Re: [Elecraft] Problem Tuning K3-" Balun"

[Joe Moffatt]

U

Get Outlook for iOS

From: elecraft-boun...@mailman.qth.net  on 
behalf of Ray 
Sent: Tuesday, November 2, 2021 10:00:06 AM
To: bw39...@yahoo.com ; elecraft@mailman.qth.net 

Subject: Re: [Elecraft] Problem Tuning K3-" Balun"

I agree…. Feedline’s Best Friend !
WA6VAB Ray K3


From: Bill via Elecraft
Sent: Tuesday, November 2, 2021 6:15 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Problem Tuning K3

Jim,
I assume your using a balun with your
OFC antenna. I had a similar problem with my OCF that turned out to be the 
balun.  It was fine under low power but would not tune under high power.

Thanks,
Bill - W0BBI
__
Elecraft mailing list
Home: 
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraftdata=04%7C01%7C%7C23d27e0d33b1412f4e4b08d99e119622%7Cacac7506b78d4bb49caa210be3a8951e%7C0%7C0%7C637714620631786019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=BpK6NwlWmpuGSxPXnrbv%2ByVNJD6CWJTB4rCvYuWnOmg%3Dreserved=0
Help: 
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htmdata=04%7C01%7C%7C23d27e0d33b1412f4e4b08d99e119622%7Cacac7506b78d4bb49caa210be3a8951e%7C0%7C0%7C637714620631786019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=khm51b329ULrby9NEZ4gIcuFvb87LYo2jzEvr3ZExYM%3Dreserved=0
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: 
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdata=04%7C01%7C%7C23d27e0d33b1412f4e4b08d99e119622%7Cacac7506b78d4bb49caa210be3a8951e%7C0%7C0%7C637714620631786019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=z4V%2Bst2LC1Z8xWzGMDYZXFFJijp5Y9qCKATbveTqipo%3Dreserved=0
Please help support this email list: 
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.htmldata=04%7C01%7C%7C23d27e0d33b1412f4e4b08d99e119622%7Cacac7506b78d4bb49caa210be3a8951e%7C0%7C0%7C637714620631786019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=8bQ2%2BlnRv%2F9muZmlrrF628s9%2FKyPTBmYZVM8GoyKP68%3Dreserved=0
Message delivered to wa6...@gmail.com

__
Elecraft mailing list
Home: 
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraftdata=04%7C01%7C%7C23d27e0d33b1412f4e4b08d99e119622%7Cacac7506b78d4bb49caa210be3a8951e%7C0%7C0%7C637714620631786019%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=BpK6NwlWmpuGSxPXnrbv%2ByVNJD6CWJTB4rCvYuWnOmg%3Dreserved=0
Help: 
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htmdata=04%7C01%7C%7C23d27e0d33b1412f4e4b08d99e119622%7Cacac7506b78d4bb49caa210be3a8951e%7C0%7C0%7C637714620631795976%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=BxccOpaIiR97tPLc5ujFFRCkjgo69JzHS8rpl%2B3MwXM%3Dreserved=0
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: 
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdata=04%7C01%7C%7C23d27e0d33b1412f4e4b08d99e119622%7Cacac7506b78d4bb49caa210be3a8951e%7C0%7C0%7C637714620631795976%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=HMABokYpjsnCFq5DCaqZg4eq%2FWwMMJNi0MqVWlAnjmc%3Dreserved=0
Please help support this email list: 
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.htmldata=04%7C01%7C%7C23d27e0d33b1412f4e4b08d99e119622%7Cacac7506b78d4bb49caa210be3a8951e%7C0%7C0%7C637714620631795976%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=H5jHXEa7o01ZBZKgVFtkNbb4Di656Y%2F2ckpu6Db65YI%3Dreserved=0
Message delivered to j...@selectconnect.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] SOTA Acceptance

[Joe Moffatt]

Speaking of crappie poles what pole do you use?

And I agree with everything you said.  EVERYONE I run into is very curious.

Joe
AB5OR



From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on 
behalf of Gary Hawkins [g...@hawkins-zhu.com]
Sent: Monday, October 16, 2017 1:28 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] SOTA Acceptance

Hi Knut,

On the contrary, I find most people are actually pretty interested in what 
you're doing, and even in this age of global reach via phone/internet often 
quite impressed by what communications can be achieved with a little radio (in 
my case a KX3) and a wire antenna. In fact, I've gone so far as flying a SOTA 
flag off my crappie pole when I'm operating encouraging folks to come over a 
ask what I'm doing.

73's Gary K6YOA
___

Message: 18
Date: Sun, 15 Oct 2017 14:21:45 -0700 (MST)
From: ab2tc>
To:elecraft@mailman.qth.net
Subject: Re: [Elecraft] Suggestions for Introducing a 10-year-old to
Amateur Radio and Electronics
Message-ID:<1508102505942-0.p...@n2.nabble.com>>
Content-Type: text/plain; charset=us-ascii

Hi again,

Not a bad idea. We were very successful in getting our four children
interesting in the outdoors. The oldest daughter and her husband are even
into backpacking in the back country (Algonquin park), something we never
got into. The other three are very good hikers, too.

I hate to be a wet blanket, but I am not sure if I understand the joy of
activating peaks on ham radio. How do other hikers react to this? I know I
am extremely annoyed by people gabbing on their cell phones on the trail. Is
ham radio that much different?

Knut - AB2TC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.net

Total Control Panel 
Login

To: 
j...@selectconnect.net
From: elecraft-boun...@mailman.qth.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Block
 this sender / 
Block
 this sender enterprise-wide
Block
 mailman.qth.net / 
Block
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Mobile Radio Dreams & the KX2

[Joe Moffatt]

Are these the mobile mounts recommended in this thread? The Sidekick... or are 
there other KX2 specific mounts?

I just bought a KX2/KXPA amp combo.

Yes, it is more expensive than other mobile options, but the better mobile rigs 
out there have been discontinued, and for new gear, this really isn't that much 
more expensive overall, especially when I also want to grab and go with my KX2 
for travel/backpacking/portable.

Joe

AB5OR

From: Elecraft [elecraft-boun...@mailman.qth.net] on behalf of Eric Swartz - 
WA6HHQ, Elecraft [e...@elecraft.com]
Sent: Tuesday, December 13, 2016 4:51 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Mobile Radio Dreams & the KX2

Scott from SideKX also has a very nice mobile mount that the KX2 just snaps
into. It in turn has holes for the very popular AMP mounting solutions.

I'm using this with a KX2 to drive a KXPA100 in my RAV4 (the one Bill, AE6JV -
the O.P. passed on the road that made him think about mobile op's :-) It fits
perfectly just below my dashboard in the center console.

See 
http://www.gemsproducts.com/product/kx2-mount/

73,

Eric WA6HHQ
/elecraft.com


/
On 12/13/2016 11:49 AM, Bill Frantz wrote:
> A few weeks ago I passed a car with the license WA6HHQ and it got me to
> thinking: What if Elecraft made a radio specifically designed as a mobile
> radio? Here are some of my ideas:
>
> It would have a UI designed to minimize driver distraction. This UI might draw
> inspiration from the 5 button AM radios of old, which could tune pre-sets
> without looking at the radio.
>
> It would:
> Cover 80M-6M with 2M and 70cm being nice additions.
>
> Be available with 50-100W maximum output
>
> Have a small control head with a separation cable if necessary.
>
> Have a "hands free" operation option
>
>
> One intriguing idea would be to use the smartphone interfaces available in
> some newer cars to provide the entire radio UI in a form that is well
> integrated into the auto console. Or at least use it as a panadapter display.
>
> 73 Bill AE6JV
__
Elecraft mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/elecraft
Help: 
http://mailman.qth.net/mmfaq.htm
Post: 
mailto:Elecraft@mailman.qth.net

This list hosted by: 
http://www.qsl.net
Please help support this email list: 
http://www.qsl.net/donate.html
Message delivered to 
j...@selectconnect.net

Total Control Panel 
Login

To: 
j...@selectconnect.net
From: elecraft-boun...@mailman.qth.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Block
 this sender / 
Block
 this sender enterprise-wide
Block
 mailman.qth.net / 
Block
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft 

Re: [Elecraft] KX2 and N1MM F-Keys

[Joe Moffatt]

Nevermind, I withdraw that question… I see it was answered earlier.


