hat was in the cache, not the
newly edited file from the disk.
Nicklas Karlsson
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to
On 12/13/23 18:20, Nicklas SB Karlsson wrote:
tis 2023-12-12 klockan 21:34 -0500 skrev gene heskett:
On 12/12/23 17:39, Nicklas SB Karlsson wrote:
Have a quite large part compared to the machine there I put the
zero
point in the lower left corner. As machine limits for (x, y)
movements
On 12/12/23 21:11, andy pugh wrote:
On Tue, 12 Dec 2023 at 14:50, gene heskett wrote:
I also did not want 2.9-rt, I wanted master.
Try just running the first 7 lines of the script.
(I had forgotten that it also tries to install linuxcnc too)
That seems to get the key, but possibly errs
On 12/12/23 21:11, andy pugh wrote:
On Tue, 12 Dec 2023 at 14:50, gene heskett wrote:
I also did not want 2.9-rt, I wanted master.
Try just running the first 7 lines of the script.
(I had forgotten that it also tries to install linuxcnc too)
I have run the complete script but that does
On 12/12/23 18:56, andy pugh wrote:
On Tue, 12 Dec 2023 at 14:50, gene heskett wrote:
I also did not want 2.9-rt, I wanted master.
Actually, in that case, I think I have sent you in entirely the wrong
direction.
;o)
I don't think that we actually have a buildbot making arm64 debs.
We
is about 300x faster at the rough rounding of a square
stick. An A axis that can spin 500 rpm with arcminute or better accuracy.
Regards Nicklas Karlsson
Take care, stay warm and well.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and
On 12/12/23 09:17, andy pugh wrote:
On Tue, 12 Dec 2023 at 14:01, gene heskett wrote:
Got it Andy, Thanks, but now I need to get the key 3CB9FD148F374FEF, but
man apt-key says its deprecated, last used in bullseye, what now?
See the script linked in 7.1.4
http://linuxcnc.org/docs/stable
On 12/12/23 06:12, andy pugh wrote:
On Tue, 12 Dec 2023 at 09:35, gene heskett wrote:
link to how to add that to sources.list please?
http://linuxcnc.org/docs/stable/html/getting-started/getting-linuxcnc.html#_updates_to_linuxcnc
Got it Andy, Thanks, but now I need to get the key
Greettings all;
It sounds as if it is probably safe to add to my rpi4's
/etc/atp/sources.list to resume staying up to date with master.
link to how to add that to sources.list please?
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot,
eer in danger of falling asleep in
my diabetic & dotage years, 89 so far.
John Figie
On Sat, Dec 9, 2023, 7:39 AM gene heskett wrote:
On 12/9/23 06:13, andy pugh wrote:
On Wed, 6 Dec 2023 at 16:08, Leonardo Marsaglia
wrote:
Just a little update. We're going to try and feed all the v
volt
buck crowbared thru, putting the full 24 on the 5 volt stuff with the
expected results, lots of smoke. Lasted under a year, so I don't
consider it since.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that
.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law res
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
is worthless. So the encoder is the
$64,000 question. Which is it?
Thanks again a lot for your help guys! Sorry that I don't reply
individually :)
El dom, 3 dic 2023 a las 9:00, gene heskett ()
escribió:
On 12/3/23 04:42, Roland Jollivet wrote:
If you can obtain/borrow any thermal imaging
$300 starter printer is limited
to 50 or 60mm second speeds. We finally have a stepper that just works,
without burning your hand if you touch it. So please consider them if
you have to replace the fanuc's..
Take care & stay well, Leonardo.
Cheers, Gene Heskett.
--
"There are four box
-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desi
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law r
/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and
as always for your help guys!
Leonardo
Take care & stay well, and good luck Leonardo.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are f
e
unk. nguinx gives me complete interactive control over this 3d printer.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used
On 11/24/23 02:43, gene heskett wrote:
On 11/23/23 22:16, gene heskett wrote:
[...]
My rotary table was not expensive, but it has an adjustment on the
depth of engagement of the worm, to allow backlash to be reduced.
I thought that was a fairly common arrangement.
