appreciated.
73
Glenn ON4WIX
K2 s/n 5146
K3 s/n 0192
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Yes it could. It's called waterfall display. Don't know if there's a way
to buffer/log the screen data, though.
73
ON4WIX
- Original Message -
From: John Lemay j...@carltonhouse.eclipse.co.uk
To: 'Richard Wheeler' rich...@wheeler.com; elecraft@mailman.qth.net
Sent: Tuesday, April 05
Hey Paul,
these remind me *a lot* of the Auratone cubes that were omnipresent in the
'80s era studios...
73
Glenn
ON4WIX
- Original Message -
From: pd0psb sailor...@hotmail.com
To: elecraft@mailman.qth.net
Sent: Thursday, October 28, 2010 8:32 PM
Subject: Re: [Elecraft] Nearfield
. I usually
have it placed in the center position so I hear both RXs at equal volume. I
can't remember how I set it up (it was added in an early firmware update)
but I'm sure someone will post the answer here.
73
Glenn ON4WIX / OR4W
- Original Message -
From: W8JI Tom w...@w8ji.com
up some of the confusion.
73 and enjoy your new radio!
Glenn ON4WIX
- Original Message -
From: Mike n...@nf4l.com
To: MeLikeyTacos jose.point...@gmail.com
Cc: elecraft@mailman.qth.net
Sent: Wednesday, March 10, 2010 2:03 PM
Subject: Re: [Elecraft] Serial #4019 is on the air,and I have
Glenn ON4WIX
- Original Message -
From: Hector Padron ad4c2...@yahoo.com
To: elecraft@mailman.qth.net
Sent: Friday, January 15, 2010 9:46 PM
Subject: [Elecraft] Orlando Hamfest K3 hats
Great,then I can pick up a hat with a big K3 in it,I used to have ones for
the big three J brands but I
et bonne chance!
73 de Glenn ON4WIX
- Original Message -
From: f9oj.7 f9o...@wanadoo.fr
To: Elecraft elecraft@mailman.qth.net
Sent: Wednesday, January 13, 2010 2:44 PM
Subject: [Elecraft] do I miss something...?
Hello
I assembled a W2 wattmeter last december, but I had to spend
Sorry, that one sentence should read:
That way I discovered my PCB had one trace with a hairline crack that was
virtually invisible
73
Glenn ON4WIX
- Original Message -
From: ON4WIX on4...@skynet.be
To: f9oj.7 f9o...@wanadoo.fr
Cc: elecraft@mailman.qth.net
Sent: Wednesday, January 13
to put in the
errata sheet?
73
Glenn ON4WIX / OR4W
- Original Message -
From: Dave G4AON elecr...@astromag.co.uk
To: elecraft@mailman.qth.net
Sent: Wednesday, December 02, 2009 6:42 PM
Subject: [Elecraft] K3 other CQWW contest issues
It came as a surprise when a 40m pile up
Hi Lyle,
you're absolutely right. Sorry, my mistake. Comment withdrawn.
73
Glenn ON4WIX / OR4W
- Original Message -
From: Lyle Johnson k...@wavecable.com
To: ON4WIX on4...@skynet.be
Cc: Dave G4AON elecr...@astromag.co.uk; elecraft@mailman.qth.net;
k3supp...@elecraft.com
Sent: Wednesday
The Queen's version of the pronunciation might be something like this:
Elecraft (eleˈcrɑːft).
But then again... ;-)
73
Glenn ON4WIX
- Original Message -
From: Paul ZL3IN ps030...@varion.co.nz
To: elecraft@mailman.qth.net
Sent: Thursday, November 26, 2009 8:50 PM
Subject: Re: [Elecraft
?
:-)
73 de M0XDF, K3 #174
--
Being a System Administrator is like being a plumber.
If you do a good job, nobody knows. If you screw up, everybody gets
covered in s**t!
On 26 Nov 2009, at 20:14, ON4WIX wrote:
The Queen's version of the pronunciation might be something like this:
Elecraft
that a TRS plug is used my guess is that they are stereo
headphones.
73
Glenn ON4WIX
- Original Message -
From: William Carver bcar...@safelink.net
To: Elecraft List elecraft@mailman.qth.net
Sent: Tuesday, September 15, 2009 6:30 PM
Subject: [Elecraft] CM-500 headphones
Dick, are those
Bingo! SubRX NB working at last.
Thanks heaps!