From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe 
Moffatt
Sent: Thursday, July 7, 2016 12:24 PM
To: Ryan Noguchi <ai...@yahoo.com>
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX2 and N1MM F-Keys

Speaking of this… Using N1MM… is it possible to hit the ESC key and stop 
sending whatever has been sent already?

This is forcing me to use a Winkeyer and not the KY keys with my KX3…. There 
are times you need to stop a transmission.

Joe


From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ryan 
Noguchi via Elecraft
Sent: Thursday, July 7, 2016 10:54 AM
To: elecraft <elecraft@mailman.qth.net><mailto:elecraft@mailman.qth.net%3e>
Subject: Re: [Elecraft] KX2 and N1MM F-Keys

Can Elecraft or any other knowledgeable individual explain why the KY commands 
are limited to 24 characters?
This limitation seems to come up in this list or the KX3 Yahoo list about once 
a month, but I've never seen (or found through searching the wider web) an 
explanation of what drives the 24 character limit. I'm pretty sure I'm not the 
only one who could use any larger character limit, even if it's just a few 
additional characters.
73, Ryan AI6DO

From: Bill Conkling 
<n...@widomaker.com><mailto:n...@widomaker.com%3e><mailto:n...@widomaker.com%3e><mailto:n...@widomaker.com%3e%3e>
To: K5WA 
<k...@comcast.net><mailto:k...@comcast.net%3e><mailto:k...@comcast.net%3e><mailto:k...@comcast.net%3e%3e>
Cc: elecraft 
<elecraft@mailman.qth.net><mailto:elecraft@mailman.qth.net%3e><mailto:elecraft@mailman.qth.net%3e><mailto:elecraft@mailman.qth.net%3e%3e>
Sent: Thursday, July 7, 2016 7:43 AM
Subject: Re: [Elecraft] KX2 and N1MM F-Keys

From my own experience, KY commands work but are clumsy, and there is a l limit 
to how many characters can be sent with one command, The simple switching 
circuit is quite easy to do and works extremely well,

All it takes is a 2N transistor with base connected to the proper pin (4 or 
7) thru a 1.2K (1k -1.5K) Ohm resistor, The collector goes to the plug shield 
and the emitter goes to the tip of the plug.

Plug this into the standard KUSB or standard serial cable.

…bc nr4c

> On Jul 7, 2016, at 10:26 AM, K5WA 
> <k...@comcast.net><mailto:k...@comcast.net%3e><mailto:k...@comcast.net%3e><mailto:k...@comcast.net%3e%3e>
>  wrote:
>
> Fred,
>
> One tap of the paddle stops transmission when using KY so you really don't
> need ESC.
>
> Bob K5WA
>
> From: Cady, Fred [mailto:fc...@montana.edu]
> Sent: Thursday, July 7, 2016 7:15 AM
> To: K5WA; 
> elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net><mailto:elecraft@mailman.qth.net><mailto:elecraft@mailman.qth.net%3e>
> Subject: Re: [Elecraft] KX2 and N1MM F-Keys
>
> When using KY commands in N1MM does hitting escape stop the transmission?
> If no, that would be a disadvantage to me. A couple of transistor switches,
> actually just one because you don't need PTT usually, is pretty easy to
> build. There are lots of examples of circuits out there.
> Cheers,
> Fred KE7X
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 
> n...@widomaker.com<mailto:n...@widomaker.com><mailto:n...@widomaker.com><mailto:n...@widomaker.com%3e>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to 
ai...@yahoo.com<mailto:ai...@yahoo.com><mailto:ai...@yahoo.com><mailto:ai...@yahoo.com%3e>


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to 
j...@selectconnect.net<mailto:j...@selectconnect.net><mailto:j...@selectconnect.net><mailto:j...@selectconnect.net%3e>


Total Control Panel

Login<https://asp.reflexion.net/login?domain=selectconnect.net><https://asp.reflexion.net/login?domain=selectconnect.net%3e>


To: 
j...@selectconnect.net<mailto:j

Re: [Elecraft] KX2 and N1MM F-Keys

[Joe Moffatt]

Speaking of this… Using N1MM…  is it possible to hit the ESC key and stop 
sending whatever has been sent already?

This is forcing me to use a Winkeyer and not the KY keys with my KX3…. There 
are times you need to stop a transmission.

Joe


From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ryan 
Noguchi via Elecraft
Sent: Thursday, July 7, 2016 10:54 AM
To: elecraft 
Subject: Re: [Elecraft] KX2 and N1MM F-Keys

Can Elecraft or any other knowledgeable individual explain why the KY commands 
are limited to 24 characters?
This limitation seems to come up in this list or the KX3 Yahoo list about once 
a month, but I've never seen (or found through searching the wider web) an 
explanation of what drives the 24 character limit. I'm pretty sure I'm not the 
only one who could use any larger character limit, even if it's just a few 
additional characters.
73, Ryan AI6DO

From: Bill Conkling 
To: K5WA 
Cc: elecraft 
Sent: Thursday, July 7, 2016 7:43 AM
Subject: Re: [Elecraft] KX2 and N1MM F-Keys

From my own experience, KY commands work but are clumsy, and there is a l limit 
to how many characters can be sent with one command,  The simple switching 
circuit is quite easy to do and works extremely well,

All it takes is a 2N transistor with base connected to the proper pin (4 or 
7) thru a 1.2K (1k -1.5K) Ohm resistor,  The collector goes to the plug shield 
and the emitter goes to the tip of the plug.

Plug this into the standard KUSB or standard serial cable.

…bc nr4c

> On Jul 7, 2016, at 10:26 AM, K5WA 
>  wrote:
>
> Fred,
>
> One tap of the paddle stops transmission when using KY so you really don't
> need ESC.
>
> Bob K5WA
>
> From: Cady, Fred [mailto:fc...@montana.edu]
> Sent: Thursday, July 7, 2016 7:15 AM
> To: K5WA; elecraft@mailman.qth.net
> Subject: Re: [Elecraft] KX2 and N1MM F-Keys
>
> When using KY commands in N1MM does hitting escape stop the transmission?
> If no, that would be a disadvantage to me.  A couple of transistor switches,
> actually just one because you don't need PTT usually, is pretty easy to
> build.  There are lots of examples of circuits out there.
> Cheers,
> Fred KE7X
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ai...@yahoo.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.net


Total Control Panel

Login


To: 
j...@selectconnect.net

From: elecraft-boun...@mailman.qth.net


Message Score: 1

High (60): Pass

My Spam Blocking Level: Medium

Medium (75): Pass


Low (90): Pass

Block
 this sender / 
Block
 this sender enterprise-wide

Block
 mailman.qth.net / 
Block
 mailman.qth.net enterprise-wide



This message was delivered because the content filter score did not exceed your 
filter level.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] THE EFFORT OF FIELD DAY

[Joe Moffatt]

For everyone that complains about kids and their X Boxes, etc, I have a simple 
question for you.  Have you ever asked them to participate with you in an event 
like FD?

Guess what, some of the kids LOVE it.  They like to be included and wanted.
Not all kids are that way, but there are more than you think.  In fact, I have 
found some of the more gadgety kids take a real interest in CW.  They find 
using a key to spell their name very intriguing.

Next time you have an event, ask them to come eat some free food and tinker 
around with you.

joe



From: Elecraft [elecraft-boun...@mailman.qth.net] on behalf of Anthony 
Scandurra [anthony.scandu...@gmail.com]
Sent: Monday, June 27, 2016 6:37 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] THE EFFORT OF FIELD DAY

I am happy to report that my 11 year old son, who plays on a PS4, a Xbox,
and his own computer, participated in FD at my local club's operation for
his first time.

He made 63 Qs with help from Dear Old Dad on the GOTA station. He is also
studying for his Technician class license.

He said over and over again, "Best weekend ever!" to both his mother and
me. He's already planning for next year.

BTW, we had two other youths at the site who have been hams for years now.
They both have very active lives outside of ham radio, but they still love
the hobby.

Don't give up on our youth! Ham radio still holds appeal!

