I would like to try to run PathPilot on my own mill. I now run Mach4,
but I would like to see how well PathPilot works.
I see I can simply download a copy from the Tormach site. what
interface board do I need?
What is Tormachs position on this? I know they have to release the code
because
>
> Why would anyone care about the latest Linux version?
Perhaps the computer is used for multiple purposes and other software is
run on the computer. I only have one PC in the shop and it is used for
both milling and 3D printing. It also runs a web interface for remote
operation of the
On 1/22/23 18:15, fxkl47BF--- via Emc-users wrote:
On Sun, 22 Jan 2023, gene heskett wrote:
On 1/22/23 04:19, fxkl47BF--- via Emc-users wrote:
On Sat, 21 Jan 2023, gene heskett wrote:
On 1/21/23 20:23, fxkl47BF--- via Emc-users wrote:
i acquired a non-working ps 613u power supply
two
On 1/22/23 18:04, John Dammeyer wrote:
From: Bari [mailto:bari00...@gmail.com]
On 1/22/23 15:25, John Dammeyer wrote:
Why would anyone care about the latest Linux version?The fundamental
operation of LinuxCNC is read a
G-Code file and send out the information for motion. Read back
On Sun, 22 Jan 2023, gene heskett wrote:
> On 1/22/23 04:19, fxkl47BF--- via Emc-users wrote:
>> On Sat, 21 Jan 2023, gene heskett wrote:
>>
>>> On 1/21/23 20:23, fxkl47BF--- via Emc-users wrote:
i acquired a non-working ps 613u power supply
two 2200uf caps had exploded
i replaced
> From: Bari [mailto:bari00...@gmail.com]
>
> On 1/22/23 15:25, John Dammeyer wrote:
>
> > Why would anyone care about the latest Linux version?The fundamental
> > operation of LinuxCNC is read a
> G-Code file and send out the information for motion. Read back feedback from
> motion.
On 1/22/23 15:25, John Dammeyer wrote:
Why would anyone care about the latest Linux version?The fundamental
operation of LinuxCNC is read a G-Code file and send out the information for
motion. Read back feedback from motion. Display path on screen.
Why in the world would Bullseye be
> From: Sebastian Kuzminsky [mailto:s...@highlab.com]
>
> On 1/22/23 12:30, Alan Condit wrote:
> > Does any one have debs for installing linuxcnc for Raspberry Pi4 on Debian
> > Bullseye?
>
> We don't currently build that platform.
>
> Adding it would require new hardware in the buildbot: at
On 1/22/23 04:54, Robin Szemeti via Emc-users wrote:
Yep, I have used steppers, servos, optical encoders with EMC etc etc in the
past, however, on this particular device, I am not going to try and hack
the mechanicals apart to start changing stuff. It's a high quality bit of
military kit that
On 1/22/23 04:19, fxkl47BF--- via Emc-users wrote:
On Sat, 21 Jan 2023, gene heskett wrote:
On 1/21/23 20:23, fxkl47BF--- via Emc-users wrote:
i acquired a non-working ps 613u power supply
two 2200uf caps had exploded
i replaced them and it appears to be working
my complaint is the voltage
On 1/22/23 12:30, Alan Condit wrote:
Does any one have debs for installing linuxcnc for Raspberry Pi4 on Debian
Bullseye?
We don't currently build that platform.
Adding it would require new hardware in the buildbot: at least one
additional Raspberry Pi 4B, which is hard to find these days.
Does any one have debs for installing linuxcnc for Raspberry Pi4 on Debian
Bullseye?
Alan
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Yep, I'm planning to use the Mesa resolver boards, simply because I already
have a fair bit of Mesa kit. I expect resolution to be 14 bits and
accuracy to be 12 bits.
On Sun, 22 Jan 2023 at 16:52, Jon Elson wrote:
> On 1/21/23 19:34, Robin Szemeti via Emc-users wrote:
> > One thing that might
sön 2023-01-22 klockan 10:51 -0600 skrev Jon Elson:
> On 1/21/23 19:34, Robin Szemeti via Emc-users wrote:
> > One thing that might cause some ... well, "issues" is my resolvers
> > are used
> > to determine the absolute angular position of my two rotational
> > axes, ie
> > they are driven off
On 1/21/23 19:34, Robin Szemeti via Emc-users wrote:
One thing that might cause some ... well, "issues" is my resolvers are used
to determine the absolute angular position of my two rotational axes, ie
they are driven off the axes themselves after the gearing, not off the
motors before the
Hi Chris,
An interesting device, but you are making a fundamental mistake in
confusing resolution with accuracy. If you read the datasheet, they make
no claims whatsoever about accuracy, if it was good, I am sure they would
mention it. That said, I would reasonably expect them to achieve +- 5
Yep, I have used steppers, servos, optical encoders with EMC etc etc in the
past, however, on this particular device, I am not going to try and hack
the mechanicals apart to start changing stuff. It's a high quality bit of
military kit that has presumably worked well enough in its previous life,
On Sat, 21 Jan 2023, gene heskett wrote:
> On 1/21/23 20:23, fxkl47BF--- via Emc-users wrote:
>> i acquired a non-working ps 613u power supply
>> two 2200uf caps had exploded
>> i replaced them and it appears to be working
>> my complaint is the voltage and current pots are very sensitive
>> it's
18 matches
Mail list logo
