I need SercosII driver and HAL component for EMC2.Can anyone send me?
--
Enter the BlackBerry Developer Challenge
This is your chance to win up to $100,000 in prizes! For a limited time,
vendors submitting
On my lathe I have spindle on/off buttons that are implemented using
halui.spindle.forward and halui.spindle.stop. I have noticed some odd
effects when using them.
Often the spindle starts at 500 RPM instead of the commanded speed. For
instance if I enter M3S1000 in MDI the spindle runs at
To all on the emc-users list,
Today I received an email from Roland. His auction is over and
he did not sell the Mazaks. His is offering them EMC folks since
one is already retrofitted with EMC. If you are interested, have
a look at the message below.
Cheers,
Steve Stallings
-Original
Tim
This seems somewhat related to a recent request of mine. I had asked
about being able to use MDI or manual modes during a tool change. Leslie
provided me with a new hal_manualtoolchange which allowed me move etc.
then hit continue and return to the program. In this case I would zero
my
That script will only work on a tool change. I don't think there is a
way of running a script from M0 or M1.
Tim, is the weld line straight or a complicated shape? If I was doing it
I think I would write a script to do all of it and bypass the g-code
completely. Another alternative would be to
Gentlemen,
I just did a 'git pull'. My install will not configure as there is
no longer a configure file. What do I do now?
thanks
Stuart
--
you can lead a person to knowledge
but you cannot make him think
--
Enter
Stuart Stevenson wrote:
Gentlemen,
I just did a 'git pull'. My install will not configure as there is
no longer a configure file. What do I do now?
thanks
You need to run autoconf. Since configure.in is a generated file, it
was removed from the repository.
I think this can be done with
On Wed, Jul 15, 2009 at 12:29:52PM -0500, Stuart Stevenson wrote:
Gentlemen,
I just did a 'git pull'. My install will not configure as there is
no longer a configure file. What do I do now?
thanks
Stuart
Here is the announcement and instructions. It looks like jeff sent
this only to the
Stuart Stevenson wrote:
I just did a 'git pull'. My install will not configure as there is
no longer a configure file. What do I do now?
Jeff just changed this yesterday. The configure file is actually a
generated file, and as such never really belonged in the repository. It
is made by
thanks guys
On Wed, Jul 15, 2009 at 12:49 PM, Sebastian Kuzminskys...@highlab.com wrote:
Stuart Stevenson wrote:
I just did a 'git pull'. My install will not configure as there is
no longer a configure file. What do I do now?
Jeff just changed this yesterday. The configure file is
10 matches
Mail list logo