... I've
seen 'em. (:-)
If could
Hi Ron,
I tried an LDG tuner operated remotely in an enclosure at the base of a
125'
tower with 120 radials. It was powered with a local 115VAC - 12VDCPS.
I had two failures, and even though LDG fixed the tuner under warranty,
I gave up and sold it. They couldn't ... or wouldn't ... tell me
I would certainly want my K3/0 to be in a normal-sized K3 enclosue.
73! Ken Kopp - K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
How about a permanent move of the Elecraft net
to 30M? That would END the issue of contest
week-end QRM ... to the net, at least ... and the
resultant carping on the reflector.
73! Ken Kopp - K0PP
__
Elecraft mailing list
Home:
Hi Ed,
Is the 25H a new addition to the Bird product line, or did you have
it custom made.?
73!
Ken Kopp - K0PP
elecraftcov...@gmail.com
On Tue, Mar 13, 2012 at 7:39 AM, Edward R. Cole kl...@acsalaska.net wrote:
I obtained a brand-new calibrated 25H element for my Bird43 power
meter, today.
one at Visalia, of course.
Stay tuned ...
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Google SeaSonde ... I used to work within a few hundred yards of
two of them ... one near Waldport, OR and one on Yaquina Head, OR.
Both are housed in the utility areas of public bathrooms. (;-) I have
numerous photos.
There are hundreds of ionospheric sounders scattered all over the
world. The
Phil,
The photo of Steve sitting on the ground near the pine trees was taken in
our
yard here in Montana. Steve and Maggie ... his Lady at the time ...
stayed
about week.
73!
Rose - N7HKW
elecraftcov...@gmail.com
On Wed, Apr 4, 2012 at 6:00 AM, Phil Genera p...@fivesevenfive.org wrote:
I had
Hi Bill,
Perhaps Don, W3FPR can be of help ...
73!
Ken Kopp - K0PP k...@mailman.qth.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
If you're an earthlink subscriber, please approve my
e-mail address BEFORE requesting information!
I will -not- deal with earthlink's absurd requirements.
Rose
elecraftov...@gmail.com
__
Elecraft mailing list
Home: http
Hi Bill,
Perhaps an ionospheriec sounder. There are thousands of them
in use around the world.
73!
Ken Kopp - K0PP
On Mon, Jan 14, 2013 at 3:40 PM, Bill Hammond wham...@aol.com wrote:
Anyone have any ideas as to what this is?
http://www.flickr.com/photos/ak5x/8380898512/in/photostream
I
Hi Merv,
I can't speak of CODAR operation specifically, BUT the Seasonde operation
by the University of Oregon does -not- operate in the amateur bands. Our RV
was parked within a hundred feet of the equipment for months at a time. My
IC-756PII on 20M -did- suffer a bit from overload by the 12
Julian's e-mail list has been hijacked !! He/she needs to learn how to
use BCC: so each of you won't be exposed to his carelessness.
K0PP
On Thu, Jan 17, 2013 at 2:38 PM, JULIAN BRADBERRY jhb...@att.net wrote:
Choose the freedom to work from home doing work you love
My fingers and toes are crossed as I write this, but ...
I've never been hacked ... to my knowledge... and never had
any form of virus problem. FWIW, I use Norton 360, and it's
configured to auto-update, and it alerts me often that it's blocked
an attack.
73!
Ken Kopp - K0PP
Music stores selling instruments usually have a variety of foot switches.
73!
Rose - N7HKW
On Wed, Mar 20, 2013 at 5:24 PM, Bob W7AVK ro...@accima.com wrote:
I've used a small door bell push button mounted next to the cw paddle or
key.
73 Bob W7AVK
On 3/20/2013 10:09 AM, Pete Smith
Boy, does that go -way- back! (:-))
K0PP
On Wed, Apr 3, 2013 at 7:04 PM, riese-k3...@juno.com wrote:
may be a coke bottle caught on a window blind waving in an open window
tipped on to a straight key ??
