After 2+ years of operation K-3 SN31 has just succumbed to a compound failure
of the smaller Main control AF and RF knobs.
I thought I was pretty lucky when I first saw list notes about the knobs
failing and figured maybe a bad batch, etc. The rig SN 31 was originally placed
in service in late
Item 08023 - starting bid $2500 - Goes on auction at 10AM ET Thursday 10/22/09.
Just a few hours away.
http://arrl.auctionanything.com/AuctionHelp.taf?S=nkeyword=return=50R=C=sort=1DA=st=1Category_ID=Donor_ID=su=status=skipkw=1_start=101days=10PD=CD=hr=bo=lo=hi=loc=at=P=Ltype=event_id=
73
In a message dated 12/5/2008 9:05:02 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
I'm running the K3 with an Ameritron AL800 and a Steppir 3 element
with 40m dipole add-on. I have a severe though intermittent feedback
problem on 40m that I did not have with an Icom 751a. The
In a message dated 10/8/2008 11:03:32 A.M. Pacific Daylight Time,
[EMAIL PROTECTED] writes:
Hi all,
Is there any problem using a VOM instead of a DMM to perform the resistance
checks while building the K3? I have yet to make it fully into the modern era
and to that end, do not have a DMM.
One of the main reasons touted by Elecraft for many years is the low phase
noise presented on the K2.
Some of the things that contribute to unacceptable phase noise levels can be
attributed to incorrect alignment of circuits during build, inadequate
shielding of CAT cables and bus
Congratulations on your accomplishment. Last spring a group of students in my
electronics class undertook the challenge of building a K2 (SN6281) It is now
part of ARS KI6PRK at Dos Pueblos high school in Goleta CA. It was completed
just before school let out for the summer and the new classes
Sounds like solderless kit building has arrived!!
(Here's the story about the Eskimo fisherman I met while on a canoe trip to
the Arctic. He lived in Tuktoyaktuk, of Ice Road Truckers fame, only this
was 1965. He had built a Heathkit 'Fish Finder' kit and had a little trouble
with it; he
This site is the manufacturer of the Ferrite materials They are responsible
for a major percentage of the material used by the ferrite core
manufacturers and retailers. There are several tutorials on a variety of
lists that
break down the relation-ship between Fair-Rite and the 2nd party
In a message dated 8/30/2008 6:09:10 A.M. Pacific Daylight Time,
[EMAIL PROTECTED] writes:
I've been a subscriber to this list since the day I ordered the K3 back in
March 2008. The factory assembled and tested radio is due to arrive next
week.
I'd like to hear about any issues previously
Aside from the fact that many unused kits sell for almost the price of a new
one, there is a certain value in having the warranty (one year) of a new
kit in addition to the guarantee of success that is attached to it. You are
also assured of the latest version firmware and current state of
I have many e-mail accounts and use a variety of e-mail softwares. One of
the features of many of them sets the maximum size of e-mails that it will
receive. Eudora is one that has that feature. Check your e-mail software
settings
or preferences/options for setting size of e-mails it'll
It sounds like you may have a spurious oscillation problem inside the box. A
spur can drain a high level of power, be off frequency, destroy finals, etc.
The power on one band and none on the other sounds like you may have a
component misplaced or wrong value - including the tuning of the
Check the Elecraft web page for upgrades that either rig might be lacking in
support of the KPA. Also make sure your Firmwares are up-to-date. I would
recommend doing a reset on the older rig after install hardware and prior to
configuring setup. You may want to check your filter configs and
Although the KPA is installed and is responding to setup configs, there is
one area that is sometimes overlooked. The internal RF connection to the Main
board needs to be connected correctly, and the antenna needs to go to the KPA
SO239, not the Mainboard BNC.
Al WA6VNN
+++
If you guys are excited, you can only imagine how some of us who have
hardware on board feel!!
Al WA6VNN
**Get trade secrets for amazing burgers. Watch Cooking with
Tyler Florence on AOL Food.
(http://food.aol.com/tyler-florence?video=4?NCID=aolfod000302)
Here is an rather old post with serious implications for amateurs.This could
mean major revisions in the way manufacturers display frequency. It may also
lead to serious complications with the design precision of many rigs and other
electronics devices.
