Greetings all;
As I work my way thru about a 2 lb coffee can full of taps of various
sizes and conditions, one thing seems to be a potential cause of
mistakes more than anything else.
I have this all in one file, with a small stack of vars at the top of the
file that get edited on a per run
On 26 June 2018 at 19:16, Curtis Dutton wrote:
> Ok makes sense. I found the datapainter.vhd in the hostmot2 source code
> downloaded from mesanet. Doesn't look like it is in the linuxcnc git yet.
The hostmot2 in the LinuxCNC git is a bit behind.
--
atp
"A motorcycle is a bicycle with a
https://forum.linuxcnc.org/49-basic-configuration/34752-y-axis-movement-on-x-axis-straight-line-move-related-to-backlash-comp#112640
He seems to think that the system is detecting a phantom sign-chnage
in an FP number.
It does seem entirely plausible.
--
atp
"A motorcycle is a bicycle with a
On Tue, 26 Jun 2018, Curtis Dutton wrote:
Date: Tue, 26 Jun 2018 14:16:16 -0400
From: Curtis Dutton
Reply-To: EMC developers
To: EMC developers
Subject: Re: [Emc-developers] Pre-Pull Request Review: Better laser engraver
support + new HAL pin type "PORT"
Ok makes sense. I found the
Ok makes sense. I found the datapainter.vhd in the hostmot2 source code
downloaded from mesanet. Doesn't look like it is in the linuxcnc git yet.
On Tue, Jun 26, 2018 at 11:31 AM, andy pugh wrote:
> On 26 June 2018 at 02:30, Curtis Dutton wrote:
> > Peter that sounds great. Can I get some
On 06/25/2018 08:47 PM, Jon Elson wrote:
On 06/25/2018 12:57 PM, andy pugh wrote:
On 25 June 2018 at 17:07, Jon Elson
wrote:
On 2.8.0~pre1 (I think I get this on 2.7.14 also) any
config that accesses
the parallel port produces
an error message on the Axis screen:
Using the hal_parport
On 26 June 2018 at 02:30, Curtis Dutton wrote:
> Peter that sounds great. Can I get some links into the relevant pieces? I'm
> willing to work on this, and add to the hm2 driver, do some testing and get
> something going after I finish my man pages. I have a 6i25 and a smart
> serial IO card in
