On Sunday, February 13, 2022 10:39:57 PM EST ken.stra...@gmail.com wrote:
> Small ball endmills are available for reasonable prices. See
> https://www.ebay.ca/itm/154526476320 and
With a 1/4" LOC that one looks usable but fragile, ordered 10.
My searching didn't find that one, nice find. I have
Small ball endmills are available for reasonable prices. See
https://www.ebay.ca/itm/154526476320 and
https://www.ebay.ca/itm/152182318115 for examples from a vendor with whom
I've been happy. Of course tiny ones may have insufficient reach to get to
the bottom of your threads.
-Original
On Sunday, February 13, 2022 8:14:19 PM EST Chris Albertson wrote:
> It is not the epoxy that is so hard. It is the filler they mix with
> the epoxy. Many times it is a kind of glass, not unlike what they use
> to make sand paper. Other times they mix finely ground bits of steel.
>
> I used to
On Sunday, February 13, 2022 6:22:05 PM EST ken.stra...@gmail.com wrote:
> Another possibility would be to make a good approximation to the
> desired buttress thread using a ball endmill. Mount the stock
> horizontal on your 4th axis and make multiple passes with the ball
> endmill with each pass
It is not the epoxy that is so hard. It is the filler they mix with the
epoxy. Many times it is a kind of glass, not unlike what they use to make
sand paper. Other times they mix finely ground bits of steel.
I used to use a brand of epoxy that sold bottles of pure resin and cans of
filler. I
On Sunday, February 13, 2022 2:58:02 PM EST dave engvall wrote:
> With current technology wood glues ( epoxy ) are often stronger than
> the wood which allows one to machine short sections and glue them
> together for a composite piece that is as strong as a contiguous
> part. I think Gene is
On Sunday, February 13, 2022 2:58:02 PM EST dave engvall wrote:
> With current technology wood glues ( epoxy ) are often stronger than
> the wood which allows one to machine short sections and glue them
> together for a composite piece that is as strong as a contiguous
> part. I think Gene is
I won't promise it does. It's been a while since I last played with it. Even
if it doesn't, it may be possible to pretend you are machining a slot in the
X-Z plane and use that for a lathe profile.
-- Ralph
On Feb 13, 2022 2:37 PM, Chris Albertson wrote:
CAUTION: This email originated from
Another possibility would be to make a good approximation to the desired
buttress thread using a ball endmill. Mount the stock horizontal on your 4th
axis and make multiple passes with the ball endmill with each pass being
deeper and nearer to the vertical wall of the buttress thread. Of course
On 2/12/22 16:01, Thaddeus Waldner wrote:
On using an ssd.
Booting from an ssd is now supported by the pi but you need to configure the
eeprom to enable it. This is pretty easy using the official raspberry pi imager.
I have this usb3 adapter and an intel pro 5450 ssd.
StarTech.com SATA to
On Sunday, February 13, 2022 1:05:48 PM EST Ralph Stirling wrote:
> Freecad "path" workbench generates g-code toolpaths. You can paste
> your openscad source code into freecad with the openscad workbench.
>
> -- Ralph
That would be the latest AppImage I assume? My version is a couple months
On Sunday, February 13, 2022 5:37:08 PM EST Chris Albertson wrote:
> On Sun, Feb 13, 2022 at 10:42 AM Ralph Stirling <
>
> ralph.stirl...@wallawalla.edu> wrote:
> > Freecad "path" workbench generates g-code toolpaths. You can paste
> > your openscad source code into freecad with the openscad
On Sunday, February 13, 2022 1:32:05 PM EST ken.stra...@gmail.com wrote:
> Thread milling would be a good approach except that I doubt that Gene
> has 18-inches of Z-clearance on his small mill to thread the length of
> his desired screw plus spindle clearance to mill to the table might be
> an
On Sun, Feb 13, 2022 at 10:42 AM Ralph Stirling <
ralph.stirl...@wallawalla.edu> wrote:
> Freecad "path" workbench generates g-code toolpaths. You can paste your
> openscad source code into freecad with the openscad workbench.
>
Will it handle this part, a lead screw? Last I looked, Path
On Sunday, February 13, 2022 1:24:54 PM EST Chris Albertson wrote:
> First off this is a really simple design. I think it could be done on
> a normal manual lathe with no CNC. Just use the correct thread cutting
> gears to drive the carriage.
>
> The trouble is that writing g-code by hand or
With current technology wood glues ( epoxy ) are often stronger than the
wood which allows one to machine short sections and glue them together
for a composite piece that is as strong as a contiguous part. I think
Gene is talented enough to make a live axis for his lathe that would do
a bang
On Sunday, February 13, 2022 12:37:31 PM EST ken.stra...@gmail.com wrote:
> Alternatively one can tilt the stock rather than the head which I
> believe is Gene's plan.
>
That much stock tilt (30 degrees) in a 21" workpieces length, is well
beyond the z travel available on that gantry mill, not
On Sunday, February 13, 2022 12:25:48 PM EST Robin Szemeti via Emc-users
wrote:
> If you can tilt the head at an angle, then something as simple as "G1
> X300.00 B30.00" will do it, depending on how you have configured the B
> axis. If you can't tilt the head, no amount of GCODE will help you.
Freecad "path" workbench generates g-code toolpaths. You can paste your
openscad source code into freecad with the openscad workbench.
-- Ralph
On Feb 13, 2022 8:54 AM, gene heskett wrote:
CAUTION: This email originated from outside the Walla Walla University email
system.
Greetings all;
Thread milling would be a good approach except that I doubt that Gene has
18-inches of Z-clearance on his small mill to thread the length of his desired
screw plus spindle clearance to mill to the table might be an issue.
-Original Message-
From: dave engvall
Sent: February 13, 2022
First off this is a really simple design. I think it could be done on a
normal manual lathe with no CNC. Just use the correct thread cutting gears
to drive the carriage.
The trouble is that writing g-code by hand or turning handwhels with no
computer breaks the chain that goes from your design
Other options for buttress. DIN | ANSI .. Either grind a tool out of M2
or equivalent or go shopping for inserts on the web surplus sites. They
won't be cheap but a bit less hassle.
Single point thread mill??
Lathe sound easier than milling it.
Dave
On 2/13/22 9:37 AM, ken.stra...@gmail.com
Alternatively one can tilt the stock rather than the head which I believe is
Gene's plan.
-Original Message-
From: Robin Szemeti via Emc-users
Sent: February 13, 2022 12:26 PM
To: Enhanced Machine Controller (EMC)
Cc: Robin Szemeti
Subject: Re: [Emc-users] need gcode maker
If you can
If you can tilt the head at an angle, then something as simple as "G1
X300.00 B30.00" will do it, depending on how you have configured the B
axis. If you can't tilt the head, no amount of GCODE will help you.
I'd just do it on the lathe ...
On Sun, 13 Feb 2022 at 16:54, gene heskett wrote:
>
24 matches
Mail list logo