the link expires 5/16/2021
On Sat, May 8, 2021 at 4:43 PM Stuart Stevenson wrote:
> Juergen,
>
> This link will give you the EMC2 files used to run the 5 axis cinci with
> TLO and Pivot Length offsets. The machine has an A axis carried by the B
> axis and both ride on the Z axis. I hope this
Juergen,
This link will give you the EMC2 files used to run the 5 axis cinci with
TLO and Pivot Length offsets. The machine has an A axis carried by the B
axis and both ride on the Z axis. I hope this will help you.
https://www.dropbox.com/s/n3qnegnk52ke1gj/emc2-stuart.tgz?dl=0
thanks
Stuart
I was helping one of the guys on the IRC the other day to connect up a
push button to the start I/O bit but don't know if he tested it or not...
JT
On 5/7/21 5:47 PM, andy pugh wrote:
http://linuxcnc.org/docs/2.8/html/man/man9/at_pid.9.html
I have just remembered that, as far as I am aware,
Thanks Stuart,
right now, that sounds like villages in the desert to me, but I'll go into it.
me ... going to dive into lcnc documentation
thanks Ju
From: emc-developers-requ...@lists.sourceforge.net
Sent: Saturday, May 8, 2021 8:19 AM
To: