-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ignacy
Sent: Thursday, December 17, 2009 10:23 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Why K3 appears noisy?
Rather than debate whether K3 is noisy I suggest to debate
Rather than debate whether K3 is noisy I suggest to debate why it appears so
to many. Then it can lead to fixes. Below are a few hypotheses.
1. Highest AGC threshold is too low.
2. Gain distribution under RF gain. RF gain under AGC does not reduce noise
as much as with AGC off. The reduction
I believe I've written about this before, at least to a few, but perhaps it
bears repeating. I have done a side-by-side comparison of my K3 with another K3
when RF (actually IF) gain was reduced with the AGC on.
With my radio, tuned to a S9+50 dB BC station, even a slight decrease in gain
was
Hi Wes:
I took a look at the RF Gain Calibration on the K3 Utility and they offer
two ways of doing it. One requires a signal generator and one uses factory
default values. Is the factory default method satisfactory or is it
necessary for us to purchase the XG2 to do the calibration properly.
4 matches
Mail list logo