73, Tony K4QE (licensed at age 14 over 37 years ago)


On Mon, Jun 27, 2016 at 7:25 PM, Bill 

 wrote:

> "Bring on the youngsters?" Sure - If you can tear them away from
> their smart phones and XBoxes!
>
> Bill W2BLC K-Line
>
>
> __
> Elecraft mailing list
> Home: 
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: 
> http://mailman.qth.net/mmfaq.htm
> Post: 
> mailto:Elecraft@mailman.qth.net
>
> This list hosted by: 
> http://www.qsl.net
> Please help support this email list: 
> http://www.qsl.net/donate.html
> Message delivered to 
> anthony.scandu...@gmail.com
>
__
Elecraft mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/elecraft
Help: 
http://mailman.qth.net/mmfaq.htm
Post: 
mailto:Elecraft@mailman.qth.net

This list hosted by: 
http://www.qsl.net
Please help support this email list: 
http://www.qsl.net/donate.html
Message delivered to 
j...@selectconnect.net

Total Control Panel 
Login

To: 
j...@selectconnect.net
From: elecraft-boun...@mailman.qth.net

Message Score: 2High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Block
 this sender / 

Re: [Elecraft] New KX2

[Joe Moffatt]

I agree with you... I use my KX3 mobile, but it is a bit of a clumsy thing 
(though I use it with only 15 watts, it works wonders).

I will add the 100 watt amp at some point.  I don't need the 2 bands, so I 
would be VERY interested in this rig.

joe



From: Elecraft [elecraft-boun...@mailman.qth.net] on behalf of w7aqk 
[w7...@cox.net]
Sent: Wednesday, May 18, 2016 9:52 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] New KX2

Hi All,

Well, those hoping for a K4 have been foiled again

Interesting that Elecraft chose to go with a reduced sized KX3 as their new
offering, but it does make some sense. There are several new, smaller QRP
rigs coming out these days, and possibly this may blunt the interest in
those to some extent. It's also just a tad bit irritating that the info we
are seeing, for the most part, is coming out of Japan!!! I don't quite get
that. Well, we are probably only a few days away from more info here.

As an owner of a KX3, I won't be moved too quickly to jump on this new
offering. However, those on the fence up to now may find this to be a more
appealing option. It's not yet clear what you are giving up--a couple of
watts apparently, and a couple of bands at both ends of the HF spectrum (160
and 6). I assume the PX3 will mate with the KX2, but not sure. Hopefully
the ATU option will be as good.

One thing that intrigues me somewhat is that the KX2, combined with the
KPAX100, might be a more versatile portable/mobile combination than the KX3
as a substitute. For mobile operating, the KX3 is a bit clumsy, but the
reduced size of the KX2 might make it work better--not sure.

Anyway, I just continue to be fascinated with what Elecraft comes up with.
They are fun to watch! I had sort of expected maybe something with a larger
display, and maybe a touch screen, but not yet! That may be a K4 feature,
whenever that comes about.

Dave W7AQK


__
Elecraft mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/elecraft
Help: 
http://mailman.qth.net/mmfaq.htm
Post: 
mailto:Elecraft@mailman.qth.net

This list hosted by: 
http://www.qsl.net
Please help support this email list: 
http://www.qsl.net/donate.html
Message delivered to 
j...@selectconnect.net

Total Control Panel 
Login

To: 
j...@selectconnect.net
From: elecraft-boun...@mailman.qth.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Block
 this sender / 
Block
 this sender enterprise-wide
Block
 mailman.qth.net / 
Block
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered 

Re: [Elecraft] Elecraft Centric

[Joe Moffatt]

I do too just saying what I've been reading a lot.

Joe





Sent via the Samsung Galaxy Note® 4, an AT 4G LTE smartphone


 Original message 
From: Phil Wheeler <w...@socal.rr.com>
Date: 05/02/2016 4:03 PM (GMT-06:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Centric

Joe,

Crucial difference is that the KX3 system is
modular and the barefoot KX3 can be used very
effectively battery operated for SOTA, camping and
the like. I suspect the IC-7300 was not designed
for power efficiency :-)

So I see them as a very different class of rig.

73, Phil W7OX

On 5/2/16 11:48 AM, Joe Moffatt wrote:
> This is very true to me as well. One thing that I am seeing in several places 
> online right now is that the 7300 Icom is a big competitor to the KX3. A lot 
> of folks are saying that why spend the money for a KX3 when you can have a 
> panadapter, 100 watts, etc built in for much less money than the 
> KX3/PX3/KPA100 combination.
>
> This is relative to Elecraft and the KX3 in particular because this may turn 
> out to be a major competitor to the KX3 series, or not, but it is certainly a 
> relative discussion.
>
> Anyhow, I don't mean to hijack the list, but other products do affect 
> Elecraft and their users.
>
> Joe
>
>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.net<mailto:j...@selectconnect.net>

Total Control Panel 
Login<https://asp.reflexion.net/login?domain=selectconnect.net>

To: 
j...@selectconnect.net<https://asp.reflexion.net/address-properties?aID=750607761=selectconnect.net>
From: elecraft-boun...@mailman.qth.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Block<https://asp.reflexion.net/FooterAction?ver=3=1=14769088840=selectconnect.net>
 this sender / 
Block<https://asp.reflexion.net/FooterAction?ver=3=1=1=14769088840=selectconnect.net>
 this sender enterprise-wide
Block<https://asp.reflexion.net/FooterAction?ver=3=1=14769088840=selectconnect.net>
 mailman.qth.net / 
Block<https://asp.reflexion.net/FooterAction?ver=3=1=1=14769088840=selectconnect.net>
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Elecraft Centric

[Joe Moffatt]

This is very true to me as well.  One thing that I am seeing in several places 
online right now is that the 7300 Icom is a big competitor to the KX3.  A lot 
of folks are saying that why spend the money for a KX3 when you can have a 
panadapter, 100 watts, etc built in for much less money than the KX3/PX3/KPA100 
combination.

This is relative to Elecraft and the KX3 in particular because this may turn 
out to be a major competitor to the KX3 series, or not, but it is certainly a 
relative discussion.

Anyhow, I don't mean to hijack the list, but other products do affect Elecraft 
and their users.

Joe


From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David 
Gilbert
Sent: Monday, May 2, 2016 1:19 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Centric


Thankfully you don't get to make that call, and Eric has already laid
out the guidelines describing to what extent he considers pro/con
comments on other rigs to be appropriate for this list. For me, I find
it very valuable to understand how my K3 stacks up to other rigs as long
as such posts don't dominate the list. I prefer not to live in a silo.

Dave AB7E


On 5/2/2016 10:42 AM, Harry Yingst via Elecraft wrote:
> I also have been thinking this lately
> If it's not an Elecraft product then please use the appropriate forum.
>
>
>
>
> From: Ken G Kopp 
> To: g...@ka1j.com; 
> elecraft@mailman.qth.net
> Sent: Monday, May 2, 2016 12:39 PM
> Subject: Re: [Elecraft] Elecraft Centric
>
> Well-said, Gary ...
>
> This was a topic at our local coffee gathering this AM.
>
> 73
>
> Ken - K0PP
>
> 73
>
> Ken, K0PP
> On May 2, 2016 10:30, "Gary Smith"  
> wrote:
>
>> Folks,
>>
>> Till now I've kept my thoughts to myself regarding some of the
>> lengthy threads here, discussing other radios/Competition for
>> Elecraft products. I personally find these threads irritating and
>> here is why:
>>
>> This is the only place on the internet where I can find answers to my
>> questions about the K3 and K3s I own and I don't like seeing it used
>> as a platform for discussing the pros & Cons of non Elecraft radios.
>>
>> I can't imagine going to an Icom forum and discussing at length my
>> and other's opinions about Elecraft or any other manufacturer. The
>> only reason I would dream of going to any brand specific forum is to
>> hear information on that manufacturer's radios.
>>
>> Before I joined this forum close to 10 years ago, I was on the TenTec
>> reflector, reading daily as I wanted to buy one of the newer radios
>> with better hearing than my Corsair II. At that time I was
>> considering the Orion line. I had been disappointed with how that
>> company at the time, was not handling some of the long term
>> complaints I was reading on their reflector about a lack of updates
>> and issues with end of life parts being soon unobtanium. With that
>> being a real concern to me, I looked to threads on the eHam forums
>> and read about Elecraft in the discussions and found this reflector.
>>
>> I used this Elecraft forum as a learning tool before buying my first
>> K3 and appreciated the dedication of the members and then to my
>> pleasant surprise to find the owners of the company were frequent,
>> often daily contributors to the threads. It took me awhile to realize
>> I wasn't interested in a K1 or K2 but the K3 was going to fit my
>> needs and it was made in America and I wasn't going to buy from
>> overseas if what I want was made here. That an option to buy a kit
>> was included made it a lock for me to buy the K3 kit with most all of
>> the options available.
>>
>> But my point being what I said that above; I turned to this forum to
>> hear about Elecraft products and issues, not to read lengthy
>> discussions about competitors products. I still consider that is the
>> purpose of this forum and I am bemused why people tout other
>> equipment here, it's just bad form. I would consider myself being
>> rude and a jerk if I went to the Icom forum and started threads about
>> how wonderful my Elecraft XYZ was.
>>
>> Just my 2 cents.
>>
>> 73 to all,
>>
>> Gary
>> KA1J
>> K3s #10622
>> K3 #2382
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kengk...@gmail.com
>>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support 

[Elecraft] KX3 Solar backpacking power advice

[Joe Moffatt]

Hey guys...