Jon,
I haven't read all the replies on this list, it's getting late here in
California, so I hope I'm not being repetitious. From what I read it sounds
like you
are having a rather normal experience.
I don't know how old you are, so I can't tell if this will be very helpful.
Usually I can
My SN31 doesn't exhibit a noticeable difference between inner surface finish
and outer surface finish.
It is conceivable that a metal working shop might assume the surface with
the flush screws faced the exterior for appearance sake, rather than the
engineered aspects.
Al WA6VNN
I'm pleased to announce that the construction of K2 SN 6281 has been
successfully completed by the students of the Dos Pueblos Amateur Radio Club (
Dos
Pueblos High School, Goleta, CA) with the new Call Sign of KI6PRK, and is now
on the air. The newly completed rig is a K2/10 with KAT2,
No problem here Wayne, I remember when a mod required a hot soldering Iron
to undo. And in case any of the younger crowd here thinks this wasn't a big
deal should have owned the hotest rig for 1978, the Yaesu FT901DM. It kept a
monthly newsletter full of mods (Fox Tango Club, before
Bob,
I don't think your concerns are warranted. The LCD is an array of transistor
switches which affect the transmission of light by polarizing effects of
their electrostatic field. The actual light is provided by backlighting from
light emitting diodes which are well known for their
H! It seems to me that would put Icom/Yaesu/Kenwood and many other Ham
radio Rigs in a not in the spirit of ham radio category. As I recall every
one that I ever bought was first sold to someone before they marked it up and
sold it to me. At least that's what the AES, HRO and Jun's sales
Is the Country configuration of the K3 an issue?
Al WA6VNN
**Need a new ride? Check out the largest site for U.S. used car
listings at AOL Autos.
(http://autos.aol.com/used?NCID=aolcmp0030002851)
___
Elecraft mailing list
Post
Another low voltage power source that is in common use is the lead-acid
storage battery used on cars and especially the deep cycle marine battery
favored by hams for backup. Usually a ring or watchband is not a problem
because
of the terminal spacing at the battery, but the danger is very
Tin Whiskers has primarily been a problem inside hermetic seals where there
is little or no atmosphere and in weightless environments. Satellite and space
probe instrument makers are the most concerned (Hence NASAs involvement).
Has anyone heard of the tin whisker as a problem in automotive
Scott,
I just installed L33 in a K2 last night. The wire should not require
stripping in any manner. Be careful and don't flex it too much it is very
fragile.
Follow the procedure in the assembly manual closely. The hardest part is after
the coil is in place on the rubber spacer, and the
I had similar problem during the build of my 2nd K2. I had the experience
during the First test stage - very few parts on RF Board. Consequently I
re-soldered many pads on the FP and Cont boards, to no avail.
I discovered that I could press DISPLAY button and Menu button and get
mainly
It's not that 3ms is a lot of time in terms of human scale. But, it is the
rise time of an electronic pulse. This can have a lot of impact on the
transient waveform that results in an audio demodulator - i.e. receiver. The
difference is noticeable enough to make the difference in a crowded
Maybe you are not using the Broadcast band on your K3, but if you ever
install the BPF3 and AM filters to use BCB receive, you may find the 5 MHz
band to
be an excellent place to do your listening.
Al WA6VNN
In a message dated 3/22/2008 5:54:55 P.M. Pacific Daylight Time,
[EMAIL
One of the courses I teach is Computer Repair and Service. My students
recycle about 200 donated computers (PCs) per semester. They are redistributed
to
needy families locally. We have just migrated to Windows XP on the newer
donations with fast processors and larger ( 256MB)
But, for
Having lived in Santa Barbara most of my life I have had the privilege of
friendship with many of the staff of the original EiMac Vacuum Tube company.
One
of the last of their original Tech staff, Rad Leonard, Just passed on a few
months ago. In the course of these acquaintances I was privy
Whoa! Is this deja vu (all over again). Maybe you missed the exchange
between me and Gary a couple days ago over the same question.
