Lynn,
Yes, I sent an email to someone connected with the beacon.
73,
John
WA1EAZ
> On Dec 16, 2017, at 2:46 PM, Lynn W. Taylor, WB6UUT
> wrote:
>
> I think I'd at least try. The responsible operator may not know, and might
> be happy to find out.
>
> I'd
I think I'd at least try. The responsible operator may not know, and
might be happy to find out.
I'd offer to assist.
After all, it's not a complaint, it's an opportunity to fix a problem.
73 -- Lynn
On 12/16/2017 7:07 AM, John Stengrevics wrote:
The owner does list his Email address. So,
Hi Scott,
The NB actually helps reduce the splatter.
73,
John
WA1EAZ
> On Dec 16, 2017, at 1:00 PM, K9MA wrote:
>
> On 12/16/2017 08:46, stengrevics wrote:
>> I've tried adjusting the noise blanker and that
>> helps somewhat.
>
> Turn the noise blanker off, to make
On 12/16/2017 08:46, stengrevics wrote:
I've tried adjusting the noise blanker and that
helps somewhat.
Turn the noise blanker off, to make sure the NB isn't causing the
splatter. (Which it can.)
73,
Scott K9MA
--
Scott K9MA
k...@sdellington.us
Ham beacons are often built with el cheapo grande gear and keyed by
means that generate clicks. There's nothing in FCC Rules that exempts
them from requirements to transmit a clean signal.
Contact the owner, let him/her know of the problem, and that you expect
it to be fixed.
73, Jim K9YC
Many thanks for all the suggestions. Some points:
1. I am literally a couple of miles from the K1MS/B beacon. So, it has always
been really loud here.
2. I did change antennas & feedline recently. I now have a 9 element LFA at
50 feet fed with 7/8” hardline to the rotor and Messi &
Thanks Jon.
May well be antenna related.
John
WA1EAZ
> On Dec 16, 2017, at 11:38 AM, JJ wrote:
>
> John,
> I'm not as close to the beacon as you but I hear it 24/7 and haven't
> noticed anything different from it. Same chirp it's always had and nothing
> else.
> Good
John,
I'm not as close to the beacon as you but I hear it 24/7 and haven't
noticed anything different from it. Same chirp it's always had and nothing
else.
Good luck and 73,
Jon WS1K
> I have a beacon a couple of miles from me that has recently begun to
>> splatter
>
> all over the 6 meter
Hi John
I am assuming that you are referring to K1MS/b in FN42. I know that
K1SG,Steve Gilbert, is involved with that beacon as well as K1MS, Ivan.
They contacted me to design and build a rugged small yagi for that
beacon as all the previous commercial ones they used fell apart in the
I would ask this another way. What has changed recently. It certainly sounds
like the transmitter is at fault, but similar situations can arise in
conditions local to your station. Have you changed your antennas? Has something
changed in your antennas? Something in the feedline or antenna with
John,
It has to be fixed at the source. There is not much that can be done
with a situation like that at the receiving end - unless as K4TAX
suggests, it is a strong signal and something in your receiving antenna
system is acting like a diode detector.
73,
Don W3FPR
On 12/16/2017 10:07
The owner does list his Email address. So, I would have to write a letter with
who knows what degree of cooperation. Hoping for a Elecraft technology fix!
John
WA1EAZ
> On Dec 16, 2017, at 9:59 AM, Bob McGraw K4TAX wrote:
>
> I would contact the owner and work with him
I would contact the owner and work with him to resolve the issue.
Likely something near the beacon antenna, such as a metal to metal joint
that is acting like a diode and generating spurious radiation. Or if
the signal is strong, it could be in your antenna system causing the issue.
73
Is this a ham radio beacon? Contact the owner and let them know. It does
not sound like it is in compliance. If not a ham radio thing, still contact
the owner, as it may be suddenly broken.
Best of luck.
Mark
W7MLG
On Dec 16, 2017 7:49 AM, "stengrevics" wrote:
I have
I have a beacon a couple of miles from me that has recently begun to splatter
all over the 6 meter band. I've tried adjusting the noise blanker and that
helps somewhat. I also tried adjusting the filter width, and shifting the
filter setting, with little result.
Anyone have any experience
15 matches
Mail list logo