forge.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Emc-developers digest..."
>
>
> Today's Topics:
>
>1. Re: 4th axis pivot point question (Stuart Stevenson)
>
>
> -----------
Date: Sat, 8 May 2021 16:45:33 -0500
From: Stuart Stevenson
To: EMC developers
Subject: Re: [Emc-developers] 4th axis pivot point question
Message-ID:
Content-Type: text/plain; charset="UTF-8"
the link expires 5/16/2021
On Sat, May 8, 2021 at 4:43 PM Stuart Stevenso
t..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: 4th axis pivot point question (Stuart Stevenson)
>>
>>
>> --
>>
>> Message: 1
>> Date: Fri, 7 May 2021 21:52:42 -0500
&
Emc-developers digest..."
>
>
> Today's Topics:
>
>1. Re: 4th axis pivot point question (Stuart Stevenson)
>
>
> --------------
>
> Message: 1
> Date: Fri, 7 May 2021 21:52:42 -0500
> From: S
opers] 4th axis pivot point question
Message-ID:
Content-Type: text/plain; charset="UTF-8"
Juergen,
Are you talking about the display on the AXIS preview or are you talking
about machine motion?
If you are talking about the display on the screen I don't have much
experienc
Juergen,
Are you talking about the display on the AXIS preview or are you talking
about machine motion?
If you are talking about the display on the screen I don't have much
experience with that.
If you are talking about machine motion then -
You can modify your kinematics file to include a pivot
On Fri, 7 May 2021 at 16:43, Juergen Gnoss wrote:
Pivot point of the B axis is about 100mm above spindle collet.
>
> Do I need to tell LCNC something about that in configuration or hal, or is
> that handled by tool offset in Z ?
>
It's not really handled at all.
The machine will do what the
I did a lot of reading but I'm still confused.
I try to setup a router that runs XYYZB
B rotates the spindle around y axis.
Pivot point of the B axis is about 100mm above spindle collet.
Do I need to tell LCNC something about that in configuration or hal, or is that
handled by tool offset in
