Hello
I want to ask about home made spindle belt drive.
I look and found spindle with CAT 30 made in China but also in China for $
1500. It looks good but too heavy for my application cutting wood
plastic. Is there is some simple spindle on 2 or 3 bearings belt drive?
I know about Colombo
I compiled v2.3.4 again. This is the output:
http://www.emrah.com/files/session.log
There are some warnings like:
/usr/realtime/include/rtai_lxrt.h:612: warning: ‘rtai_lxrt’ is static
but used in inline function ‘rt_get_adr’ which is not static
Does this cause the problem?
This is 2.6.30.5
The warnings are related to the newer gcc 4.3.2 and can be fixed by
configuring RTAI for eager inline (extended config in the first
menuconfig window).
from https://mail.rtai.org/pipermail/rtai/2009-February/021007.html
Maybe that fixes the bug too?
Regards,
Alex
- Original Message -
On 28 January 2010 08:00, a...@conceptmachinery.com wrote:
Does this type of round stock 1.5”-2” with one end machined to hold C5
collet exist or I need to machine everything?
Would R8 work? You can buy replacement/conversion spindles in R8 and
MT3 for the Mini Mill.
On 1/28/10, Alex Joni alex.j...@robcon.ro wrote:
The warnings are related to the newer gcc 4.3.2 and can be fixed by
configuring RTAI for eager inline (extended config in the first
menuconfig window).
from https://mail.rtai.org/pipermail/rtai/2009-February/021007.html
Maybe that fixes the
A minor segue from Seb's topic, since he mentioned the 32 bit
packages below - 64 bit PCs are becoming ever more available, and
coming down in price. Have we thought about 64 bit builds of
EMC2? What about 64 bit RTAI? Non-SMP of course... ;-)
Mark
At 05:52 PM 1/27/2010, you wrote:
The
On Wed, Jan 27, 2010 at 02:36:26PM +, Ian W. Wright wrote:
In the meantime I'd downloaded the source code tarball and
I've successfully installed it from that, I think. However,
it hasn't appeared on the Ubuntu menu system so - how can I
get it to do so or, alternatively, what command
On Thu, Jan 28, 2010 at 01:18:40PM +, Ian W. Wright wrote:
Jeff,
Does this mean that I need to uninstall the new installation, download a
fresh tarball and install again?
This is only in git. It's not in any of the released version tarballs.
This is only for run-in-place, not for
To ALL,
I have an mpg unit hooked up and it is working well. I also want to hook up a
second mpg encoder mounted to the operator panel to control feedrate override.
I can get one or the other working but not both hooked up together. I believe
the problem is that I need to seperate the mpg-a
On Thu, 2010-01-28 at 10:24 +, Andy Pugh wrote:
On 28 January 2010 08:00, a...@conceptmachinery.com wrote:
Does this type of round stock 1.5”-2” with one end machined to hold C5
collet exist or I need to machine everything?
Would R8 work? You can buy replacement/conversion spindles
On Mon, Jan 25, 2010 at 11:39:41PM +0100, micges wrote:
G43.1 In Km was changed to G43.1 Xn Ym ... Wn to allow set all tlo
values at runtime.
This is a deliberate incompatibility with emc 2.3. In 2.3.x, G43.1 K-
indicated a Z offset for most machines, but it could indicate an offset
of the W
Andy Pugh wrote:
On 28 January 2010 08:00, a...@conceptmachinery.com wrote:
Does this type of round stock 1.5”-2” with one end machined to hold C5
collet exist or I need to machine everything?
Would R8 work? You can buy replacement/conversion spindles in R8 and
MT3 for the Mini
On 28 January 2010 16:26, Kirk Wallace kwall...@wallacecompany.com wrote:
(I think that other than the location of the thread R8 and 5C are the same)
Just in case:
http://www.dunhamtool.com/5c_collet.html
http://www.dunhamtool.com/r8_collet.html
Aha, so not at all the same then. And so
I haven't been following this thread so please excuse me if this has
already been mentioned. You might want to look into using the spindle
from a spin indexer like this:
http://www.use-enco.com/CGI/INSRIT?PMAKA=505-2280PMPXNO=951647PARTPG=INLMK3
Not sure how concentric the collet taper is to the
On 28 January 2010 16:12, Paul Keeton pkeet...@woh.rr.com wrote:
I have an mpg unit hooked up and it is working well. I also want to hook up a
second mpg encoder mounted to the operator panel to control feedrate
override. I can get one or the other working but not both hooked up together.
On 1/28/10, Alex Joni alex.j...@robcon.ro wrote:
The warnings are related to the newer gcc 4.3.2 and can be fixed by
configuring RTAI for eager inline (extended config in the first
menuconfig window).
from https://mail.rtai.org/pipermail/rtai/2009-February/021007.html
Maybe that fixes the
I found the following info inkernel.org:
http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.31.6
commit 9f00eee2ffab59cb85ecf1de54282c7fb4669565
Author: Rusty Russell ru...@rustcorp.com.au
Date: Thu Oct 29 08:56:16 2009 -0600
2.6.30.5-rtai hits a kernel BUG when ctrl_type= is specified.
Investigation of in-kernel users of module_param_array(charp) implies
that they all use zero'd out arrays, in contrast to our initialized array.
the BUG is that param_set_charp attempts to kfree the old value.
Revamp how stepgen treats
Thanks Andy,
I will give it a go in a little bit. What you are saying
makes perfect sense to me and should work with no issues. Will let you know
either way.
Thanks for your reply,
Paul
- Original Message -
From: Andy Pugh
Nice... Thanks!
Dave
I just made some changes in 'master' to easily add menu items for
run-in-place compiles. After 'make', you can 'make install-menu' and
two menu items EMC2 (run-in-place) and Latency Test (run-in-place)
will be available under Applications CNC.
Please let me know if
20 matches
Mail list logo