I tried to search through the list to find what I wanted, but I can't find 
exactly the info I think I need.

Anyhow, I am trying to figure out what to use for portable solar rechargeable 
power while backpacking in the mountains.   My typical trip will be 2-3 days, a 
few hours a day operating primarily CW.   5 watts is fine for CW

Anyhow, I am curious for recommendations.

Thanks,

Joe
AB5OR
Tupelo, MS

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX3 used market

[Joe Moffatt]

I have a question for a friend who is looking for a KX3 used.   Are older 
serial numbers like the 2000s vs 7000s different hardware?

In other words, what on the used market should he look for, or is there much 
difference.  I know the K3 series are different, but I don't know about the 
KX3s.

I have a very recent KX3, and he badly wants one now.
73 to all

Joe
AB5OR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] 160 meters RX antenna for K3 advice

[Joe Moffatt]

This is interesting and may be something to "get my feet wet"

Joe



From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Petr, 
OK1RP/M0SIS
Sent: Tuesday, February 9, 2016 8:58 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 160 meters RX antenna for K3 advice

Hi Joe,

an easy and cheap starting point (weekend project) is the W2PM Mini-Diamond
loop connected thru W7IUV preamplifier and KD9SV front-end saver to Ext.RX
ant port of your K3.

It is just 1.5m square wire loop with loading resistor and feedline
transformer so it will fit anywhere even on balcony or inside of house
attic. ( but I recommend to place it as far from house noise as possible)

There is several other more powerful RX antennas like K9AY etc. but this is
cheap and easy to try.
Let me know if you want to send more instructions and help.

The best but more complicate solution which need more space and effort in
building is definitely 3-el. Hi-Z verticals array. It will fit to 15x15m
triangle lot and it will be hard to beat I guess.

GL 73 - Petr, OK1RP
http://160mband.blogspot.com



-
http://ok1rp.blogspot.com
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/160-meters-RX-antenna-for-K3-advice-tp7613761p7613784.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.net


Total Control Panel

Login


To: 
j...@selectconnect.net

From: elecraft-boun...@mailman.qth.net


Message Score: 1

High (60): Pass

My Spam Blocking Level: Medium

Medium (75): Pass


Low (90): Pass

Block
 this sender / 
Block
 this sender enterprise-wide

Block
 mailman.qth.net / 
Block
 mailman.qth.net enterprise-wide



This message was delivered because the content filter score did not exceed your 
filter level.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] 160 meters RX antenna for K3 advice

[Joe Moffatt]

I am needing advice from any with a K3 for 160 receive antennas.

I just don't have room for Beverages, but I do have some backyard area.  The 
average noise floor here is about S7 ok my Inverted L.

Of course there are times it is much higher, but that is the norm.

I am wondering if a small loop, EWE, flag etc is what you guys would recommend.

I am looking for anyone with a relatively small space that could give advice.

What would you do or have you done?
Trying to get my 160  DXCC, and I'm half way there on 160.

Joe
AB5OR






Sent via the Samsung Galaxy Note® 4, an AT 4G LTE smartphone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 RTTY NO DVR message on memory

[Joe Moffatt]

When using RTTY, usually I can hit M1 to give my callsign like in CW mode

But today that quit working, but it still works in CW mode Anyone have any 
idea what I did wrong?

It displays NO DVR when I do that.

Joe
AB5OR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 RTTY NO DVR message on memory

[Joe Moffatt]

I'll answer this myself... I just found via google another had the same problem.

In my case, the mode on that band was set for AFSK A , not FSK mode.  The M 
keys only work on FSK as far as I can tell.

Joe



From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe 
Moffatt
Sent: Sunday, October 11, 2015 4:03 PM
To: elecraft <elecraft@mailman.qth.net>
Subject: [Elecraft] K3 RTTY NO DVR message on memory

When using RTTY, usually I can hit M1 to give my callsign like in CW mode

But today that quit working, but it still works in CW mode Anyone have any 
idea what I did wrong?

It displays NO DVR when I do that.

Joe
AB5OR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.net<mailto:j...@selectconnect.net>


Total Control Panel

Login<https://asp.reflexion.net/login?domain=selectconnect.net>


To: 
j...@selectconnect.net<https://asp.reflexion.net/address-properties?aID=750607761=selectconnect.net>

From: elecraft-boun...@mailman.qth.net<mailto:elecraft-boun...@mailman.qth.net>


Message Score: 1

High (60): Pass

My Spam Blocking Level: Medium

Medium (75): Pass


Low (90): Pass

Block<https://asp.reflexion.net/FooterAction?ver=3=1=12710522933=selectconnect.net>
 this sender / 
Block<https://asp.reflexion.net/FooterAction?ver=3=1=1=12710522933=selectconnect.net>
 this sender enterprise-wide

Block<https://asp.reflexion.net/FooterAction?ver=3=1=12710522933=selectconnect.net>
 mailman.qth.net / 
Block<https://asp.reflexion.net/FooterAction?ver=3=1=1=12710522933=selectconnect.net>
 mailman.qth.net enterprise-wide



This message was delivered because the content filter score did not exceed your 
filter level.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX3. Finally bought one

[Joe Moffatt]

I bought the ATU and the Roofing Filter.  I will be buying a PX3 eventually as 
well as the amp just to have on my desk for a second radio... or at least I 
think I'll do that.

Next is to buy the P3 and PX3 (for my K3 and this one).  I have an Afedri SDR 
connected to the K3 IF now running NAP3 and it is great, but the standalone P3 
is what I really want.

Joe



From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James 
Austin
Sent: Tuesday, August 25, 2015 8:41 AM
Cc: elecraft elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3. Finally bought one

It's a fun radio to operate, you'll love it.

Did you get any options to go with it? I ordered a PX3 at a hamfest a few
days ago, looking forward to it arriving.

Jim
KA2RVO

On Tue, Aug 25, 2015 at 9:27 AM, Joe Moffatt 
j...@selectconnect.netmailto:j...@selectconnect.net%3e wrote:

 To add to my K3, and KX1, I finally added a KX3 yesterday. Can't wait
 for it to arrive.

 Have no idea what all I'll do with it, but I am excited.

 73,

 Joe
 AB5OR
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to ka2...@gmail.commailto:ka2...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net


Total Control Panel

Loginhttps://asp.reflexion.net/login?domain=selectconnect.net


To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net

From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=12183547090domain=selectconnect.net


Message Score: 1

High (60): Pass

My Spam Blocking Level: Medium

Medium (75): Pass


Low (90): Pass

Blockhttps://asp.reflexion.net/FooterAction?ver=3bl-sender-address=1hID=12295593526domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=3ent=1bl-sender-address=1hID=12295593526domain=selectconnect.net
 this sender enterprise-wide

Blockhttps://asp.reflexion.net/FooterAction?ver=3bl-sender-domain=1hID=12295593526domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=3ent=1bl-sender-domain=1hID=12295593526domain=selectconnect.net
 mailman.qth.net enterprise-wide



This message was delivered because the content filter score did not exceed your 
filter level.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX3. Finally bought one

[Joe Moffatt]

To add to my K3, and KX1, I finally added a KX3 yesterday.Can't wait for it 
to arrive.

