What does the manual say?
On 9/2/2016 1:55 PM, Tim Cook wrote:
Making some progress, found that after enabling text on the PX3 I have to turn
the PX3 off then on and then the decoded text will show up on the display. If
I turn off text and on via the menu it stops decoding and won't start
Hi Tim,
I just verified the bug on my unit here. I'll put it on the list. In the
meantime you can set TxtAuto so it is enabled. This will automatically turn
on the text window whenever the KX3 is put into a text mode, i.e. CW, or
DATA.
73,
Paul
--
View this message in context:
Same here. This is an "undocumented feature" (i.e., firmware bug). Please
E-mail Paul Saffren (psaffren at elecraft dot com).
You can enable and disable text using the "LABELS" (hold) switch. This
won't require a power-cycle to take effect. This is probably easier than
using the menu.
Joe
Making some progress, found that after enabling text on the PX3 I have to turn
the PX3 off then on and then the decoded text will show up on the display. If
I turn off text and on via the menu it stops decoding and won't start again
until I cycle the power on the PX3.
Any thoughts?
Thanks
4 matches
Mail list logo