I suspected I was having the identical problem you are having because of
some of the random button pushing that took place during the assembly of K2 sn
I am at the first power on test stage of K2 # 6281 and have anomalous
readings. Should be INFO 250 or 7100.0 c
What I get is ELECrAFT followed a few seconds later by 0 ? 50.0 c (or
u,r,etc)
Turning VFO dial does not change frequencies as expected but changes to 1 5
15.1 and other
After my prior post:
In a message dated 3/14/2008 11:15:55 P.M. Pacific Daylight Time,
[EMAIL PROTECTED] writes:
I am at the first power on test stage of K2 # 6281 and have anomalous
readings. Should be INFO 250 or 7100.0 c
What I get is ELECrAFT followed a few seconds later by 0 ?
In a message dated 3/3/2008 12:28:35 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
The finger tabs on this keyer are they held by rivets or screws? On my
other Bencher the finger tabs are held by rivets and the dit paddle is
getting loose which is a bit annoying. Anyone have any
In a message dated 2/27/2008 9:54:12 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Well, I've convinced myself that the Radio Shack portable ESD mat, P/N
276-2370 doesn't work properly.
The ESD Association http://www.esda.org has promulgated an
industry-standard test for ESD mats,
In a message dated 2/27/2008 2:32:05 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
I would point out that in order to work DXpeditions such as VP6DX
on CW, realistically, all that is required is the ability to recognize your
own call.
Your report will be 5NN or, perhaps 599. Your
In a message dated 2/27/2008 5:19:21 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
David Ferrington, M0XDF wrote:
I managed on 80m SSB at 07:25z the other day. Ok is was 120w, but I got a
good 59, so I think 10 might have made it.
I tried, for an hour. There was simply no chance
In a message dated 2/21/2008 3:57:57 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Anyone else have this???
My toast has been coming out burned on one side ONLY
AFTER the MCU 1.69 update.
Before the update my toast always came out perfect. I
have never unplugged nor moved my
In a message dated 2/19/2008 3:17:50 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
From my posting from last week:
- Ordered (with 50% deposit) 6 June 2007 with subsequent modifications.
- Received and responded to Lisagram late Tuesday, 12 Feb 2008.
- Called by Madeline for final
In a message dated 2/17/2008 8:20:51 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
- Original Message -
From: Ron D'Eau Claire [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, February 17, 2008 8:44 PM
Subject: RE: [Elecraft] My Lisagram arrived!
As a native
In a message dated 2/17/2008 3:45:27 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
All of a sudden, I'm getting a strange icon on every band change. It
appears momentarily only. Looks like an antenna symbol with a bar across
the top.
Has anyone any idea what this icon represents,
In a message dated 2/11/2008 8:35:24 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Roger, I have been lobbying from the sidelines that
when the (not yet available) FM filter is ready that
it should be usable for AM and FM reception both,
because 5 khz is not enough IMO. SSB reception
In a message dated 1/23/2008 7:11:35 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Are ssb tx passband adjustments in the K3 limited to TX EQ? If so, is
there
a spec on what the tx audio passband is adjusted to at the factory with the
stock 2.7Khz filter?
The default Tx Audio
In a message dated 1/23/2008 3:49:18 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Is the list being actively filtered? The endless stream of griping,
carping, whining emails seems to have stopped (thank goodness).
MikeW5FTD
__
A
In a message dated 1/20/2008 10:07:21 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
The build of K2 #6358 has hit a road block!
I have a couple of questions concerning the backlight/diffuser:
1. The leads are too short. About a week ago Gerard, PA3GP, proposed
extending the leads
In a message dated 1/12/2008 3:40:37 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Hi All
just built my K3 up to the 10 watt level (still to fit the 100w pa) have
been giving it a quick test and have a question, i have fitted the AM filter
in
FL2 (The FM will go in FL1) and the
In a message dated 1/6/2008 6:21:57 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
I have a MH2, and going back and reviewing the SSB passband and filter
alignment helped me quite a bit. It sounds fine, though I heard through
another on the list that they had success with their Proset
In a message dated 1/7/2008 3:23:00 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Can someone tell me what the cabinet color of the K3 is? I at first
thought it was a brown color, then I thought I saw someone remark that is
had been changed to black. Now I see remarks about using a
In a message dated 12/31/2007 8:49:19 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Folks,
After a 2+ year hiatus from RadioActivity, I finished up a K2 build,
and tried getting on the air a bit--UGH dismal results! During the
recent ARCI Homebrew Sprint I made 3 contacts, 1 in WA
In a message dated 12/30/2007 3:42:03 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Gentlemen:
I noticed that several of the other highly computerized radios on the market
have a substantial time delay after power on before the radio is fully
operational (IC756Pro, IC7800, etc.).