Have no idea what all I'll do with it, but I am excited.

73,

Joe
AB5OR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 so2r advice please

[Joe Moffatt]

Thanks... I have the antennas to use,  I just don't have all the other stuff..  
I'm planning for upgrading over the next few months to support SO2R, so this is 
good info.

Joe
AB5OR


From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave 
Hachadorian
Sent: Saturday, July 4, 2015 8:21 AM
To: Reflector Elecraft
Subject: Re: [Elecraft] K3 so2r advice please

You need a pair of bandpass filters, such as Dunestar 600.
You need a means of distributing all antennas among 2 radios, such as the WX0B 
Six-Pak.
You need two band decoders, such as W9XT, for the BPFs/Six-Pak.
You need an audio box (Dunestar makes one) that can select:
left radio in both ears.
right radios in both ears.
left radio in left ear, right radio in right ear.
You should have a Winkey USB for 2 radio CW and all-mode PTT.
You also need one antenna per band, or two tribanders, or one tribander and a 
triplexer.
You need two amplifiers.

That's all I have.

Dave Hachadorian, K6LL
Yuma, AZ



-Original Message-
From: Joe Moffatt
Sent: Friday, July 3, 2015 9:19 PM
To: elecraft
Subject: [Elecraft] K3 so2r advice please

Strongly thinking of getting into so2r primarily for cw. With 2
K3's, what external hardware do I need? I realize this info is
out there, but I really want some practical real world advice.

Thanks,

Joe
AB5OR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to k6ll.d...@gmail.commailto:k6ll.d...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net


Total Control Panel

Loginhttps://asp.reflexion.net/login?domain=selectconnect.net


To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net

From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=11662279409domain=selectconnect.net


Message Score: 1

High (60): Pass

My Spam Blocking Level: Medium

Medium (75): Pass


Low (90): Pass

Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=11662279409domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=11662279409domain=selectconnect.net
 this sender enterprise-wide

Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=11662279409domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=11662279409domain=selectconnect.net
 mailman.qth.net enterprise-wide



This message was delivered because the content filter score did not exceed your 
filter level.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 so2r advice please

[Joe Moffatt]

Strongly thinking of getting into so2r primarily for cw.  With 2 K3's, what 
external hardware do I need?  I realize this info is out there, but I really 
want some practical real world advice.

Thanks,

Joe
AB5OR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 FD report in high RF (K3 vs Flex 6xxx)

[Joe Moffatt]

I will do that soon.


 Original message 
From: N1EU n1eu.ba...@gmail.com
Date: 2015/07/01 10:54 AM (GMT-06:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 FD report in high RF (K3 vs Flex 6xxx)

joemoffatt wrote
 Kinda what I thought. We are going to set up again like this to see what
 happens.

Please report back with what happens Joe.

Unfortunately, the current implementation of SmartSDR (Flex 6K software)
does not provide an ADC overload indication like PowerSDR does so you would
just need to elicit the interference and see if attenuation alleviates the
receiver blocking.

Barry N1EU




--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-FD-report-in-high-RF-K3-vs-Flex-6xxx-tp7604461p7604496.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net

Total Control Panel 
Loginhttps://asp.reflexion.net/login?domain=selectconnect.net

To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net
From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=11662279409domain=selectconnect.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=11662279409domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=11662279409domain=selectconnect.net
 this sender enterprise-wide
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=11662279409domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=11662279409domain=selectconnect.net
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 FD report in high RF (K3 vs Flex 6xxx)

[Joe Moffatt]

Kinda what I thought.  We are going to set up again like this to see what 
happens.

I've said it before, I am not a Flex basher.I have owned 2 of them and 
regularly operate 2 more.   I like their company.   I do prefer my setup more, 
but I admire what they bring to the table.

Joe


 Original message 
From: N1EU n1eu.ba...@gmail.com
Date: 2015/07/01 6:50 AM (GMT-06:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 FD report in high RF (K3 vs Flex 6xxx)

joemoffatt wrote
 The K3 and Orion absolutely crushed the Flex's. The Flex's got destroyed
 by in band interference from the CW guys, but we never heard them.

I don't think you can necessarily make that conclusion without further
testing. If the K3/Orion transmitters had significantly more spurious tx
products than the Flex transmitters, that could also explain why the Flex
receivers seemed impaired compared to the K3/Orion. I'm not suggesting that
was the case, but you need more data to reach a conclusion.

73, Barry N1EU




--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-FD-report-in-high-RF-K3-vs-Flex-6xxx-tp7604461p7604491.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net

Total Control Panel 
Loginhttps://asp.reflexion.net/login?domain=selectconnect.net

To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net
From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=11662279409domain=selectconnect.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=11662279409domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=11662279409domain=selectconnect.net
 this sender enterprise-wide
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=11662279409domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=11662279409domain=selectconnect.net
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 FD report in high RF (K3 vs Flex 6xxx)

[Joe Moffatt]

Guys,

I just had the very fortunate (for me) experience of operating my K3 in a 4F 
category with some good operators.   My CW station was
My K3, and the other was an Orion 1.   The 2 SSB stations were a Flex 6500 and 
a 6300.

Due to space limitations, this is a very high RF environment.  We used Dunestar 
filters, and as much antenna separation as we could, but
It was what it was.

The K3 and Orion absolutely crushed the Flex's.  The Flex's got destroyed by in 
band interference from the CW guys, but we never heard them.
I thought that was a bit odd. Anyhow, to be fair, I didn't get to switch to 
their antennas to see how different they would be.

But I will say this... numerous times during FD, the computers on the Flex's 
locked up, usually forcing a reboot.  That greatly upset the old school
Operators.   Meanwhile, the K3 performed like a rock star, and we racked up 
LOTS of CW QSOs on it... well over 1000.

Just wanted to say that the K3 is very dear to me, and until the Flex's can be 
operated without a computer, there really isn't a comparison in
Real world operation.   I realize mileage may vary, but I was VERY impressed 
and proud of my K3 in this contest.

Mine is one of the last one's pre K3S and does have the new synth.  I love it 
dearly.

I think our total score for the effort was over 9000 QSO points, about 2600 
QSO's combined between all.

Joe
AB5OR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and KSYN3A in FD

[Joe Moffatt]

I had almost the exact same experience.   A lot of times I have to remind 
myself that the K3 is so good, I need to give more room in the normal passband 
because I can't hear strong guys right next to me.

I have an Afedri SDR on my IF for my PAN, and I see that a lot.

Joe

AB5OR


From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Blair 
Bates
Sent: Monday, June 29, 2015 3:23 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 and KSYN3A in FD

Had the opportunity to operate two, different K3 transceivers, both with
the new KSYN3A boards, during FD.

A few CW observations:
1. The only way I became aware of a station moving close to me was when my
rate dropped. A glance at the P3, or opening up the receiver bandwidth,
always revealed that somebody loud had moved in really close. Since not
everyone has K3 . . . my rate fell in what was QRM for other receivers.

2. The bands seemed really big. I was always able to quickly find a run
frequency when moving from another band or mode.

3. In spite of rainstorms for about 23 hours of FD, the bands seemed quiet
and lightning crackles were quite subdued.

I'm sure that these observations are routine for experienced K3 users.
For somebody who is still trying to decide, or is still feeding the piggy
bank, the K3 has one H3LL of a receiver--especially when equipped with the
KSYN3A board.

73, K3YD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net


Total Control Panel

Loginhttps://asp.reflexion.net/login?domain=selectconnect.net


To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net

From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=11662279409domain=selectconnect.net


Message Score: 1

High (60): Pass

My Spam Blocking Level: Medium

Medium (75): Pass


Low (90): Pass

Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=11662279409domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=11662279409domain=selectconnect.net
 this sender enterprise-wide

Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=11662279409domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=11662279409domain=selectconnect.net
 mailman.qth.net enterprise-wide



This message was delivered because the content filter score did not exceed your 
filter level.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Enhancement

[Joe Moffatt]

I am.doing that exactly with a $250 afrdri SDR and an audio mixer panel.

I don't miss my flex at all!

And let me just tell you, you will not get K3 performance unless you buy a 6700 
flex at almost double the cost of a k3 with sub Rx.

