On 07/11/2018 02:52 PM, Leonardo Marsaglia wrote:
Hello Ed,
I plan to thread the bolts with rollers.
Axial or radial? Axial would be awkward if they are already headed.
The main concern for me was if the
1045 steel can be cold forged for this purpose of making the head of the
bolts.
On 11 July 2018 at 23:01, Joe Hildreth wrote:
> I think the driver works just fine. I agree that the control port is
> bidirectional. I would think that the entire control group of pins is set to
> either output (for modes in and out) and set to input (for mode x).
I think you are right.
On 11 July 2018 at 19:13, yomin estiven jaramillo munera
wrote:
> so i would like to known, how is the installation process of this
> card in the machine? thanks you.
If you are using LinuxCNC then just plug it in and configure with PnCConf.
You do not need to install any drivers other than
Thank you Andy.
I think the driver works just fine. I agree that the control port is
bidirectional. I would think that the entire control group of pins is set to
either output (for modes in and out) and set to input (for mode x). I am just
trying to confirm this. This is why I think
Great article. Thanks for sharing.
Joe
- On 11 Jul, 2018, at 16:31, John Dammeyer jo...@autoartisans.com wrote:
> I realize it's a tad off topic but I think Bjorn Ekwall wrote the first
> parallel
> port driver for Linux a long time ago. I worked with Bjorn in 2000 in the UK.
> Bjorn
On 11 July 2018 at 21:36, Joe Hildreth wrote:
> On this chart or table, it shows for the "in" column that pin 14 is an input
> pin. I think this is in error and should be labelled as an output. To test
> my theory, I installed a second PCI PP in a computer and run the stepper
> config
On Wednesday 11 July 2018 15:08:03 Gene Heskett wrote:
> On Wednesday 11 July 2018 14:13:10 yomin estiven jaramillo munera
wrote:
> > Hi, Gene. we have decided to use the Mesa 5i25 for our application,
> > in this case could you recommended us to use the standard profile or
> > the low profile?,
I realize it's a tad off topic but I think Bjorn Ekwall wrote the first
parallel port driver for Linux a long time ago. I worked with Bjorn in 2000 in
the UK. Bjorn died from a Heart Attack around 2001. He was one of the Linux
Pioneers.
https://www.linuxjournal.com/article/5043
Search for
Hello all,
I have been working on a series of tutorial videos on YouTube on CNC for the
Home Hobbyist. In the tutorial I am currently working on, I am discussing the
parallel port. I want to give as accurate information as I am able. My
question is about the documentation found at [
I think that would depend on the machine you are placing the cards in. A SFF
(Small Form Factor) machine will require a low profile card while a regular
desktop will take a full size card.
Joe
- On 11 Jul, 2018, at 13:13, yomin estiven jaramillo munera
yejm...@gmail.com wrote:
> Hi,
Hello Ed,
I plan to thread the bolts with rollers. The main concern for me was if the
1045 steel can be cold forged for this purpose of making the head of the
bolts.
I've machined forged camshafts of 1045 steel but they were made with the
hot forging method. I must say I have zero experience in
On Wednesday 11 July 2018 14:13:10 yomin estiven jaramillo munera wrote:
> Hi, Gene. we have decided to use the Mesa 5i25 for our application, in
> this case could you recommended us to use the standard profile or the
> low profile?, so i would like to known, how is the installation
> process of
Hi, Gene. we have decided to use the Mesa 5i25 for our application, in this
case could you recommended us to use the standard profile or the low
profile?, so i would like to known, how is the installation process of this
card in the machine? thanks you.
El mar., 10 de jul. de 2018 a la(s) 21:53,
Which Intel NUC did you get? A couple of years ago I got a zotac box with
dual ethernet ports thinking that I might use it as either a router or to
drive an ethernet mesa board. I think it will end up as a router.
Eric Keller
Boalsburg, Pennsylvania
On Wed, Jul 11, 2018 at 4:05 AM Sven Wesley
Yes, looks like your email with the link went to me and not to the list.
Anyway, the Mesa card looks promising. Intel NUC and Mesa boards on the way!
/S
On Tue, Jul 10, 2018 at 5:14 PM Les Newell
wrote:
> I beat you to it with the same link but it looks like my email went
> directly to Sven,
15 matches
Mail list logo