73
Glenn ON4WIX
- Original Message -
From: wayne burdick n...@elecraft.com
To: Elecraft Reflector elecraft@mailman.qth.net
Cc: elecraft...@yahoogroups.com; elecr...@yahoogroups.com
Sent: Wednesday, September 02, 2009 7:59 PM
Subject
Joe,
I've witnessed the same NB phenomenon with my K3 #192. I have posted about
this on this reflector but got very few answers.
Hopefully someone will find out what's causing this behaviour. I would love
to have a working NB in my subreceiver.
73
Glenn ON4WIX
- Original Message
I'll second David's observations about the enclosure quality. I've got
Dave's W1 enclosure here and me's a happy camper!
73
Glenn ON4WIX
- Original Message -
From: David Ferrington, M0XDF m0...@alphadene.co.uk
To: Dave Van Wallaghen w8...@comcast.net
Cc: Elecraft elecraft
pair of cans has its own
volume control. Audio and build quality are good as is the price: I bougt
mine for about 30 Euro (21% sales tax included).
Good luck,
Glenn ON4WIX/OR4W
- Original Message -
From: Brett Howard br...@livecomputers.com
To: Roy Morris w4...@carolina.rr.com
Cc
Don't forget to undo the mods!
73
Glenn ON4WIX
- Original Message -
From: pd0psb p.s.bijp...@gmail.com
To: elecraft@mailman.qth.net
Sent: Tuesday, June 09, 2009 7:12 PM
Subject: Re: [Elecraft] New to the Forum
And go through all the firmware updates, one by one :-)
73
Paul
I support that. Maybe we were getting too intimidating with our
KX1/K1/K2/kits inside jokes.
Enjoy your K3. It's in a league miles above and beyond anything I've ever
owned before.
Glenn ON4WIX
- Original Message -
From: Jim Miller KG0KP jimmil...@stl-online.net
To: elecraft
note K3 Synthesizer
ALC Rev A, dated December 23, 2008?
I would appreciate some info before I start heating up the soldering iron.
Thanks for any info.
73
Glenn ON4WIX / OR4W
__
Elecraft mailing list
Home: http://mailman.qth.net
- Original Message -
From: Greg - AB7R a...@cablespeed.com
To: elecraft@mailman.qth.net; 'ON4WIX' on4...@skynet.be
Sent: Wednesday, June 03, 2009 8:32 PM
Subject: Re: [Elecraft] [K3] - KRX3 not working on 12/10
More than likely you have the antenna selection set to something you do
Hi Greg,
you just made my day. I have warned many owners about this problem but in
the meantime I must have forgotten about the sub RX antenna selection issue.
As I have not operated on 12/10 since installing the sub RX it was an easy
oversight. Many thanks, all is fine now!
73
Glenn ON4WIX
Mine is s/n 192, received it as a kit in January 2008. No problem here.
73
Glenn ON4WIX
- Original Message -
From: Joe Subich, W4TV li...@subich.com
To: d...@w3fpr.com; elecraft@mailman.qth.net
Sent: Friday, April 17, 2009 4:24 PM
Subject: Re: [Elecraft] K3 New fw loader
Don
in the manual or can this be reproduced by other users?
Thanks for any help.
73
Glenn ON4WIX
K2/100 #5361
K3/100 #192
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
FWIW: I just loaded F/W 2.78. NB works FB on both main and sub receivers.
Must be a firmware bug in 3.06 then...
Anyone who can duplicate this?
73
Glenn ON4WIX
- Original Message -
From: ON4WIX on4...@skynet.be
To: elecraft@mailman.qth.net
Sent: Monday, April 06, 2009 5:00 PM
Subject
memories).
Works like a charm, especially with the four in band memories M1-M4 which
you can use to store different frequencies modes within each band.
Try it, I'm sure you'll like it.
73 es GL
Glenn ON4WIX
- Original Message -
From: W6NEK w6...@socal.rr.com
To: 'Elecraft Reflector
on
after programming your quick memories would be nice to prevent this from
happening. Or maybe I should just engage my brain before hitting the keypad,
hi.
Enjoy your Sunday everyone!
73
Glenn ON4WIX
- Original Message -
From: Erik N Basilier ebasil...@cox.net
To: d...@w3fpr.com
Actually the Kenwood TS-570 had such a scheme implemented. Whenever one
would press the mode button one would get some CW feedback and I've never
been confused by that feedback. Signalling for high SWR was both on-screen
and by an SWR message in CW.
73
Glenn ON4WIX
- Original Message
hope it makes it to the top of the list soon
;-).
Anyway, I had a great time during the contest and my K3 amazes me more
everyday. This is one heck of a radio!
Thanks all at Elecraft!