I have been an avid flex user for 3 years but the K3 is far superior in a lot 
of ways.   Listening fatigue, afx, filtering that is a brick wall, and quick 
tunability make the K3 a much better option for me.

Don't get me started on operating system lockups.   I am an IT consultant by 
profession with thousands and thousands of support hours under by belt, and 
even I have occasional problems.

When my PC dies, or gets a reboot, my K3 is still going strong.   That has 
tremendous value to me.

One misfire in a major contest and you'll wish for the standalone K3.   I know 
from experience!

Joe
PS.  I think the Flex radios are awesome.   I have nothing against them or 
their company and they have provided a tremendous resource for ham radio.  I 
just think the K3 is a better value for the money.

Joe
AB5OR



 Original message 
From: Joe Subich, W4TV li...@subich.com
Date: 04/03/2015 2:29 PM (GMT-06:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Enhancement


 This is possible using SDR software with an I/Q feed from the K3 IF.
 Check out the LP Pan unit and NaP3 SDR software.

This is also possible with many stand alone SDR receivers like SDR-IQ,
Elad, etc. Software like SpectraVue (SDR-IQ) or HDSDR (generic) can
link the SDR receiver to the K3 IF frequency. Many of the stand alone
SDR receivers will provide better performance, greater image rejection
and wider bandwidth than possible with LP-Pan/NaP3.

73,

... Joe, W4TV


On 2015-04-03 3:00 PM, Jim Brown wrote:
 On Fri,4/3/2015 10:59 AM, Guy Olinger K2AV wrote:
 In the Flex series, a second RX is a matter of more software and the
 memory
 and processor capacity to service it.

 But not a second antenna for diversity reception.

 Bruce also asked, short of having a second subreceiver in the K3 (which
 I do not have) - When operating Split, I know you can quickly switch
 between DX and calling stations by holding the REV button. The problem
 of course is you can only hear one or the other. Is it within reach of a
 simple software enhancement from our heroes at Elecraft to route these
 two audio signals to the left and right headphone channels from VFO A
 and B?

 Answer:

 This is possible using SDR software with an I/Q feed from the K3 IF.
 Check out the LP Pan unit and NaP3 SDR software. You will also need a
 suitable sound card with stereo inputs and outputs. This software
 creates two SDR receivers within the computer, which can then be fed to
 the computer's sound card for playback. You plug your headphones into
 the computer's sound card output.

 The better the sound card, the better this will work. The wider the
 bandwidth of the sound card, the greater the width of the spectrum you
 can display. The software is free. LP-PAN costs $250. The recommended
 ASUS USB sound card costs $65.

 http://www.telepostinc.com/P3_comp.html

 73, Jim K9YC


 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to li...@subich.commailto:li...@subich.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net

Total Control Panel 
Loginhttps://asp.reflexion.net/login?domain=selectconnect.net

To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net
From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=3098220802domain=selectconnect.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3098220802domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3098220802domain=selectconnect.net
 this sender enterprise-wide
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3098220802domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3098220802domain=selectconnect.net
 mailman.qth.net enterprise-wide


This message was delivered 

Re: [Elecraft] RTTY K3 Help

[Joe Moffatt]

I think I actually misworded things.

I have N1MM and use it for CW all the time.

I have the audio cables, and everything works fine for AFSK PSK31.

I just have little experience recently with RTTY, and I just want to set it up 
correctly.

Joe



From: Gordon LaPoint [mailto:gordon.lapo...@gmail.com]
Sent: Monday, March 30, 2015 1:51 PM
To: Joe Moffatt; 'Elecraft Reflector'
Subject: Re: [Elecraft] RTTY K3 Help

On 03/30/2015 02:42 PM, Joe Moffatt wrote:
 Apparently I haven't fooled with RTTY of any seriousness in years, but I am 
 starting to get interested in DX chasing with it.

 So, how do you guys recommend setting up the K3. I see FSK is much preferred 
 by most to AFSK using say FLDIGI and audio input now days.

 I know VERY little about this. I am a CW DX'er, but just interested in 
 learning this and possibly doing a contest sometime.

 Thanks,

 Joe
 AB5OR
 Tupelo, MS


Joe,
What are you using for software? Do you have the interface's
built, or bought?
See: http://www.aa5au.com/rtty/ and: http://www.rttycontesting.com/

I do lots of RTTY contesting using a K3 and WriteLog for software. N1MM
also works good.

Gordon - N1MGO


Total Control Panel

Loginhttps://asp.reflexion.net/login?domain=selectconnect.net


To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net

From: 
gordon.lapo...@gmail.comhttps://asp.reflexion.net/address-properties?aID=3174176846domain=selectconnect.net


Message Score: 50

High (60): Pass

My Spam Blocking Level: Medium

Medium (75): Pass


Low (90): Pass

Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3174176846domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3174176846domain=selectconnect.net
 this sender enterprise-wide

Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3174176846domain=selectconnect.net
 gmail.com / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3174176846domain=selectconnect.net
 gmail.com enterprise-wide



This message was delivered because the content filter score did not exceed your 
filter level.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] RTTY K3 Help

[Joe Moffatt]

Apparently I haven't fooled with RTTY of any seriousness in years, but I am 
starting to get interested in DX chasing with it.

So, how do you guys recommend setting up the K3.  I see FSK is much preferred 
by most to AFSK using say FLDIGI and audio input now days.

I know VERY little about this.  I am a CW DX'er, but just interested in 
learning this and possibly doing a contest sometime.

Thanks,

Joe
AB5OR
Tupelo, MS




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] RTTY K3 Help

[Joe Moffatt]

Definitely going to try that!




 Original message 
From: Joe Subich, W4TV li...@subich.com
Date: 03/30/2015 3:03 PM (GMT-06:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] RTTY K3 Help


 I have the audio cables, and everything works fine for AFSK PSK31.

If everything works normally for PSK31, you should be able to use
the same configuration *except* you select AFSK A for RTTY in the
K3.

That should work with MMTTY or the MMTTY interface built into the
Digital Interface of N1MM Logger.

73,

... Joe, W4TV


On 2015-03-30 2:56 PM, Joe Moffatt wrote:
 I think I actually misworded things.

 I have N1MM and use it for CW all the time.

 I have the audio cables, and everything works fine for AFSK PSK31.

 I just have little experience recently with RTTY, and I just want to set it 
 up correctly.

 Joe



 From: Gordon LaPoint [mailto:gordon.lapo...@gmail.com]
 Sent: Monday, March 30, 2015 1:51 PM
 To: Joe Moffatt; 'Elecraft Reflector'
 Subject: Re: [Elecraft] RTTY K3 Help

 On 03/30/2015 02:42 PM, Joe Moffatt wrote:
 Apparently I haven't fooled with RTTY of any seriousness in years, but I am 
 starting to get interested in DX chasing with it.

 So, how do you guys recommend setting up the K3. I see FSK is much preferred 
 by most to AFSK using say FLDIGI and audio input now days.

 I know VERY little about this. I am a CW DX'er, but just interested in 
 learning this and possibly doing a contest sometime.

 Thanks,

 Joe
 AB5OR
 Tupelo, MS


 Joe,
 What are you using for software? Do you have the interface's
 built, or bought?
 See: http://www.aa5au.com/rtty/ and: http://www.rttycontesting.com/

 I do lots of RTTY contesting using a K3 and WriteLog for software. N1MM
 also works good.

 Gordon - N1MGO

 
 Total Control Panel

 Loginhttps://asp.reflexion.net/login?domain=selectconnect.net


 To: 
 j...@selectconnect.netmailto:j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net

 From: 
 gordon.lapo...@gmail.commailto:gordon.lapo...@gmail.comhttps://asp.reflexion.net/address-properties?aID=3174176846domain=selectconnect.net


 Message Score: 50

 High (60): Pass

 My Spam Blocking Level: Medium

 Medium (75): Pass


 Low (90): Pass

 Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3174176846domain=selectconnect.net
  this sender / 
 Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3174176846domain=selectconnect.net
  this sender enterprise-wide

 Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3174176846domain=selectconnect.net
  gmail.com / 
 Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3174176846domain=selectconnect.net
  gmail.com enterprise-wide



 This message was delivered because the content filter score did not exceed 
 your filter level.