In a message dated 12/31/2007 9:46:26 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
In a message dated 12/30/2007 3:42:03 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Gentlemen:
I noticed that several of the other highly computerized radios on the
market
have a
In a message dated 12/29/2007 10:04:34 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
I placed an order for a K3/100 yesterday. It looks like an April/May
delivery, but given all I have heard from this group it will be well
worth the wait. Now to sell my OMNI VI+.
Dennis, K7FL
Battle
In a message dated 12/29/2007 1:58:22 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
My Baptism of Fire was with MD4K on the IOM in CQWW MM .
Thirty seconds after the contest started I was in shock..Five
other operators, all in the same small room shouting their heads
off.
In a message dated 12/29/2007 6:19:25 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
The damn bail stand is too high !!!
I've noticed it's a little on the high side for folks with smaller hands
than I. Aside from that, the viewing angle is ideal, which can
In a message dated 12/29/2007 4:51:25 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
- Original Message -
From: Tom Childers, N5GE [EMAIL PROTECTED]
To: Elecraft List elecraft@mailman.qth.net
Sent: Saturday, December 29, 2007 12:15 AM
Subject: Re: [Elecraft] Which Heil
In a message dated 12/29/2007 3:01:31 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Good evening, morning, day or night,
That's why air traffic controllers, emergency service dispatchers and many
others are carefully taught to *never* raise their voices on the air. They
need to be
In a message dated 12/28/2007 10:07:02 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Elecraft needs a desk microphone in it's product line.
The stiff cord on the MH-2 is capable of dragging the
radio around the desk before it yields. It's very stiff.
I have a Heil Goldline
In a message dated 12/26/2007 7:37:49 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
I'm back from my week-long road trip, and I finally have pictures from
my trip online, plus the pictures from my K2 build...
http://www.flickr.com/photos/af6fh/collections/
(Note: If you're offended
In a message dated 12/18/2007 1:18:15 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
...then you haven't seen this
_http://www.amazon.co.uk/Bic-Crystal-ballpoint-medium-point/dp/customer-review
s/B000JTOYLS/_
Never had this happen with a Yaesu - never had the opportunity! Is there a
value that can be placed on choice? I'm glad Elecraft gave me a choice.
Al WA6VNN
K3 #31
K2 #4887
K2 #6281
**See AOL's top rated recipes
In a message dated 12/11/2007 11:40:11 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
You don't suppose trying to use an 80-meter dipole on 160 had anything to do
with it, do you?
K9ZTV
[EMAIL PROTECTED] wrote:
I don't know if this will help, but I've had two experiences with my
I don't know if this will help, but I've had two experiences with my K3
regarding power reduction. While attempting to participate in the 160M contest,
I
connected to my 80M dipole and hit tune in the ATU active mode. I immediately
got a high SWR and retune cycle which reduced the SWR at the
Also look in Table on Pg 49 Main Menu Table under MIC SEL for the specific
settings.
Al WA6VNN
**Check out AOL's list of 2007's hottest
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop000301)
It may also be helpful to mention that using the correct size philips head
is very important in maintaining the appearance of the rig. It's worth the rip
to the tool store with a screw in your pocket to get a new driver with a
large enough tip to fit snuggly. There is such a wide variety of
In a message dated 12/8/2007 5:11:35 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
For those with a K3 in the shack, HRD is now available. There will be a lot
more support as Wayne adds CAT-related features.
Folder: http://www.ham-radio.ch/kits/beta/3.5/1686/
Kit:
In a message dated 12/8/2007 3:53:16 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Anybody else having a go at the 10 meter contest? Conditions pretty bleak
here in Colorado - much worse than last year.
So far I have 21 Texas QSOs, 21 local Colorado, 16 other assorted stateside
and
I performed the upgrade V1.45 and have noticed nothing unusual. Check the
CONFIG to make sure all your options are still ON, just in case something got
bumped. My filters are set up starting with FL1, FL2, FL3 - nothing skipped.
Nothing in the FL4 or FL5 slots (yet)
I always make it a
In a message dated 12/4/2007 11:19:16 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Hallo
I see that the K3 receiver is spec'd down to 500 kHz. What about below
that? Is it completely dead (e.g. due to filtering), or is it alive but with
reduced sensitivity, selection, etc.?
K3 CW for me has been smmoth as silk, and I have a sensitive ear. Only
deviation I've seen is when I run the DSP filter at 50 Hs there is somewhat of
a
rolling off of the higher frequency components of the tone. But, there is also
an improved performance of the CMP with the reduction in noise
Thanks for the contact on 40M. Great Signal!
pse QSL ; )
Al WA6VNN K3 sn0031
**Check out AOL's list of 2007's hottest
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop000301)
___
In a message dated 12/3/2007 2:04:14 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
I have been looking at the reflector from time to time,
and was shocked to read that the 100 plus K3's that have shipped
do not have many options they were supposed to have, like
AM mode, FM mode, AM
I believe the 5 pole filters are made in house at Elecraft and the 8pole
filters are sourced to Inrad.
Here's a question -
I have a perfectly good Yaesu FT990 and have always wanted a narrow CW
filter for its 2nd IF ( The first IF has a roofing filter of sorts). Anything
between 100Hz and
Just to add another slant to the slippery hill, I have a perfectly good IPaq
5400 that is a very small computer and has huge storage capacity. It is
hardly used because it lacks a lot of common interfacing. It does Blue tooth,
WiFi and IR but no USB or RS232 (as if having a laptop weren't
I hope this helps answer some of the questions about the K3 and support for
mics.
First the Heil mics:
It will support the Elecraft (Heil) Proset K2 and the Heil Proset HC-4 and
HC-5.
The HC-4 and HC-5 are very similar, differing mainly in frequency response.
They are both unamplified
In a message dated 11/27/2007 10:14:01 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Thanks Thomas. Gary set me straight on that one too. I guess it is
easy to accidentally change some settings without realizing it.
Doug -- K0DXV
K3/100 #77
OK, time to be brutally frank about the
I have 2 Heil Prosets, the Elecraft version and the ICOM/Yaesu /5 version.
Later today I'll check them side by side for comparison on the K3. I can make
both work equally well on the K-2 using the UN-PCB Universal Mic Interface to
switch the bias in or out.
I use the Heil/Elecraft Proset
Item 3) - The VFO B Should have 2 felt washers to adjust drag. See Assembly
Manual any REV. Even if the washers are in place the knob may need to be
adjusted closer to faceplate to increase drag.
Al WA6VNN
**Check out AOL's list of 2007's hottest
Hi everyone -
One main reason I got a K3 was to be more active in DX and Contesting, now
that I'm semi-retired. I used to be a very active contester in the late 70s
early 80s and stayed in it mostly as a club activity since. I was introduced to
logging software with CT in it's early days
In a message dated 11/24/2007 5:12:21 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Brett announced: I have decided to cancel my order
for the K3, I think I will wait snip
OUCH! I wonder if it's already shipped.
I remember about 30 years ago
In a message dated 11/24/2007 11:40:37 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
The quiet receiver is *very* pronounced when using data modes. I am so glad
I sold my IC-7800 - this K3 is tons better.
Listening to the CW contest with 250Hz and 1kHz filters is a pure pleasure,
I
In a message dated 11/23/2007 12:13:55 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
No problem Gary and I'm glad we agree on that :-)
Sorry if I didn't make that clear. To try to clarify this.. the basic
premise is that anything you attach to you or your kit, while you are
building,
In a message dated 11/21/2007 11:05:45 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Hi all, especially those who have assembled a K3 already (Eric, Wayne,
and the Elecraft FTers invited to answer as well):
Okay...so here I am in the K3 queue, getting ready. I have picked up
an ESD
Happy Thanksgiving to All
And especially to the entire Crew at Elecraft, you deserve a rest!
73, AL WA6VNN
**Check out AOL's list of 2007's hottest
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop000301)
Robert, From the description of the tools you have been using I wouldn't
even guess you are a beginner at soldering. You've made all the right choices
and have spent some time learning the vast range of devices that will confront
you. The .05 chisel tip is a good choice, especially for the
In a message dated 11/19/2007 11:20:14 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Ed, I'm waiting for my K3 and I'm a phone man at present (working on my
Morse).
I have a 2.8kHz and 400Hz on order. Reading your post, maybe I should
consider either a 1.8 or a 2.1 kHz filter too.
In a message dated 11/17/2007 7:29:19 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Wonder which call letters I should be keeping an ear out for in
Sweepstakes...
If your K3 will be active, please let us know...
Thanks!
John K7FD
___
In a message dated 11/16/2007 2:24:00 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
On Nov 16, 2007 9:38 PM, [EMAIL PROTECTED] wrote:
As long as I get my K3 sometime before the sunspots get back, I'll be
happy...
I sincerely hope I don't have to wait *that* long! :)
--
Julian,
In a message dated 11/16/2007 2:46:00 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
As others noted you can have up to 5 roofing (crystal) filters in the main
receiver. I don't recall seeing a number for the Aux receiver.
I don't know of any conflicting configuration options like
The first thing I'd do is send an e-mail to [EMAIL PROTECTED]
(mailto:[EMAIL PROTECTED]) . My unqualiifed guess is a firmware version change
or patch for that country. Which leads to the possibility that is already
installed. TECH MD in the CONFIG mode allopws setting of country. I have not
And then there's the frogs! The ant tuner will shut them all up for a few
minutes!
Of course, there is always the possibility of using a feedline that is
matched to the antenna and good grounds etc. I've been runnning a vertical made
by
Mosely back in the late 1950's, with 80 feet of RG-8.
In a message dated 11/14/2007 3:25:19 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Craig D. Smith wrote:
When you tap XFIL to rotate through the filters the discrete FLn
indicator lights up for that filter and also the VFO B display says
FL3 0.40,
FL4 0.25, etc. So you don't
In a message dated 11/14/2007 3:25:19 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Craig D. Smith wrote:
When you tap XFIL to rotate through the filters the discrete FLn
indicator lights up for that filter and also the VFO B display says
FL3 0.40,
FL4 0.25, etc. So you don't
If you haveever tried to remove housepaint from a coax, black or whatever,
you'll know that best way to match the coax to the house is to paint it with
your color of choice. I have a 45 year old Moseley vertical ant that I paint
with latex exterior paint and it lasts until you take it off.
SN31 was placed in full operation at 0900Z 12 Nov 2007.
Primary mode of operation CW on 40 a little 20 as bands improve and some 80M
SSB for net time.
73 Al WA6VNN
** See what's new at http://www.aol.com
I'm confused, the KBPF3 is a fairly large board that mounts on the RF board
and operates in bypass to the ham band only BPF. Has anyone seen the KRX3
schematic or an image that tells the full story?
Al WA6VNN
In a message dated 11/10/2007 3:23:21 P.M. Pacific Standard Time,
[EMAIL
I was a little concerned after installation of the Noise blanker board
as it did not sit level to the RF board.
I thought that the standoff I had installed was a little short.
Measuring it, it was correct as per the manual. . .
I added a third split ring washer to the assembly sotherre are
I agree what you said for a $300 million? business. I have been in management
of projects that have a 5 year budget in that area. But Elecraft is far from
that. I see many plusses from announcing the product when they did. Add in a
little enthusiatic optimism coupled with the knowledge they
That's been my rant for at least 5 months now.
73 de WA6VNN sn31 and ready for your next prod.
-Original Message-
From: Simon Brown [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tue, 6 Nov 2007 9:31 am
Subject: Re: [Elecraft_K3] K3 Product Launch
I'm taking a lot out of
In a message dated 11/5/2007 12:29:53 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
A minor correction to your minor correction.
My statement was that Elecraft AS A COMPANY is inexperienced dealing
with contractors.
It's clear from what's happened with the K3 that even if an
1 - 100 of 177 matches
Mail list logo