73
Glenn ON4WIX / OR4W
___
Elecraft mailing list
Post
As long as it doesn't come as a knit ;-)
73
Glenn ON4WIX
- Original Message -
From: Simon (HB9DRV) si...@hb9drv.ch
To: wayne burdick n...@elecraft.com; JIM DAVIS nn...@astound.net
Cc: elecraft@mailman.qth.net; Benson b...@fastmail.us
Sent: Friday, January 23, 2009 9:06 PM
Subject: Re
I sense a business model developing.
Maybe a variable collar, just like the variable Xtal filters, hi
Glenn
- Original Message -
From: Lee Buller
To: Elecraft Reflector
Sent: Friday, January 23, 2009 11:11 PM
Subject: Re: [Elecraft] Elecraft tee shirts - Golf Shirts
I second that. Lovely logo!
73
Glenn ON4WIX
K3/100 #192
K2/100 #5361
- Original Message -
From: David Ferrington, M0XDF m0...@alphadene.co.uk
To: Mike Markowski m...@udel.edu
Cc: Elecraft elecraft@mailman.qth.net
Sent: Friday, January 23, 2009 11:17 PM
Subject: Re: [Elecraft] Elecraft
cool on the shack picture printed on your QSL card! If you
*really* want to use a Neumann, I strongly suggest you look into the KSM105
which is designed for stage use. It has a built-in plop screen which is
*very* effective and the capsule's response is about equal to the KM84.
73
Glenn ON4WIX
.
Enjoy the holiday season and the unwrapping of *the box from Aptos*
73 es GL
Glenn ON4WIX
- Original Message -
From: Colin Whitmore
To: elecraft@mailman.qth.net
Sent: Friday, December 12, 2008 9:34 PM
Subject: [Elecraft] That's just wrong!
So, a couple of months ago I place
No problems here. My K3/100 #0192 loaded with the latest FW switches on
without any bursts of noise. Just a few relay clicks and the radio comes to
life as one would expect.
73
Glenn ON4WIX
- Original Message -
From: Mike Scott m...@paxsen.com
To: Elecraft@mailman.qth.net
Sent
My K3 is also whisper quiet. I have to look at the fans to check whether
they're running or not because I cannot hear them running at all.
73
Glenn ON4WIX
K3 #192
K2 #5361
- Original Message -
From: Joe Planisky [EMAIL PROTECTED]
To: David Ferrington, M0XDF [EMAIL PROTECTED]
Cc
Hi Steve,
I'm running the latest beta here (2.46/1.92/1.92/0.02).
CONFIG:TUN PWR is still on my K3, between TTY LTR and TX ALC where it's been
from the start.
Did you notice any change or has this menu item disappeared altogether in your
radio?
73
Glenn ON4WIX
K3/100 #0192
K2/100 #5361
If you hear ON4NOK/p, give us a yell.
My K3 will be floating around on our club's FD site, hi
73 es GL
Glenn ON4WIX
- Original Message -
From: Stewart Baker [EMAIL PROTECTED]
To: GW0ETF [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Friday, September 05, 2008 2:51 PM
Subject: Re
tent in order to
avoid out of segment errors.
73
Glenn ON4WIX
- Original Message -
From: David Pratt [EMAIL PROTECTED]
To: ON4WIX [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Sent: Friday, September 05, 2008 5:43 PM
Subject: Re: [Elecraft] IARU Region 1 SSB Fieldday this weekend
Fine
and then I get E00039 on the VFOA display and VFOB
shows ERR VC4.
Please advise on which steps to take to remove this error.
Thanks in advance
Glenn ON4WIX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
, this leaves two questions I guess:
What do the E00039 and ERR VC4 error messages mean exactly?
and, not knowing the answer to my first question yet,
Should I be worried, even though everything *seems* to be working OK?
Thanks again for any input
73
Glenn ON4WIX
K3/100 #0192
- Original Message
conductor ring while the 75 ohm version does not have this
teflon shell.
It's the teflon that causes the impedance difference, *not* the inner
conductor diameter.
73
Glenn ON4WIX
- Original Message -
From: w9cf [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, August 07
Same here (the adapter, NOT the senior moment, hi!)
Kenwood adapter with Proset Plus and footswitch.
Works FB.
Glenn ON4WIX
- Original Message -
From: Bill W4ZV [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, August 06, 2008 7:48 PM
Subject: Re: [Elecraft] K3 Heil
Same here. Ordered May 3. My K3 has S/N 0192.
Guess it's vacation time (and a well deserved one!) in Aptos.