Bob K3DJC
On Wed, 3 Apr 2013 10:00:07 -0700 (PDT) Dave KK7SS kk...@frontier.com
Does anyone have a Begali Classic/Profssional that
they can take measurements from? The Begali website
has no dimensions.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Fred's KX3 book is also the correct size to fit into
either the front or back pockets in my KX3 carying
case.
His K3 book also fits into the front or back pockets
of my K3 carrying case.
73! Rose - N7HKW
elecraftcov...@gmail.com
http;//tinyurl.com/7lm3m5
I'm guilty of not paying much attention to reflector
chatter concerning batteries, as I didn't expect to
need any. (:-)
Now I have a new KX3 (S/N 4437) and find I need
a set to keep the clock running when it's off 12V.
Who's a good source?
73!
Ken - K0PP
kengk...@gmail.com
Wayne, you spin a nice yarn. Enjoyed the read. (:-))
73! Ken Kopp - K0PP
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Most sheet metal shops can sheer copper sheets into almost any width one
would want, and the cost is reasonable. I had about half of a 4 x 8 sheet
sut into 1 and 2 inch x 4 foot strips several years ago and that's used
throughout my station's grounding system.
.
Ignore the Rose header ... I'm using her computer for this
reply.
73! Ken - K0PP
elecraftcov...@gmail.com
Here's my question: What are the two spikes that I see about 500 Hz to
each side of 28.130, approximately 25-30 dB down from the center's peak
level (-125 to -130 dB)? These spikes
an opening in the cover for them.
We'll address a potential padded case next. It's a complex
issue, with many concepts of what extras might be added
over and above the KX3.
Stay tuned, and
73!
Rose - N7HKW
elecraftcov...@gmail.com
Yeah, sometimes we're like trying to herd cats ... and keep 'em quiet. (:-)
73! Ken - K0PP
On Wed, Dec 7, 2011 at 10:04 PM, Eric Swartz - WA6HHQ, Elecraft
e...@elecraft.com wrote:
And now its time to close this thread and move back to our regular mayhem..
73,
Eric
List Moderator
I have no interest at all ...
73!
K0PP
On Fri, Jan 31, 2014 at 12:50 PM, Robert Garceau rgarc...@snet.net wrote:
No
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of KE8G
Sent: Friday, January 31, 2014 12:20 PM
To:
Mark,
Messages to you are bouncing ...
Do you have an alternate e-mail address?
73!
Rose -N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Hi Mike !
What would make it more rock solid in your view?
What about the radio and / or production firmware isn't?
73!
Ken Kopp - K0PP
On Mon, Feb 10, 2014 at 11:20 AM, mikerodgerske5...@yahoo.com wrote:
Ken,
Yes,I have a Elecraft radio thank you very much.
I misspoke about the display
An excellent, well-reasoned discussion.
73
Ken Kopp - K0PP
On Mar 9, 2014 10:23 PM, maxwel...@aol.com wrote:
Hey Rich,
Problems like these can be very frustrating. Not lecturing to you, but
take a deep breath. You will get it going. I know the tendency is to
throw the baby out with the
to use as a
manikin, and will be working on a way to include it in my KX3 cases.
If you're concerned about your order don't hesitate to ask. My cell # is
406-560-3738. BTW, all orders are filed by date received.
88 !
Rose - N7HKW
elecraftcov...@gmail.com
On Apr 18, 2014 12:19 PM, Rose elecraftcov...@gmail.com wrote:
On Apr 18, 2014 12:17 PM, Rose elecraftcov...@gmail.com wrote:
Some of you are aware that l've been dealing with medical issues for
several weeks. I'm back home from the hospital and slowly getting back to
work. (:-)
I
worst he's seen.
There are others with orders waiting and I'm taking the liberty of using
this reply to inform all about what's going on with Rose's Covers Cases.
