Wayne
I will be doing all the mods for Christmas. Hope you can give us the info
really soon so I don't have to take the K3 apart again. Can you just point
to the circuit and tell us what you intend ahead of the official mod
instruction?
73
David
G3UNA
To this end, we're working
on a
Hi David,
Lyle, KK7P (who designed the KIO3 board set) will create an application
note and post it as soon as possible.
The short version is: put 1/8-W (or larger), 470-ohm resistors from
each speaker output to ground. (The actual value isn't critical;
anything from 330 to 1000 ohms would
Thanks for your observations on this, Todd.
Just to be safe, we recommend using a stereo plug even when only a
single external speaker is being used. This is discussed in detail in
the owner's manual (page 20 in the case of revision D). Just use the
TIP contact of the plug for the speaker,
3 matches
Mail list logo