Jay wrote:
...someone can refresh the step I need to do (so I don't have to relearn
the complete alignment process). On lower SSB I'm being told I'm 100
hertz low transmitting, but the receiver is just fine. I don't want
to mess up my cw settings since
Provided that you use filter 1,
It's been so long since I studied the manual, maybe someone can refresh
the step I need to do (so I don't have to relearn the complete alignment
process). On lower SSB I'm being told I'm 100 hertz low transmitting,
but the receiver is just fine. I don't want to mess up my cw settings
since
Jay,
I suggest that you review the K2 Dial Calibration article on my website
http://w3fpr.qrpradio.com and then do a full calibration run including
the SSB filters using Spectrogram.
If that does not correct it, then re-do the calibration. The VFO and
the BFO are about the only thing that
Jay wrote:
On lower SSB I'm being told I'm 100 hertz low transmitting,
I wouldn't go solely on the word of an off-air report about being off
frequency. The only way to be sure is to measure your transmit frequency. If
the radio of the other operator was 50Hz high and you are 50Hz low, they
4 matches
Mail list logo
