Mark,
Haven't tried any macros in the KX3. Will try yours, tnx.
73, Ed - KL7UW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
You'll need new KX3 firmware for this, presently still in field test.
If you'd like to try it, please email me directly.
73,
Wayne
N6KR
On Mar 4, 2013, at 9:34 AM, Edward R Cole wrote:
Mark,
Haven't tried any macros in the KX3. Will try yours, tnx.
73, Ed - KL7UW
Thanks to Wayne's pointing to the proper Dual Watch Command SB1 for on and SB0
for off, I've got a working set of Macros assigned to PF1 and PF2 to
effectively turn split on, set the B VFO up 2 KHz, Turn on Dual Watch so I can
hear the pile (must use stereo headphones or plug in a set of stereo
Great, Jim. It also turns out there's a way to toggle between two or
more macros on a single PFx switch. Mark Goldberg thought of this.
Here's his example that rotates through four macros on PF1 using self-
modifying setups:
I used self modifying code. Each macro assigns a different macro
The DELAY is not really needed. From what Wayne says if used on RS232 it
will cause a delay as it just gets
characters that do nothing. I don't know if it provides much delay if the
macro is run internally.
It looks like the MACRO X command MN110 was just added at this change if I
read the
I think these will work for turning on and off dual watch, cycling between
Dual Watch and Split Up 5, Up 10, Up 15 and
Normal. These are assigned to PF2 and they seem to work for me.
DLW+5 SWT25;SWT25;FT0;SB0;SWH25;SB1;UPB7;MN110;SWT29;SWH26;MN255;
DLW+10
6 matches
Mail list logo