 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to li...@subich.commailto:li...@subich.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net

Total Control Panel 
Loginhttps://asp.reflexion.net/login?domain=selectconnect.net

To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net
From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=3098220802domain=selectconnect.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3098220802domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3098220802domain=selectconnect.net
 this sender enterprise-wide
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3098220802domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3098220802domain=selectconnect.net
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft mailing list

[Elecraft] K3 APF

[Joe Moffatt]

I can't find the CONFIG: DUAL PB setting to enable APF in my K3.  Am I missing 
something?

This is an up to date new K3.

Thanks,

73
Joe
AB5OR



From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of jim
Sent: Monday, March 23, 2015 5:41 PM
To: 'Grant Youngman'
Cc: 'Elecraft Reflector'
Subject: Re: [Elecraft] K3 AM Performance

Grant,

No ideology here, just the brutal facts of business.

If people do not like the feature set of a product, people will not purchase
it.

If Elecraft does not appeal to the market segment that buys a radio for the
features they offer, they will soon begin to dwindle and ultimately die.
Then there are zero resources for anything.

I personally think a better CW code reader would be a better use of
resources compared to AM.

Do you think new buyers of radios are more interested in AM performance, or
the ability of the radio to decode CW (for those that don't know CW). Of
those two categories of buyers, which one has a larger number of people?

A company (or senator, or representative, or president, or any elected
official) MUST focus their efforts, or fall prey to competition that does
focus on the majority. If not, they perish.

Technology, while important, is not the only factor. There are more CW
operators in the world than there are AM'ers. That fact makes Elecraft's
decision easier. Focus on CW as opposed to AM. They did this very same
thing with the recent release of the synth. The new synth makes little
difference on SSB (and AM for that matter) and has it's impact on CW. BUT
not that much of an impact on a band that is not crowded. It only shines on
a crowded CW band like Sweepstakes, 160 meter contests, and the like.

My interest is CW, without a computer. Hence my decision to go with the K3.
I had a TS-480, and it worked great and met my CW needs. There was no real
reason to change to a K3, as for my style of operation, the 480 was good.
But the 480 did not have a panadaptor or a roofing filter, that was
important to me. So, Kenwood lost a customer, and Elecraft picked one up.

Those are the realities of the market. If Kenwood loses to many customer,
the will go the way of the Globe's, the Vikings, the Drakes, the Eicos, the
Heathkits, the Hallicrafters, the Collins. The list goes on and on and on.

BTW, I am an old phart too.

Jim
W6AIM


-Original Message-
From: Grant Youngman [mailto:n...@tx.rr.com]
Sent: Monday, March 23, 2015 2:55 PM
To: jim
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K3 AM Performance

I don't know who you consider to be the big 3. Some oh-not-so-old
Kenwood radios are excellent on AM. The Orion I/II is truly an excellent AM
transmitter (I owned 3 of them, and even now they aren't exactly shabby on
any other mode). The Flex-most-anything can be broadcast quality (perhaps
you should seek one out).

There is a large, vibrant, and growing AM community (who's technology is far
younger than CW). Universally, they dis the K3 for its poor (relatively) AM
performance, and avoid it (in some quarters with great disdain) for that
reason. Frankly, I'm getting too old to keep hauling around a Globe King
500 and a Globe Champion 300.

Given the K3 is an SDR -- there is no reason (well, other than mode bias
perhaps and a few (100/1000) lines of code that it could not also meet the
needs of the AM community and become a popular radio there.

I get exceedingly tired at being scolded for being an old f*rt, simply for
enjoying an operating mode that is younger than CW. (And, by the way, I like
CW too, and SSB, and various digi modes from time to time).

There are many groups of hams involved in many different aspects of the
hobby. I'd respectfully suggest we might want to be a bit more respectful of
ALL, even if they don't fit with our personal ham radio ideology. But
that's another subject for a different venue. .. :(

Grant NQ5T


Sent from my iPhone

 On Mar 23, 2015, at 4:28 PM, jim 
 jbol...@outlook.commailto:jbol...@outlook.com%3e wrote:

 A more gentlemanly form:

 Elecraft needs to remain competitive in the market.

 They have limited resources to advance the art. Lose focus and they
 fritter the valuable resources and die.

 The other Big 3 do not concern themselves with AM, or for that
 matter, anything short of selling a new radios at kilo-dollars for new
 revisions, which Elecraft can do with upgrades that are little or no cost.

 Elecraft users are the benefactor of their focus.

 They do NOT need to focus resources on AM.

 For us old-timers here, if R.L. Drake focused on AM when they designed
 and released the Drake 1A (targeted for the SSB mode), they would have
 gone the way of Compaq, Commodore, Digital Equipment and others.

 Jim
 W6AIM





 -Original Message-
 From: Grant Youngman [mailto:n...@tx.rr.com]
 Sent: Monday, March 23, 2015 2:14 PM
 To: jim
 Cc: Elecraft Reflector
 Subject: Re: [Elecraft] K3 AM Performance

 Is it not possible to have a rational discussion on this list without
 this sort of 

Re: [Elecraft] K3: Sherwood Receiver Test Data question

[Joe Moffatt]

I can't compare against a K3, but I can against a Flex5000a and a Flex 6300, 
and this Rx is quieter and smoother at weak signals.I am a computer junkie 
by trade and I really can't stand the SmartSDR interface for the 6000 series 
Flex's.  I have had a Flex for 2.5 years and I decided it was time for a well 
designed small knobbed radio.   I added an Afedri SDR as a panadapter and I 
have the best of both worlds.   No loss of computer features and gained the K3.

Joe


 Original message 
From: David Bunte dpbu...@gmail.com
Date: 03/08/2015 8:19 AM (GMT-07:00)
To: Barry w...@comcast.net
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3: Sherwood Receiver Test Data question

Barry -

It will be interesting to hear from someone who has done that... but I put
two new synth boards in the K3 of W9FAM, and he is THRILLED at being able
to run QRQ without having to be in the QRQ mode, thus being able to use
RIT, without degradation of the CW his K3 is putting out.

For him that is important every moment he is on the air... He realizes he
may never be aware of receive improvement, but knows the upgrade was well
worth it.

In my case, I seldom go over 30 wpm, so I did not need the upgrade the way
he did, but I am still glad I did it. I may never know how differently my
rig actually performs, but it seems quieter. I realize that could be
just because I want to justify the upgrade, but I am a very happy camper
regardless.

Dave - K9FN

On Sun, Mar 8, 2015 at 9:23 AM, Barry 
w...@comcast.netmailto:w...@comcast.net wrote:

 All this talk about better numbers is great, but has anyone done a side by
 side comparison of on the air differences? That's what I'd like to hear
 about.
 Barry W2UP



 --
 View this message in context:
 http://elecraft.365791.n2.nabble.com/K3-Sherwood-Receiver-Test-Data-question-tp7599908p7599927.html
 Sent from the Elecraft mailing list archive at Nabble.com.
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to dpbu...@gmail.commailto:dpbu...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net

Total Control Panel 
Loginhttps://asp.reflexion.net/login?domain=selectconnect.net

To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net
From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=3098220802domain=selectconnect.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3098220802domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3098220802domain=selectconnect.net
 this sender enterprise-wide
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3098220802domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3098220802domain=selectconnect.net
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3: Sherwood Receiver Test Data question

[Joe Moffatt]

I can't speak to what the old was like.   I just got my K3 built a few days ago 
and it is brand new with the new board.

I had a Flex-5000a and a 6300 I have access too.   I am an avid DXer with very 
marginal antennas.   Last night in the CWT, I hit my highest rate ever and I am 
blown away with this receiver.   The sound and feel is incredible.   I have 
never had a radio this good.  It is hard to.describe, but it is amazing.

73 to all,

Joe


 Original message 
From: Wayne Burdick n...@elecraft.com
Date: 03/04/2015 11:46 PM (GMT-06:00)
To: r...@aol.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3: Sherwood Receiver Test Data question

Dick,

The sensitivity number is incorrect because the K3 Rob tested didn't have its 
S-meter and AGC calibrated. He's going to re-test this after the unit is 
calibrated. We tested a few K3s with new synths in our lab, and all of them had 
sensitivity very close to the first K3 Rob tested.

On the contrary, the new synth reduces noise considerably over the old (as much 
as 20 dB lower noise at a 2-kHz offset), which only benefit all measurements.

