Richard, T1.315-2001 (Revision of T1.315-1994) American National Standard for Telecommunications Voltage Levels for DC-Powered Equipment Used in the Telecommunications Environment
The standard encompasses the following: STEADY-STATE INPUT DC VOLTAGE REQUIREMENTS DISTRIBUTION VOLTAGE REQUIREMENTS UNDERVOLTAGE REQUIREMENT OVERVOLTAGE TRANSIENT PROTECTIVE DEVICE OPERATION REQUIREMENTS ELECTRICAL NOISE IMMUNITY NOISE EQUIPMENT NOISE RETURNED BY THE TELECOMMUNICATIONS LOAD VOICE FREQUENCY NOISE REQUIREMENTS WIDEBAND FREQUENCY NOISE Al -----Original Message----- From: rst...@xl.com [mailto:rst...@xl.com] Sent: Wednesday, October 15, 2003 11:06 AM To: vef00...@nifty.ne.jp; emc-p...@ieee.org Subject: ANSI TL 315 1994 << File: ANSI TL 315 1994.TXT >> good morning, Never heard of ANSI TL 315 1994 does anyone know what this is>? thnak you Richard, Richard A.Stone Excel Switching Corporation Compliance 75 Perseverance Way Hyannis, MA. 02601 508 862 3311 ph. 508 862 3020 fax rst...@xl.com This email message and any attachments to it contain confidential information that is intended only for the person or entity to which it is addressed. Any review, retransmission, dissemination, printing, or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please delete it or inform the sender. From: T.Sato [mailto:vef00...@nifty.ne.jp] Sent: Wednesday, October 15, 2003 9:30 AM To: emc-p...@ieee.org Subject: RE: centrifuges and the MDD On Wed, 15 Oct 2003 08:06:26 -0400, "Ned Devine" <ndev...@entela.com> wrote: > If the centrifuge is used for blood, then it is covered under the MDD. Maybe the In-Vitro Directive, if the centrifuge is intended to be used for in-vitro diagnostic applications. Regards, Tom Tomonori Sato <vef00...@nifty.ne.jp> URL: http://member.nifty.ne.jp/tsato/ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ============================================================ The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any reproduction, dissemination or distribution of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Tellabs ============================================================ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc