John Thornton wrote:
Just goes to show you never know what is tucked away in the hills of south
east Missouri...
If I had to guess I would have guessed a job shop to support the lumber
industry.
I'm glad it is bigger than that.
There's a LOT of aerospace work in MO. The old
Ray Henry wrote:
I won't presume to speak for other presenters. I move a around a lot
for an old guy. Don't think that a web cam is going to do folk much
good although I'm not at all opposed capturing my events.
A good lapel mike and a camera focised on your whiteboard or
easel would get
Ed wrote:
Which brings up the question of power availability. I would like to
bring a project that would need 240V 3Phase at about 10Amps. Does anyone
know if that is available? Hard wiring or common plugs are not a
problem. Ed.
Roland most certainly has good 3-phase power at his
John Kasunich wrote:
The Mazak is three-phase, and plugs into a twist-lock receptacle, but I
don't recall if it is 240V or 480V. Depending on how continuously you
will need power we could unplug the Mazak and plug in your machine. I
seem to recall that the plug is fed from a disconnect,
A Skype conference should work.
2008/5/11 Jon Elson [EMAIL PROTECTED]:
Ray Henry wrote:
I won't presume to speak for other presenters. I move a around a lot
for an old guy. Don't think that a web cam is going to do folk much
good although I'm not at all opposed capturing my events.
Ok friends, this will be a great chance to make a European EMC workshop!
I'm willing to work further with a gathering and can take the responsibility
to manage the arrangement.
If you have any ideas or want to join me, don't hesitate to send a mail!
I'll go further with this during the upcoming
On Sat, May 10, 2008 at 7:53 AM, Dave Engvall [EMAIL PROTECTED] wrote:
The Mazak at Galesburg offsets (X and Y) to middle of table.
I thought limit switches needed to be at extents, because you can't run
right through them. How do they have it set up? It would work with an
optical trip -
If it is needed, I would not mind to host such a event at the Public
University of Navarra (Spain).
http://maps.google.es/maps?f=qhl=esgeocode=q=Zaandamsll=40.396764,-3.713379sspn=10.353023,17.270508ie=UTF8ll=42.798439,-1.635568spn=0.009746,0.016866t=hz=16
We have some labs, so we can work with
Hi Gary
The limits are at the end of travel. As are the home switches. On most
commercial machines like this there are 2-3 or 4 switches on each end of
travel. What we do is home to the switches at one end and then offset
to the center of the table. This offset is set in the ini file as a
Good on you, Svenne.
Even a long weekend would be wonderful. We'd try to arrange a visit
with our kids and gkid in Dortmund around the time.
We would do well to think about what we want to accomplish beyond
getting acquainted and sharing stories and info.
Rayh
On Sun, 2008-05-11 at 10:49
Transportation will certainly be a consideration for location but I'd be
willing to bet that you will work out several places that can host such
an event. This is exciting.
Rayh
On Sun, 2008-05-11 at 13:22 +0200, jros wrote:
If it is needed, I would not mind to host such a event at the
Ok - what am I missing - how do I force the Axis window to start MAXIMIZED
when I click on the icon created by stepconf when I started my base config
file? There's got to be something - just not familiar enough with X to
figure it out - my Linux knowledge is based more in the command line
Check this out:
http://article.gmane.org/gmane.linux.distributions.emc.user/2385
Regards,
Alex
On Sun, 2008-05-11 at 10:33 -0400, Greg Michalski wrote:
Ok - what am I missing - how do I force the Axis window to start MAXIMIZED
when I click on the icon created by stepconf when I started my
Thanks Alex! You guys are quick AND thorough. I love this list. Now I
just need to get my LAN cabling out to the garage so I can access the
internet
Thanks again to everyone who contributes - hopefully someday I'll be
knowledgeable enough to play the mentor part instead of the mentee :)
On May 11, 2008, at 3:12 AM, Gary Fixler wrote:
On Sat, May 10, 2008 at 7:53 AM, Dave Engvall
[EMAIL PROTECTED] wrote:
The Mazak at Galesburg offsets (X and Y) to middle of table.
The limit switches yes but emc provides offsets after home.
I thought limit switches needed to be at
On Sun, May 11, 2008 at 10:33:20AM -0400, Greg Michalski wrote:
Ok - what am I missing - how do I force the Axis window to start MAXIMIZED
This may help you:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?To_Make_The_AXIS_Screen_As_Large_As_Possible
Jeff
Thanks Jeff - I see it's the same info as Alex posted a bit earlier - though
you point out that I missed it in the wiki :( my search foo seems to be
faltering of late...
Thanks.
Greg Michalski
- Original Message -
From: Jeff Epler [EMAIL PROTECTED]
To: Enhanced Machine Controller
On Wed, May 07, 2008 at 12:40:05PM -0700, Kirk Wallace wrote:
I get a blank page with this link:
http://cvs.linuxcnc.org/lxr/source
Fixed.
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss
I'd second that - I can't justify time off from real income for what is for
now a hobby, if the proceeds from a sale of DVDs (even if just unedited off
the cuff stuff) went to the developement team as donations I'd step up.
Even setting up a cam and recording each of the sessions would be
19 matches
Mail list logo