73
Glenn ON4WIX
- Original Message -
From: Geoffrey Downs [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, July 29, 2008 9:08 PM
Subject: Re: [Elecraft] K3: KRX3
That should read May 3, 2007
8-)
- Original Message -
From: ON4WIX [EMAIL PROTECTED]
To: Geoffrey Downs [EMAIL PROTECTED];
elecraft@mailman.qth.net
Sent: Tuesday, July 29, 2008 9:23 PM
Subject: Re: [Elecraft] K3: KRX3 Shipping?
Same here. Ordered May 3. My K3 has S/N 0192.
Guess
You can also add G0CUZ's Winlog32 to the list.
73
Glenn ON4WIX
- Original Message -
From: [EMAIL PROTECTED]
To: Greg - N4CC [EMAIL PROTECTED]; Rick Tavan N6XI [EMAIL PROTECTED];
Elecraft Reflector elecraft@mailman.qth.net
Sent: Sunday, June 22, 2008 4:08 PM
Subject: Re: [Elecraft] 3rd
Let's see who can answer this question first (without looking at a
thermometer!):
There is one point on the scale of a thermometer where the temp in Celsius
and Farenheit are equal. Which one?
Have fun,
Glenn ON4WIX
- Original Message -
From: Joe Subich, W4TV [EMAIL PROTECTED
Let's see who first answers this one right (without looking at a
thermometer!):
There is one point on the scale of a thermometer where the temp in °C equals
the temp in F.
Which one is that?
Feel free to prove mathematically...
Enjoy!
Glenn ON4WIX
- Original Message -
From: Joe
Consider your wish granted, hi
http://uk.shopping.com/xPF-AEG-AEG-Fridge
73 de Glenn ON4WIX
- Original Message -
From: Tom Hall [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, May 29, 2008 8:18 PM
Subject: [Elecraft] I want a blue K3
..with chrome knobs and an LCD
accurate power/SWR readings.
Thanks for any help
Glenn ON4WIX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
forgotten to
turn off the bias voltage. No harm was done however and everything is still
working FB to this day.
Hope this helps
73
Glenn ON4WIX
- Original Message -
From: Tom Childers, N5GE [EMAIL PROTECTED]
To: Bruce McLaughlin [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Sent: Friday
slanted on my desk so all LEDs are clearly visible. Have
any of you done such a thing? Any ideas and suggestions would be very
welcome.
Have a nice weekend!
73 de Glenn ON4WIX
K2/100 #5361
K3/100 #0192
Two left hands ;-)
___
Elecraft mailing list
ON4WIX
K2/100 #5361
K3/100 #0192
- Original Message -
From: Dave G4AON [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Friday, March 21, 2008 1:31 PM
Subject: [Elecraft] K3 XMIT in SSB modes
Julian
Mine doesn't behave like that, it works as expected and toggles the TX on
/off
that there will be no
discernible difference on the receiving end when going from 90W to 110W but
as they say... inquiring minds want to know.
73 es tnx
Glenn ON4WIX
K2/100 #5361
K3/100 #192
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
ON4WIX/OR4W
K2/100 s/n 5361
K3/100 s/n to be discovered in 5 hours (and counting, hi)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Just got home and saw the brown box sitting on my desk.
It appears I have received serial number 192. Ordered May 3, shipped Jan 7
and received Jan 9.
Now where did I put those hardware containers I used while building my K2...
Off to sorting now!
73 de Glenn ON4WIX/OR4W
- Original Message
Would that be Just Learn Morse Code (http:\\justlearnmorsecode.com) ?
I heard a lot of my local club's members talk about how good this software
is.
Haven't tried it myself though.
Hope this helps
GL es 73
Glenn ON4WIX/OR4W
- Original Message -
From: STEPHEN W BANKS [EMAIL PROTECTED
But do they *bark* back?
just kidding, I just had to post this silly/lame joke
love HRD, Simon. Thanks for all the effort you put into it!
73 de Glenn ON4WIX
K2/100 s/n 5361
K3/100 on order
- Original Message -
From: Simon Brown (HB9DRV) [EMAIL PROTECTED]
To: [EMAIL PROTECTED
but maybe some time an be
saved...
FWIW, DC resistance across the red lead is 0.2 ohms, DC resistance across the
black lead is slightly less at 0.1 ohms when measured out of circuit.
Thanks in advance for any suggestions.
CU this weekend in the UBA CW DX contest
Glenn ON4WIX/OR4W
. Voltage
at RX is 14.2 volts.
Thanks also to Tom N0SS for the comparison with larger gauge cable.
This reflector really adds to the Elecraft experience.
73 and thanks again!
Glenn ON4WIX/OR4W
K2/100 s/n 5361
- Original Message -
From: Ron D'Eau Claire [EMAIL PROTECTED]
To: 'ON4WIX
are a fb
choice for all-round use. Ditto for Sennheiser 604's (try those on drums
and/or percussion)
73
Glenn ON4WIX
getting ready for the UBA CW contest this weekend with my K2/100 s/n 5361
- Original Message -
From: Darwin, Keith [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent
Same here, from my little corner of the globe.
73 fer u es urs, gud dx es gl!
Glenn ON4WIX / OR4W
- Original Message -
From: f9oj.7 [EMAIL PROTECTED]
To: Elecraft elecraft@mailman.qth.net
Sent: Friday, December 22, 2006 8:26 PM
Subject: [Elecraft] Xmas
To the Elecraft gang and to all
and the inner conductor contacts.
Hope this helps.
73 and enjoy building your radio
Glenn ON4WIX
- Original Message -
From: David C Dawson [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, November 13, 2006 5:17 AM
Subject: [Elecraft] Alignment of VCO - Problem
Hi,
I am
Hi Bill
Same here with my K2 s/n 5361.
As far as I can tell my front panel circuit board is not 100% aligned with
the front panel. I haven't had the time to try and correct this. Maybe
someone else has tried this before?
73
Glenn ON4WIX
- Original Message -
From: jmalloy [EMAIL
of cake to separate them from the cable.
Hope this helps.
73 es gud DX
Glenn ON4WIX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
90 watts into a dummy load but the difference
between 90 and 110 watts will never be noticed in practice.
Thanks again for all the good advice I got while building my K2/KSB2/KPA100.
Hope I'll be able to return the favour one day and to maybe work you guys on
the air.
73 de Glenn ON4WIX
K2
and ground and I'm
reading a dead short. Can this be caused by RFC 10? I guess I should read at
least a few ohms. Would it be OK to desolder RFC 10 just to check if I'm
getting any improvement?
Any ideas are welcome
73
Glenn ON4WIX
___
Elecraft mailing
damaging the parts I would be very
grateful... BTW, are these connectors standard items so I could get
replacements easily in case I damage the connectors?
73 (head hanging in shame, hi)
Glenn ON4WIX
- Original Message -
From: ON4WIX [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent
at the reflector archives but can't find any mention about
this phenomenon. I have checked all soldering, component values, toroid tinning
but can't see anything out of the ordinary.
Any hints as to where I should start looking are very much appreciated.
73 and thanks
Glenn ON4WIX
Sunday
73 de Glenn ON4WIX
- Original Message -
From: John D'Ausilio [EMAIL PROTECTED]
To: ON4WIX [EMAIL PROTECTED]
Sent: Sunday, April 09, 2006 5:41 AM
Subject: Re: [Elecraft] K2 s/n 5361 SSB TX audio problem
I had a crappy audio issue that turned out to be RF getting into the
audio
be doing fine.
Any suggestions on where to start looking for the cause of this problem are
more than welcome.
Thanks in advance
Glenn ON4WIX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
filter related problem given the choppy
audio. It's not really a problem that's situated in the frequency domain.
Anyone had a similar experience?
Have a very nice Sunday
73 de Glenn ON4WIX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
somewhere in the 160m LPF as there is no sign of any problems on any other
band. I checked the forum archives for clues. I did find an article pointing to
the capacitor values mentioned earlier but I've got the correct values
installed.
Any ideas?
Tnx for your help.
73 de ON4WIX Glenn
numbers, what have you.
Any ideas?
Tnx fer all input
73 de ON4WIX Glenn
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
of the manual. I do not have a signal generator here so if you're sending in
any hints please take this into account.
Thanks for your help
Glenn ON4WIX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Weller solder station so all should be FB I hope...
Thanks also to Martin for providing the link to the photographs. Merci bien
Martin, j'espère te rencontrer sur les bandes très bientôt avec mon K2!
On to the toroids now...
Thanks again, I owe you all.
73 de Glenn ON4WIX
leads at
those sides of the Xtal housings?
Thanks for any advice.
73 de Glenn ON4WIX
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
.
Is this only necessary for older K2 models or is it necessary to order this
upgrade even with a brand new kit?
Thanks for shedding a light on this subject. I can't wait to start building
this baby...
73 from Belgium
Glenn ON4WIX
___
Elecraft mailing list
Post
78 matches
Mail list logo