73,
Wayne
N6KR


On Mar 4, 2015, at 8:56 PM, Dick via Elecraft 
elecraft@mailman.qth.netmailto:elecraft@mailman.qth.net wrote:


 Please advise if I am reading the new Sherwood receiver data correctly:

 1) it shows a nice 6-8dB improvement in 3rd order dynamic range after
 adding the new synthesizer?

 2) it shows that the K3's sensitivity has been greatly reduced from the
 original 0.33  0.19 to 0.8  0.5 after the addition of the new synthesizer?
 If this is true, this would be bad news for weak signal 6  10-m.
 reception.

 73,
 Dick- K9OM
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to n...@elecraft.commailto:n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@selectconnect.netmailto:j...@selectconnect.net

Total Control Panel 
Loginhttps://asp.reflexion.net/login?domain=selectconnect.net

To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net
From: 
elecraft-boun...@mailman.qth.nethttps://asp.reflexion.net/address-properties?aID=3098220802domain=selectconnect.net

Message Score: 1High (60): Pass
My Spam Blocking Level: Medium  Medium (75): Pass
Low (90): Pass
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3098220802domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3098220802domain=selectconnect.net
 this sender enterprise-wide
Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3098220802domain=selectconnect.net
 mailman.qth.net / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3098220802domain=selectconnect.net
 mailman.qth.net enterprise-wide


This message was delivered because the content filter score did not exceed your 
filter level.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Headphone output gone K3

[Joe Moffatt]

Very much a newbie here.   Brand new build.My headphone output is suddenly 
gone. Front or back.  Speakers plus phone enabled in config.It was working 
but no longer.

Any ideas?

Joe
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New K3 build, LOW LOW sensitivity.

[Joe Moffatt]

Ok, checked the RX ANT switch.   It was not on.  I did connect an antenna to 
the RX ANT jack and switched to it, but no difference.

Not sure what is wrong where.   In any case, there is very little sensitivity 
in the K3 at this point.

Don't know what to check.  I have gone back through the best I can... seems 
everything was done correctly.

Very careful about ESD.

Joe



From: Wayne Burdick [mailto:n...@elecraft.com]
Sent: Sunday, March 1, 2015 12:38 PM
To: Joe Moffatt
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] New K3 build, LOW LOW sensitivity.

Joe,

Do you have a KXV3 module installed? You may be switched to the RX antenna.

Wayne
N6KR

On Mar 1, 2015, at 7:48 AM, joemoffatt 
j...@selectconnect.netmailto:j...@selectconnect.net%3e wrote:

 Everything in the manual checked out ok. I am at the stage before putting in
 the 100 watt PA. Just checking things out. I have the IF Out board, but
 that's about it. No ATU. Setup filters, etc. But, I have only about S1
 on the S Meter, and can only weakly hear the strongest of signals. Even WWV
 is poor. This is on a known good antenna/coax.

 Anyhow, just wondering what to check. I haven't set the REF OSC yet because
 I can't get a strong enough signal to do it.

 Ideas? I thought I was sailing along smoothly.

 Thanks,

 joe





 --
 View this message in context: 
 http://elecraft.365791.n2.nabble.com/New-K3-build-LOW-LOW-sensitivity-tp7599593.html
 Sent from the Elecraft mailing list archive at Nabble.com.
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to n...@elecraft.commailto:n...@elecraft.com



Total Control Panel

Loginhttps://asp.reflexion.net/login?domain=selectconnect.net


To: 
j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net

From: 
n...@elecraft.comhttps://asp.reflexion.net/address-properties?aID=3098371613domain=selectconnect.net


Message Score: 1

High (60): Pass

My Spam Blocking Level: Medium

Medium (75): Pass


Low (90): Pass

Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3098371613domain=selectconnect.net
 this sender / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3098371613domain=selectconnect.net
 this sender enterprise-wide

Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3098371613domain=selectconnect.net
 elecraft.com / 
Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3098371613domain=selectconnect.net
 elecraft.com enterprise-wide



This message was delivered because the content filter score did not exceed your 
filter level.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] FIXED IT! RE: New K3 build, LOW LOW sensitivity.

[Joe Moffatt]

I found it!  I went back and saw a bent pin on the KXV3 and took those boards 
including IO out and reseated and all is well!

Thanks!

Joe



From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W0MU Mike 
Fatchett
Sent: Sunday, March 1, 2015 4:52 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] New K3 build, LOW LOW sensitivity.

Check all the coaxial cables that plug into the boards and front panel.
Make sure they go the right places. I would also check the way you have
decided to handle the coax going to the coax chassis connector SO239.
There are a couple of ways to do this depending on your options.

Mike W0MU

On 3/1/2015 3:45 PM, Joe Moffatt wrote:
 Ok, checked the RX ANT switch. It was not on. I did connect an antenna to the 
 RX ANT jack and switched to it, but no difference.

 Not sure what is wrong where. In any case, there is very little sensitivity 
 in the K3 at this point.

 Don't know what to check. I have gone back through the best I can... seems 
 everything was done correctly.

 Very careful about ESD.

 Joe



 From: Wayne Burdick [mailto:n...@elecraft.com]
 Sent: Sunday, March 1, 2015 12:38 PM
 To: Joe Moffatt
 Cc: elecraft@mailman.qth.netmailto:elecraft@mailman.qth.net
 Subject: Re: [Elecraft] New K3 build, LOW LOW sensitivity.

 Joe,

 Do you have a KXV3 module installed? You may be switched to the RX antenna.

 Wayne
 N6KR

 On Mar 1, 2015, at 7:48 AM, joemoffatt 
 j...@selectconnect.netmailto:j...@selectconnect.net%3emailto:j...@selectconnect.net%3emailto:j...@selectconnect.net%3e%3e
  wrote:

 Everything in the manual checked out ok. I am at the stage before putting in
 the 100 watt PA. Just checking things out. I have the IF Out board, but
 that's about it. No ATU. Setup filters, etc. But, I have only about S1
 on the S Meter, and can only weakly hear the strongest of signals. Even WWV
 is poor. This is on a known good antenna/coax.

 Anyhow, just wondering what to check. I haven't set the REF OSC yet because
 I can't get a strong enough signal to do it.

 Ideas? I thought I was sailing along smoothly.

 Thanks,

 joe





 --
 View this message in context: 
 http://elecraft.365791.n2.nabble.com/New-K3-build-LOW-LOW-sensitivity-tp7599593.html
 Sent from the Elecraft mailing list archive at Nabble.com.
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to 
 n...@elecraft.commailto:n...@elecraft.commailto:n...@elecraft.commailto:n...@elecraft.com%3e

 
 Total Control Panel

 Loginhttps://asp.reflexion.net/login?domain=selectconnect.nethttps://asp.reflexion.net/login?domain=selectconnect.net%3e


 To: 
 j...@selectconnect.netmailto:j...@selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.nethttps://asp.reflexion.net/address-properties?aID=750607761domain=selectconnect.net%3e

 From: 
 n...@elecraft.commailto:n...@elecraft.comhttps://asp.reflexion.net/address-properties?aID=3098371613domain=selectconnect.nethttps://asp.reflexion.net/address-properties?aID=3098371613domain=selectconnect.net%3e


 Message Score: 1

 High (60): Pass

 My Spam Blocking Level: Medium

 Medium (75): Pass


 Low (90): Pass

 Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3098371613domain=selectconnect.nethttps://asp.reflexion.net/FooterAction?ver=2bl-sender-address=1rID=750607761aID=3098371613domain=selectconnect.net%3e
  this sender / 
 Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3098371613domain=selectconnect.nethttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-address=1rID=750607761aID=3098371613domain=selectconnect.net%3e
  this sender enterprise-wide

 Blockhttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3098371613domain=selectconnect.nethttps://asp.reflexion.net/FooterAction?ver=2bl-sender-domain=1rID=750607761aID=3098371613domain=selectconnect.net%3e
  elecraft.com / 
 Blockhttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3098371613domain=selectconnect.nethttps://asp.reflexion.net/FooterAction?ver=2ent=1bl-sender-domain=1rID=750607761aID=3098371613domain=selectconnect.net%3e
  elecraft.com enterprise-wide



 This message was delivered because the content filter score did not exceed 
 your filter level.



 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message