ALL will hear from me just as soon as possible, and thank you for your
patience!
73
Rose - N7HKW
elecraftcov...@gmail.com
On Apr 25
Hi Denny!
Mail to your address bounces ... says quota exceeded.
73!
Rose - N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
How about heat dissipation if the intent is to operate the radio in the box
and encased in foam?
73
Ken - K0PP
On Jun 6, 2014 5:50 AM, Jeff Herr her...@comcast.net wrote:
Saw this on http://www.amateurradio.com/
http://www.oe2atn.at/tom/gobox/
, don't hesitate to inquire. Ken
will be helping
with the order tracking and correspondence.
If you don't wish to wait for me to fill your order, feel free to
cancel. FWIW, I -don't-
plan to quit my little business, but if you want to cancel your order, I
will certainly
understand.
73! Rose - N7HKW
Hi Andy,
Don, W3FPR comes to mind. He enjoys a first-class reputation. You can
find his email address in one of his postings here on the reflector.
73
Ken - K0PP
On Nov 7, 2014 8:55 AM, Andy (KU7T) k...@ku7t.org wrote:
Hi,
I like my K2 (I have a K3 too), but have a few things I would
Every room here has a 60 kHZ-synched WWVB clock. Have never looked at ...
or set ... the clocks in my K3 or KX3. Or the K2 if it has one. We have
an actual clock radio in the bedroom. (;-)
Trivia: The 60 kHZ xmtr NE of Fort Collins is a retired 100 kHZ LORAN C
xmtr from ND.
The last time I
I lock the main tuning (VFO A) on the DX ... prevents uh-ohs. I then rest
my left fingers on the top front edge of the K3 and hold the REV button
with my left index finger as needed while tuning the main VFO with my right
hand.
It's pretty easy to find the station the DX is working and releasing
Chris,
Are you confident the PP''s are correctly assembled? When you inserted
them into the body did they snap or click into place? If so, it should
be impossible to pull the wire/brass connector out of the plastic body.
73
Ken - K0PP
On Feb 17, 2015 7:58 AM, Chris Hallinan
Hi Dave!
No WA6OCT listed on QRZ.com ... FWIW.
Ed has several of Rose's cases that fasten together, back-to-back ... the
first of many she's made. It was his idea.
She's mending after her chemotherapy and radiation treatments and expects
to be able to
get up the stairs to her sewing room soon.
Excallent point Dave. I apologize for my regional thinking ( :-)
73 - Ken
On Feb 15, 2015 11:55 AM, David Pratt da...@g4dmp.fsnet.co.uk wrote:
That would be no good to me, Ken, WWVB is not receivable in Great
Britain. We would need MSF on 60 kHz. Remember that the KX3 K3 are
global
After 64 years in the hobby I still don't understand where this
idea that hams are cheap comes from! I simply don't accept
this urban legend.
Jim is certainly correct about the funds changing hands at Visalia.
My Lady ... Rose of elecraftcov...@gmail.com ... hasn't been
able to make the trip
The question has already been answered and K3S is now programmed into the
embroidery software. (:-)
Thanks!
Rose - N7HKW elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Have noted some confusion on the reflector
Should I use an upper or lower case S when embroidering items for the
new K3s / K3S ?
73
Rose - N7HKW elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Henry...
The poster is/was looking for a site where a group was going to hold FD,
-not- a place to hold a FD event.
73!
Ken - K0PP
On Tue, May 26, 2015 at 11:16 AM, Henry Pollock - K4TMC kilo4...@gmail.com
wrote:
Ian,
One potential site may be the Congaree National Park. It is just south
Do any of you new K3s owners have one of my
DXpedition K3 cases with the foam end cap kit?
If so, do the end caps fit the K3s OK? I don't think
there are any differences that would impact the fit
of the front or back end caps, but I'd like to conform
this.
Thank you, and ...
73!
Rose - N7HKW
1 - 100 of 233 matches
Mail list logo