Folks,
Is there a standard specifying that the potential ESD hazard Must Be reduced to a level BELOW 200V ( or other max. voltage ) adjacent to any location where a customer's Semiconductor Device Under Test might be Handled or Contacted. Your comments would be most appreciated. Best Regards, Paul J Smith Teradyne, Inc., Boston, MA 02111 paul.j.sm...@teradyne.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"