Thank you!!
Sent from my iPod
निल
> On Sep 6, 2023, at 8:42 AM, Mike Dodd wrote:
>
> On 9/6/2023 11:31 AM, Neil Smith wrote:
>> Hi guys,
>> It sounds like there might be a KX* specific thread for Elecraft products.
>> As a KX2 owner I’d be interested in joinin
Hi guys,
It sounds like there might be a KX* specific thread for Elecraft products. As
a KX2 owner I’d be interested in joining that.
Can someone send me the link to sign up over there?
Many thanks & 73,
Neil - K6KWI
__
Elec
I recently noticed my KX2 frequency read out has 2 numerals to the right of the
. (Dot). I seem to recall there being 3 numerals. But since pushing RATE to
speed thru the band only two numbers show.
Example: 14.280.12x
Anyone know how to restore the missing numeral - x?
Thanks & 73,
Eric,
now that it looks the K4-F is finally on a production schedule, any
hints on when there will be a K4-K ??
Thanks,
Neil, KN3ILZ
On 4/13/2023 3:18 PM, Eric Swartz wrote:
Hi Rick,
It looks like your K4D shipped today. :-)
We're also working hard to ship a lot this week and next so we
. $650. shipped to
the lower 48. Contact me off line at **n4fn "at"arrl.net
<http://arrl.net/>or by phone 770-321-9348*
*Neil Foster N4FN*
*
*
--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/l
aids. GRADO makes expensive professional phones as well. However
the basic ones are excellent. I have had them for years. In fact I gave a
gift of a pair to a friend who has excellent hearing and he said the
clarity was excellent. Neil N4FN
Even that is overkill. I use a $15 Sabrent soundcard from Amazon with
my KX3.
Neil, KN3ILZ
On 8/20/2022 9:45 AM, 7MYM BD wrote:
Yes, the kx3 only needs a suitable USB sound card to use, such as
If you need an external box, you can consider riglink or digilink nano.
发送自我的盖乐世
原
You really don't need a Signalink to do digital modes and the KX3. All
you need is a good USB sound card, the audio cables for Tx & Rx
(Stereo), and the KXUSB cable for CAT control.
The setup is described in Cady's KX3 book.
Neil, KN3ILZ
On 8/15/2022 6:10 PM, k2vjk wrote:
I ca
arked J67a
and J67B and the component is marked C241.
I am trying to figure out what this module is and how it was used. It came
with the KPod but I am not sure it has any bearing. My radio is a K3s
Many thanksNeil N4FN
__
Elecraft mailing
Posting for a friend, please contact Tom directly, not me Tom is selling
for a SK friend of ours
*Elecraft KFL3-250 Cycle CW Filter $85 Delivered**
** Tom Harrell N4XP (706) 340-4229**
**t...@stharrell.com*
--
__
a recorded message in the DVR. Any clues are appreciated. Stay
well all and those in the US have a great Thanksgiving. Neil N4FN
--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
160m with RX antenna switch*
*KNB2 Noise Blanker*
*KAT2ATU*
*KIO2RS232*
*K2 Fixed Audio output for digital*
*N0SS Amp Relay*
Replacement value is about $1,800. Shipped insured with all manuals and
docs to Con-US for $925.00
Photos are available Neil N4FN770-321-9348
of my main power supply.
Amazon has them, but I think that they were cheaper from guitar center.
Neil
Sent from my iPhone
> On Apr 27, 2021, at 3:36 PM, Raymond Sills via Elecraft
> wrote:
>
> I'd still prefer the Mackie Mix5.Same price, 1-day free shipping... more
Is anyone using a K3 or K3s with the K1EL K44 CW Keyboard unit?.Many
thanks and all stay wellNeil N4FN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Just checked with WSJT-X v2.3.1 (and v2.4.0-RC4 beta), they both have
the latest Hamlib updates, and the K4 is listed.
Neil, KN3ILZ
On 4/7/2021 2:49 PM, Paul Van Dyke wrote:
Andy
Yes, but Before I left on my business trip the K4 designation was not
there yet. But it worked fine with a K3S
My badI thought I had checked my post and I realized I was not
clear. I still have my K3s and P3 station along with the KPA-1500. The
"S" box interlaces all the radios, K3s and KPA1500 along with the
SteppIR.. So let me clarify...
TNX
N
, it will probably have its foibles
and issues that will need to be worked out.
Keep on keeping on !! :)
Neil, KN3ILZ
On 3/31/2021 8:33 PM, Wayne Burdick wrote:
Greetings from the mothership.
Q: Are Eric and I keeping up with the K4 megathreads on the forums?
A: You bet.
But we're not weighing in as often
Well Bob would have to be titled an EXALTED WIZARD.
If you are not familiar with his units and have multiple radios his box
works like a charm, check them out. Thanks Bob, you done good!!
Neil N4FN
__
Elecraft mailing list
Home: http://mai
I have been in touch with Dave at Radio World UK and he has informed me
they do _*NOT*_ have the Nifty K2 manual
Neil N4FN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Hi Mick,
there was no link to any site for this. Could you copy and paste ?
Thanks,
Neil, KN3ILZ
On 1/4/2021 1:07 PM, Mick Hall wrote:
These are still available new in the UK at Elecraft K2 Plus Options Nifty Mini
Manual
|
|
|
| | |
|
|
|
| |
Elecraft K2 Plus Options Nifty Mini
The one question I didn't see asked was you have the rig in DATA-A mode,
right?
Neil, KN3ILZ
On 12/1/2020 7:04 AM, Mark Moeller wrote:
I am working to get my KX2 setup for FT8 and appreciate any help.
My setup includes: KX2 connected to a G5RV antenna, Windows 10 laptop, USB
Sound Card, Mic
Of course, as mentioned previously in this thread, large companies have
funds that they can invest in personnel to do the development, so I
would expect that Kenwood would be able to assign personnel quickly to
handle such issues.
Neil, KN3ILZ
On 11/25/2020 10:25 AM, Andy Durbin wrote:
"
Hello all,
I'm looking for a 10 MHz reference board to the K3S. If anyone has one,
with all the necessary hardware, please contact me.
Thanks!
Neil Ramhorst
KL7JGS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
FYI: the Elecraft website also has PDF versions of the K4 manual that
you can print right now.
Neil, KN3ILZ
On 10/8/2020 3:54 PM, Nigel Lemaire wrote:
I kind of like that the K4 has a built in manual, which is no doubt
updated as required AUTOMATICALLY.
Is there a provision to print out
Best to save a HEAP of pennies, Dollars and Euros, Ian!...Neil N4FN
I am just curious about the estimated cost difference between the factory
version and the kits. I want to start putting aside my pennies now, and
want to have a somewhat reasonable target.
I hope for everyone
, just a set of stereo
cables, and a USB soundcard.
Neil, KN3ILZ
On 10/4/2020 2:07 PM, Terry Brown wrote:
I have a KX3 which connects to a signalink that connects to my computer for
digital modes.
I have not owned a K3(S). I assume the K4 has an internal sound card to take
the place
the OK button, and then close the Sound Control Panel. I'd do a
restart to make sure that Windows has saved that info. Then open
WSJT-X and select them on the Audio setting tab.
Most of the users who have done this have not see the 'scrambled audio
device' issue again.
Neil, KN3ILZ
On 9/12
DXLab's DX Commander works fine with the K2, and integrates well with
DXKeeper log program, along with the rest of the DXLabs suite.
I use Commander with the K2 to run WSJT-X modes with Commander as the rig.
Neil, KN3ILZ
On 8/26/2020 3:15 PM, Dave Van Wallaghen wrote:
Hey Denny,
I use
Albin,
Elecraft does have these relays. I had to replace one in my K2, and I
ordered via the website.
Neil, KN3ILZ
On 8/24/2020 10:35 AM, Albin Stigö wrote:
Hi,
I'm in the process of repairing a K2 I've inherited from Clemed SM6DRH
who sadly passed away earlier this year at age 90
I'm assuming that all the Zoom presentations will be available, since
I'm assuming that people like me won't be able to view some of them
live. I'm very interested in the Classic Line presentation, along with
the K4 presentation.
Thanks,
Neil, KN3ILZ
On 8/7/2020 1:08 PM, Wayne Burdick wrote
lp you with an authorized PDF version
Neil, KN3ILZ
On 7/6/2020 5:02 PM, Wes wrote:
Stopping after your first sentence would have been a good idea.
Wes N7WS
On 7/6/2020 1:56 PM, Keith N6JPA wrote:
You can buy it from the nifty manual web site. I don't think this
list should be used to pirate copies of m
Probably not .. but you can get CAT6 cable (which will work with CAT5
connections) at Amazon at various cable lengths if you don't have one
lying around.
https://tinyurl.com/ycrsycwg
Neil, KN3ILZ
On 6/15/2020 11:12 AM, Joseph Trombino, Jr wrote:
Howdy Gang.
Does anyone know if the K4
Sorry for the confusion ... wasn't thinking when I typed out the subject
line. Thinking KAT100 typed KPA100, then sent it :(
Neil, KN3ILZ
On 6/4/2020 3:32 AM, Neil Zampella wrote:
Hi all,
I saw that the K2 100w tuner accessory, the KAT100 is no longer
available and discontinued. I'm
Hi all,
I saw that the K2 100w tuner accessory, the KAT100 is no longer
available and discontinued. I'm guessing its due to the permanent
unavailability of a through part. I'm wondering if Wayne or Eric
could comment on this, and if there's any suitable replacement for that
tuner?
Neil
...@mailman.qth.net
Neil, KN3ILZ
On 5/16/2020 6:40 PM, Weston Doucet wrote:
Unsubscribe
Get Outlook for iOS<https://aka.ms/o0ukef>
From: elecraft-boun...@mailman.qth.net on behalf
of elecraft-requ...@mailman.qth.net
Sent: Saturday, May 16, 2020 11:11:01 AM
To: el
Wayne,
quick question ... I am giving very serious consideration to a K4, but
the kit version. Assuming the new timeline on the factory version
works out, should we expect a kit by Sept 2021?
Thanks,
Neil, KN3ILZ
On 5/16/2020 1:15 PM, Wayne Burdick wrote:
Mike,
K4HDs will take longer. We
I still wonder why Elecraft a forward looking company uses a "reflector"
like mailman rather than the .io type so many others now use. Sure makes it
easier to navigate using .io
Neil N4FN
__
Elecraft mailing list
.
Neil, KN3ILZ
On 3/7/2020 3:46 PM, Jim Brown wrote:
On 3/7/2020 11:15 AM, Alan wrote:
Just as we were ready to go into production the part was
discontinued. I had to scramble to figure out some other means to
perform the function (which meant a PC board turn).
Yes, and for Elecraft, that's
in my bookkeeping role.
Neil, KN3ILZ
On 2/27/2020 2:56 PM, Jim Brown wrote:
On 2/27/2020 8:25 AM, Alan Bee via Elecraft wrote:
For plain text sharing and editing documents is fine in a varietyof
word processing apps. However when it becomes a table, and more so
withembedded graphics then the file
FWIW .. he's looking for a K3 cable .. DX Engineering only carries the
KXUSB cable for the KX3.
Neil KN3ILZ
On 1/25/2020 7:00 PM, Dave wrote:
I ordered my KXUSB-A cable from DX Engineering. Closer to me, faster shipping.
I see you have a 6 area call. If you are in CA then ordering from
Ok, thanks.
On Sun, Jan 12, 2020 at 1:55 PM Don Wilhelm wrote:
> Neil,
>
> Sorry, but that setting is not saved over a power cycle.
> It is good to hear the Fixed Audio Output is serving you well.
>
> 73,
> Don W3FPR
>
> On 1/12/2020 1:31 PM, Neil Foster wrote:
>
down and later come back the setting does not stay at ALC but reverts
to RF. Is there a way to have it stay in ALC display?
Many thanks
Neil N4FN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
a West
Mountain fan.
73 es gud dx
NeilN4FN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Commander.WSJT-X is has Commander set as the rig.
Works great for under $35.00, cost of audio cables, soundcard, and USB
serial adapter (FTDI chip).
Neil, KN3ILZ
On 1/6/2020 4:03 AM, Neil wrote:
I have recently added to my K2 the Fixed Audio Output kit that Dave
W8FGU now has made available.
I
I have recently added to my K2 the Fixed Audio Output kit that Dave
W8FGU now has made available.
I wonder if any K2 user has used the K2 with either a Signal Link or the
Rig blaster Advantage. I would appreciate any feedback.
Thanks
Neil N4FN
ing Windows 7.
Hope this helps,
Neil, KN3ILZ
On 12/27/2019 7:36 AM, Steve & Anne Ray wrote:
I have been using Dan's excellent K2S software for my K2 with Windows 7 for
a number of years. I recently upgraded my computer to Windows 10. Now
when I load K2S I get the following error message.
Don,
I installed the 12pF cap as suggested didn't help, so I'm going to
request a replacement Q19.
Thanks,
Neil, KN3ILZ
On 12/25/2019 3:24 PM, Neil Zampella wrote:
Don,
Thanks, I'll work on that tomorrow and let you know how it goes.
Merry Christmas!!
Neil
On 12/25/2019 11:19 AM, Don
Don,
Thanks, I'll work on that tomorrow and let you know how it goes.
Merry Christmas!!
Neil
On 12/25/2019 11:19 AM, Don Wilhelm wrote:
Neil,
Your readings on the PLL range test show that Q19 is marginal. Q19 is
not oscillating properly at the high end of the PLL range.
The first thing
, so I can't put things on a scope, etc. Any hints
would be appreciated, I can say I'm very sure I did not put any of the
ICs in backwards, I learned that the hard way when building my K2/100.
Merry Christmas to all, and a Happy New Year.
Neil, KN3ILZ
.
The fix is obvious, but you don't realize its needed until you reach the
step where you're putting the three boards together.
Hope this helps others before they reach that step.
Neil, KN3ILZ
__
Elecraft mailing list
Home: http
I purchased a serial to USB adapter from Amazon that had the FTDI
chipset, and have had no problems with CAT control to the rig. I've
added a link to Amazon for that adapter, its only $12 but it works well.
https://www.amazon.com/gp/product/B00BUZ0K68/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8=1
What's the Serial Number?
On 11/13/2019 3:50 PM, Tomy Ivan wrote:
I have a very nice working K2-100, 160 - 10 meters, Serial 57xx
Has the following:
Upgraded Metal tuning knob with dimple.
KAT2 Automatic Antenna Tuner
KSB2 SSB Adapter
K160RX 160 Meter Adapter with RX Antenna Switch
KPA100 100
Thanks Eric,
I was not aware of the web site
Even Better:
Nabble.com: elecraft Searchable Daily Web Archive (view by date or discussion
thread and reply to postings.)<http://elecraft.365791.n2.nabble.com/>
http://elecraft.365791.n2.nabble.com/
Neil
thru many messages that a user may
not have an interest in, and hunting to find those of interest. Using
the .IO all one needs to do is click on the item and it is there. Just
one "geezers" take on the issue.
73
Neil N4FN
_
FWIW .. this question is for Wayne or Eric, could the K60XV be
redesigned using currently available components, or perhaps something
that would allow easy use of the transverters?
Neil, KN3ILZ
---
This email has been checked for viruses by AVG.
https://www.avg.com
I am looking for a basic K2 for QRP with the basic add-ons like SSB,
NB...I do not need the tuner
Neil N4FNn...@arrl.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Thanks to all who sent advice ... Don (as usual) steered me in the
right direction.
I need to replace the K1 relay as I accidentally touched it when
removing the RF Board C6 capacitor for the K60XV installation. Didn't
think much at the time, but definitely bit me in the tail here.
Neil
Don,
I don't see 60M working either. I'll check these tomorrow after work.
Neil
On 8/5/2019 2:20 PM, Don Wilhelm wrote:
Neil,
Does 60 meters work, but not 40 meters?
The only things that could 40 meters to fail after installing the
K60XV are:
1) C6 is not the correct 4.7 pF value
,
Neil, KN3ILZ
---
This email has been checked for viruses by AVG.
https://www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
with the
bias.
As far as the speaker, I would rather not have to listen to the
cacophony of tones using WSJT-X modes, but if you need to hear it, you
can usually run the a USB soundcard's line-in through your computer
speaker or headphone jack.
Neil, KN3ILZ
On 6/9/2019 11:25 PM, Nr4c wrote:
Yes
pers or
adding capacitors.
Neil, KN3ILZ
On 6/8/2019 1:47 PM, Terry Basom wrote:
The SLMODKX3 jumper module for using the Signalink USB with a KX3 or KX2,
has a DC blocking capacitor built in.
Can anyone tell me where it is in the circuit and a value? It eliminates
turning off the mike bias in the
when it
is so easy to pick up the phone and talk to a real and intelligent
person in the US.
Anywaymy two centsElecraft has top notch service....got me sold!
NeilN4FN
--
__
Elecraft mailing list
Home: http://mailman.qth.
Rich,
I'm using it with my K2 and it has given me no problems whatsoever.
The only issues is that Windows will sometimes arbitrarily change the
sound card settings in WSJT-X. That stopped when I plugged the dongle
into a powered USB hub connected to my shack laptop.
Neil, KN3ILZ
On 5/22
The only problem is this configuration uses a Signalink, which is really
not needed with a KX2 or KX3. A cheap Sabrent sound dongle ($15 or
less) from Amazon works great, and keeps the computer sounds separate
from the WSJT-X audio output. CAT control would be through the KXUSB
cable.
Neil
PMMail ... dost thou be an old OS/2 user ?? :)
Neil, KN3ILZ
On 5/21/2019 4:23 PM, Jim Brown wrote:
On 5/21/2019 12:25 PM, Neil wrote:
It is a pity that the present format of the reflector does not allow
a person to mouse click on a
particular post so that one does not have to scroll thru
It is a pity that the present format of the reflector does not allow a
person to mouse click on a
particular post so that one does not have to scroll thru spots that may
not be of interest. Other
reflector formats allow this. Perhaps an update is needed?
Neil N4FN
All I want to know ... when can I put down a deposit for the kit :)
Neil, KN3ILZ
On 5/16/2019 4:35 PM, Wayne Burdick wrote:
It’ll all be on our website tomorrow.
Not your grandpa’s SDR :)
73,
Wayne
N6KR
elecraft.com
---
This email has been checked for viruses by AVG.
https
FWIW ... I use DXLab's DX Commander with my K2, and have full CAT
control. Not using a Rigblaster, but connecting through the RS-232
cable, CAT works fine. I've worked a DXPedition using this setup, and
the Fox/Hound mode worked perfectly.
Neil, KN3ILZ
On 5/14/2019 1:39 PM, Phil Kane wrote
remotely using VNC.
Neil, KN3ILZ
On 4/24/2019 11:02 PM, Phil Kane wrote:
Problem (described below) with the WSJTX program (the "home" of FT8)
trying to access K2. I didn't get an answer on the WSJTX Yahoo group so
I'll try here.
Configuration:
Dell Laptop PC with iMic and RigBl
Since my radios are not Elecraft, I use them to switch the amp between the
FLEX 64500 and the Yaesu FTdx5000
Neil N4FN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
I need to change from a digest version of the list ... :(
Neil, KN3ILZ
On 4/15/2019 1:41 PM, EricJ wrote:
Free Rework Eliminator "sold" in 5 minutes. Free really works!
Eric KE6US
---
This email has been checked for viruses by AVG.
https://w
ogram. If you could incorporate
GPL-covered software into a nonfree system, it would have the effect of
making the GPL-covered software nonfree too."
So in reality, unless the firmware is then made available under the GPL
v3, which I don't see Elecraft doing, you can't use FT8 in the firmw
AC causing
several long time DXAC members to resign. You would have thought they would
have learned after the JA stilt operation years ago that was initially OK
and then deleted. Maybe the folks at the League will learn, but I doubt it.
My two cents. And I love the KPA1500!
N
I’m gearing up for grid squares this summer. I’m thinking of purchasing a
KPA 500 amplifier. Does anyone have experience running one of them on the
dual configuration of Honda EU 2000 generator‘s?
Neil
--
Neil Ramhorst KL7JGS
P.O. Box 4424
Bozeman, MT 59772-4424
406-581-1575
and alignment.
I can send a complete list and photographs.
Paid 3400.00 and will sell for 2400.00. Do not want to split up.
I'm looking to purchase a KPA500 and KAT500. If someone has one will
consider trade.
Neil kl7jgsatgmail.com
trying to figure out the problem poring over the troubleshooting steps,
emails to Don, and magnified visual checks against the part location
diagrams. I never did see that error and sent the rig to Elecraft,
where it was noticed and replaced.
73,
Neil, KN3ILZ
On 1/22/2019 9:57 PM, K2bew wrote:
Don
else said, a K1 and KX1 may bring close to original pricing
or more.
Neil, KN3ILZ
On 1/3/2019 3:09 PM, Michael Bower wrote:
Hi, gang,
We are in the process of downsizing for a future (not scheduled). Can
anyone give me suggestions for prices on the below rigs if I decide to sell
them instead
FWIW .. I just run the Raspbean .deb of WSJT-X v2.0, the KXUSB for CAT
control, and a cheap USB soundcard with my KX3. The hat does me no
good, as I'd have to find an adapter cable to use the DIN connectors.
The USB soundcard just cost me $9.00 or so.
Neil, KN3ILZ
On 1/2/2019 7:42 PM
it takes to make the contact.
Neil, KN3ILZ
On 1/2/2019 5:56 PM, Carl J. Denbow wrote:
While it's legal to run maximum power on FT8, or any other weak signal
mode, it's certainly not in the spirit of the weak signal mode ethos
Most weak-signal mode enthusiasts pride themselves on the worldwide
As long as the developer is using any part of the WSJT-X code it cannot
be added to closed source firmware. It doesn't matter that it can be
done.
It would be in violation of the GPL
Neil, KN3ILZ
On 12/30/2018 8:59 PM, John Harper wrote:
Here's the thread - scroll down to message #27527
FWIW .. I've got my K2/100 running FT8 right now ... just in time for
the next RTTY contest where its a new mode :)
Neil, KN3ILZ
K2/100 SN: 7788
KX3 SN: 6596
On 12/29/2018 7:05 PM, Phil Kane wrote:
On 12/29/2018 12:14 PM, W2xj wrote:
It is just that too many do not seem to have fully
reat if they could release a PDF of the engineering
drawings of the EC2, so that those who wanted to create a KAT100-2 could
still do that.
Neil, KN3iLZ
On 12/22/2018 11:42 PM, Josh Fiden wrote:
To the original point, there is no difficulty finding a different vendor, there
are no tooling c
.
The KAT100 is a great option, and is designed to sit below the K2/100.
If you need pictures, you can check out my K2 build pics here:
http://nz1951.com/2-uncategorised/2-elecraft-k2-build
Neil, KN3ILZ
On 12/19/2018 5:18 PM, Gene O wrote:
I should have first stated that I do not have any K2 or any
FWIW ... easier said than done, there's a lot more to it than there is
to CW, RTTY, or even PSK.
Neil, KN3ILZ
On 12/19/2018 9:44 AM, Andy McMullin wrote:
I’d vote for that idea too!
Regards
Andy, G8TQH
On 19 Dec 2018, at 14:36, Bob N3MNT wrote:
Maybe add WSJT-X capability to PX3
It went QRT in April when it returned to Hawaii. If they send it
out again, it'll probably run 2.0 :)
Neil, KN3ILZ
On 12/18/2018 5:02 PM, Bob N3MNT wrote:
How about KH6JF/MM?
Is KH6JF/MM running 2.0 or 1.9 ?
--
Sent from: http://elecraft.365791.n2.nabble.com/
---
This email has
I'm NOT interested in selling individual items at this time.
I'm looking for one of the following as possible trade either partial or
direct:
K3S or KPA500 and tuner.
Please no other radios or manufactures.
Email me for more information or photographs.
My call at gmail.com
on options
enter your subscription email address: "
http://mailman.qth.net/mailman/listinfo/elecraft
Neil, KN3ILZ
On 12/2/2018 10:06 PM, John Pierce wrote:
I signed up for the digest, daily. I am not receiving it. I cannot find
out how to resign up on your current site.
Jo
Mike,
the reflector includes attachments to the digest (if that's how you get
it), you just find the attachment with the post you want to reply to,
double click on it, it 'should' open as another email. You then click
on the reply button... and write your reply.
Does this help?
Neil
A Chromebook will not run the utilities. I'm fairly sure Chromebooks
run on a version of Linux, but you're limiting yourself to a lot of
'cloud based' stuff.
Look at a AMD powered laptop, a bit cheaper than an Intel, but you often
get more bang for the buck.
Neil, KN3ILZ
On 11/30/2018 9
DX all around
the globe.
Neil, KN3ILZ
On 11/23/2018 6:43 PM, Don Wilhelm wrote:
Tom,
Connect the KXUSB cable between your computer and and the KX3 (The
same connections you would use for loading firmware).
Put the COM port number that your computer assigned to the KXUSB into
Hamlib and see
Urp forgot one thing ... if you want to use the digitial application,
you will need standard stereo cables to connect the mic & audio out, to
the computers line in/line out soundcard connections. I used the
cables that come in the KX3-PCKT cable kit ... work great
Neil, KN3ILZ
On 1
Nope .. just the KXUSB cable .. does it all.
On 11/16/2018 9:34 AM, John Pierce wrote:
Is there any special cableing required to use HRD software with a KX3?
John, AD2F
---
This email has been checked for viruses by AVG.
https://www.avg.com
, and Philco sets were among the most
common radios sold through the 1930s and 40s making parts more available . . .
73,
Neil
WA7VHT
On Nov 6, 2018, at 3:45 PM, Dauer, Edward
mailto:eda...@law.du.edu>> wrote:
I attended a performance today by a woman who does a Rosie the Riveter routine
as
SPECIFICALLY, I'd just download v1.9.1 and install it into a
different directory.
You can have both versions on the same computer, they will use the same
log files, .ini, etc.
Neil, KN3ILZ
On 10/30/2018 11:22 AM, Don Butler wrote:
Same intermittent problem here. I finally found
doing exactly that. I would also visit this webpage:
http://www.dxa3.org/vp6d/ which will list the frequencies they're using.
Neil, KN3ILZ
On 10/30/2018 10:25 AM, Carl Yaffey wrote:
I worked them. Like you, I heard many “hounds” and no VP6 for quite a while.
Then suddenly, t
That was a joke ... :)
Neil, KN3ILZ
On 10/3/2018 11:50 PM, David Bunte wrote:
I would not assume that it has anything to do with ICOM supporting the
survey, and more with the fact that there are probably many more ICOM
HF rig owners than Elecraft owners... if that is true then I am a bit
Might have more to do with the fact that ICOM is a supporter/advertiser
on that site .. LOL
Neil, KN3ILZ
On 10/3/2018 11:51 AM, Charlie T wrote:
You know, I'll bet the reason Icom is #1 in this survey is just possibly,
I'm going out on a limb here, they got more votes.
Along the same lines
customer. I basically turned off the Xfinity WiFi, installed a top of
the line Linksys AC-1900 router, and all the ethernet, and wireless
connections go through that, and he's not seen the issue since.
As usual YMMV ... :)
Neil, KN3ILZ
On 10/2/2018 9:04 PM, Mike Greenway wrote:
Well the good news
Jim,
I use PTT with both my K2 and my KX3, its just one additional USB
connection to the PC. The other is to my external USB soundcard which
does audio for both.
Neil, KN3ILZ
On 10/2/2018 4:20 AM, Jim Brown wrote:
On 10/1/2018 10:47 PM, Rick WA6NHC wrote:
While thousands may use VOX
One thing to add ... once you have the CAT control setup properly, you
should change bands via WSJT-X, as it will control the band changes on
the rig, not the reverse.
Neil, KN3ILZ
On 9/12/2018 6:15 PM, Don Wilhelm wrote:
Richard,
You must have communications between WSJT-X and the K3S
1 - 100 of 188 matches
Mail list logo