Den Söndag, Juni 26, 2022 18:18 CEST, skrev andy pugh :
On Sat, 25 Jun 2022 at 15:56, Nicklas SB Karlsson wrote:
>
> Expected movement to stop the "probe tripped during move" but this does
> not happen.
There is an issue on the tracker about this, though I don't know if
anyone is actively
On Sat, 25 Jun 2022 at 15:56, Nicklas SB Karlsson wrote:
>
> Expected movement to stop the "probe tripped during move" but this does
> not happen.
There is an issue on the tracker about this, though I don't know if
anyone is actively working on it:
On Sun, 26 Jun 2022 at 15:45, dave engvall wrote:
> A couple of solutions present themselves but neither are ideal.
> Simply use the M6 shcs that hold the dogs in place to secure the CAT40.
> Balance and adequate strength/safety would seem to present problems.
Does the nose have any extra
Hi,
My Mazak V5 has been down for a few years. First for brushes on the
spindle motor and then a much more serious broken belleville stack.
Unfortunately, the spindle on this model comes out from the top which
means pulling all the hydraulics and the spindle motor/transmission and
getting
Sorry wrong link in previous email.
https://photos.app.goo.gl/SCAKjGBhPTQm1NKi9
On Sun, Jun 26, 2022, 7:00 AM John Figie wrote:
> Here are some pages about removing the motor and head for Series II
> interact 2
>
>
>
Here are some pages about removing the motor and head for Series II
interact 2
https://drive.google.com/drive/folders/0B2fj8HWg0FnNX1hjbGJpbTF0bDg?resourcekey=0-taJjv8naI-blsIgoBgwWEg
John Figie
On Sun, Jun 26, 2022, 1:11 AM wrote:
> On 2022-06-25 18:30, Jon Elson wrote:
> > On 6/25/22
On 2022-06-25 18:30, Jon Elson wrote:
On 6/25/22 15:56, Jon Elson wrote:
Hello, all,
I just got an R2E3 Bridgeport mill in my basement, and will be doing a
LinuxCNC retrofit.
I seem to recall the NC400 servo amps create a maddening squeal, is
that correct, or an I remembering some other
