Bart,
Emcrsh is particularly suited for instances where you want to interface with
LinuxCNC from non-Linux platforms or at least where you do not want to
install other parts of LinuxCNC. It is a good option if you are prepared to
write an interface from scratch. If your interface is to run on
Hi Kirk:
Would u happen to know of a free ware compiler to use to program PIC's under
linux?
Thanks:
Bill
--
Virtualization Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but
I'm not kirk, but have you tried mplabX? I'd say the pickit3 will work the
best with mplabX currently.
On Fri, Mar 2, 2012 at 12:54 PM, Cathrine Hribar bhri...@bresnan.netwrote:
Hi Kirk:
Would u happen to know of a free ware compiler to use to program PIC's
under
linux?
Thanks:
Bill
On Friday, March 02, 2012 01:18:50 PM Cathrine Hribar did opine:
Hi Kirk:
Would u happen to know of a free ware compiler to use to program PIC's
under linux?
Thanks:
Bill
According to google, which was very very slow to respond just now, SDCC and
GPUTILS seem to be relevant.
On Fri, 2012-03-02 at 10:54 -0700, Cathrine Hribar wrote:
Hi Kirk:
Would u happen to know of a free ware compiler to use to program PIC's under
linux?
Thanks:
Bill
I've only played with AVR's. I tried PIC's, but at the time, there where
no Linux C compilers, so I went to AVR. I still
On Friday, March 02, 2012 01:24:42 PM Cathrine Hribar did opine:
On Thu, 1 Mar 2012 21:23:11 -0500
gene heskett ghesk...@wdtv.com wrote:
Rather than inline the carriage drive screw, with will leave the motor
hanging out quite a ways on the left end of this lathe, I could save
about 3
Ben
SDCC is terrible at generating PIC code. I can't speak for it in general,
but I've never compiled more than the most trivial program without running
into critical bugs in the output (like mis-setting the bank).
The availability of an AVR GCC target is one of the reasons I
On Fri, Mar 02, 2012 at 12:21:15PM -0700, Cathrine Hribar wrote:
The availability of an AVR GCC target is one of the reasons I switched to
AVR. I don't regret it at all.
Hi Ben:
thanks for the info. What is an AVR?
As in Atmel AVR. A series of 8-bit microcontrollers covering the
(First Message may have failed due to attachment too big)
Attached is my first pass at an IRAMS circuit. It's pretty much a copy
of the IRF datasheet example. The plan is to hook up the digital signals
to an FPGA card, Pluto-P if I can find it, or 5i25 if I sell something
on eBay. The analog
On Fri, 2012-03-02 at 11:29 -0800, Ben Jackson wrote:
On Fri, Mar 02, 2012 at 12:21:15PM -0700, Cathrine Hribar wrote:
The availability of an AVR GCC target is one of the reasons I switched to
AVR. I don't regret it at all.
Hi Ben:
thanks for the info. What is an AVR?
As
2012/3/2 Kirk Wallace kwall...@wallacecompany.com:
(First Message may have failed due to attachment too big)
Attached is my first pass at an IRAMS circuit. It's pretty much a copy
of the IRF datasheet example. The plan is to hook up the digital signals
to an FPGA card, Pluto-P if I can find
On Fri, 2012-03-02 at 21:52 +0200, Viesturs Lācis wrote:
... snip
From my discussions with Andy Pugh our agreement was that 3-phase
pwmgen output from Mesa card should be the thing to feed into IRAMS
module.
... snip
The parallel port is too slow. I already have a Pluto-P and Pico UPC. I
think
Bill,
If you plan on using a Windows environment, then you can use Microchip's
MPLAB PIC IDE and several different C compilers, all freeware. MPLABX
is a new platform that is still a bit buggy, though usable. And it will
run under Linux. I use the PICKit 3 to program PICs, no problem. I
On Fri, Mar 2, 2012 at 12:54 PM, Cathrine Hribar bhri...@bresnan.net wrote:
Would u happen to know of a free ware compiler to use to program PIC's under
linux?
Which PIC? there's PIC10, 12, 16, 17, 18, 24, 30, and 32 and maybe
even PIC33. PIC32 is actually MIPS, so GCC supports it just fine.
On Fri, 02 Mar 2012 15:04:54 -0500
Doug Goff dg...@comporium.net wrote:
Bill,
If you plan on using a Windows environment, then you can use Microchip's
MPLAB PIC IDE and several different C compilers, all freeware. MPLABX
is a new platform that is still a bit buggy, though usable. And
On Fri, 2 Mar 2012 13:47:40 -0500
gene heskett ghesk...@wdtv.com wrote:
On Friday, March 02, 2012 01:24:42 PM Cathrine Hribar did opine:
On Thu, 1 Mar 2012 21:23:11 -0500
gene heskett ghesk...@wdtv.com wrote:
Rather than inline the carriage drive screw, with will leave the motor
On Fri, 2012-03-02 at 13:17 -0800, Karl Cunningham wrote:
... snip
What DC bus voltage are you planning to feed to the IRAMS module?
I have a 45 Volt motor to start testing with. I 'll probably start at 30
to 50 Volts depending on what supply I can scrounge up, then go up from
there. I would
On Saturday, March 03, 2012 01:26:16 AM Cathrine Hribar did opine:
On Fri, 2 Mar 2012 13:47:40 -0500
gene heskett ghesk...@wdtv.com wrote:
On Friday, March 02, 2012 01:24:42 PM Cathrine Hribar did opine:
On Thu, 1 Mar 2012 21:23:11 -0500
gene heskett ghesk...@wdtv.com wrote:
Attached is my first pass at an IRAMS circuit. It's pretty much a copy
of the IRF datasheet example. The plan is to hook up the digital signals
to an FPGA card, Pluto-P if I can find it, or 5i25 if I sell something
on eBay. The analog signals are an unknown for now. IRF seems to
recommend
19 matches
Mail list logo