Seems to be std, my 4
On 11/23/23 22:16, gene heskett wrote:
On 11/23/23 17:22, marcus.bow...@visible.eclipse.co.uk wrote:
On 2023-11-23 21:18, Chris Albertson wrote:
Yes, a magnet and a steel disk is the simplest possible design. If
you don’t need indexing. Nothing would move. The disk could slide
over
designed
to be driven by nema 23 or bigger steppers, and they are not adjustable.
*Ryan McIntosh*
E4F Designs
(204)770-3682
r...@pebkac.ca
On Thu, Nov 23, 2023 at 1:25 PM Chris Albertson
wrote:
On Nov 22, 2023, at 1:06 PM, gene heskett
wrote:
I'd have to agree Andy. I need to design
an old set of
feeler guages) under the gear where it shoulders up to the case can
probably reduce the backlash by a significant amount.
*Ryan McIntosh*
E4F Designs
(204)770-3682
r...@pebkac.ca
On Thu, Nov 23, 2023 at 1:25 PM Chris Albertson
wrote:
On Nov 22, 2023, at 1:06 PM, gene heskett wro
. Not
giving up yet though.
Thanks for the ideas, they all help.
*Ryan McIntosh*
E4F Designs
(204)770-3682
r...@pebkac.ca
On Thu, Nov 23, 2023 at 1:25 PM Chris Albertson
wrote:
On Nov 22, 2023, at 1:06 PM, gene heskett wrote:
I'd have to agree Andy. I need to design a disk brake for my
On 11/23/23 14:26, Chris Albertson wrote:
On Nov 22, 2023, at 1:06 PM, gene heskett wrote:
I'd have to agree Andy. I need to design a disk brake for my A axis as there's
half a degree of slop in the worm drive which if it gets to the motor will be
held, but the slop in the worm makes
On 11/23/23 14:26, Chris Albertson wrote:
On Nov 22, 2023, at 1:06 PM, gene heskett wrote:
I'd have to agree Andy. I need to design a disk brake for my A axis as there's
half a degree of slop in the worm drive which if it gets to the motor will be
held, but the slop in the worm makes
will be held, but the slop in the worm makes for sloppy looking
holes, but the activation method is still in my head. Even that is only
important when drilling a hole for the handle. I'll come up with something.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, b
y thing though, neither
machine has ever done that mid job. Whats not to like?
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we mu
wire, that should all
be controlled by LinuxCNC. A place to sell your talents TomP?
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the la
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the la
. That's a non-starter, as is
the price for a single 64 bit core.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first ma
& 34's, are rated for up to 90 volts, doubling the speed you
can get from that same motor on other brands of drivers rated at 50
volts and running on 45. All of which means faster, more accurate
machining that uses less power to get the job done.
What's not to like?
Cheers, Gene Hes
a 51 thou groove.
Must have done something right, does half a MOA or less on the target.
Roland
Thanks Roland.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 194
c-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940
a
psu per motor.
Actually, I am impressed at the number of high vltage psu's the had
crawled out of the woodwor in the last 6 months.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-----
From: gene heskett
Sent:
__
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-user
low on
rising edges of A in ne direction and high in the other. So it's
_like_ step-dir
Quadrature drive and a closed loop driver would a a killer application.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Pleas
the price a bit. Particularly in the 3 phase versions. But they
run like casper the ghost is turning the cranks, Quiet.
> Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
Cheers, Gen
From: gene heskett
Sent: Monday, October 16, 2023 3:22 PM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] stupid question
[EXTERNAL EMAIL] Be sure links are safe.
I need to make some subroutines into callable files, but some sub call other
subs. So 3 Q?'s:
1; do sub files need
ame>
to update it?
3; can a subroutine file call another file, then use the results of that
call?
Thanks all.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 19
On 10/11/23 22:16, John Dammeyer wrote:
From: gene heskett [mailto:ghesk...@shentel.net]
I blew up old bucket-vac by putting a larger diameter hose on the
intake. This raised the air flow and the amps it drew, and apparently
tripped a one time thermal fuse about 9 minutes into a 12 minute job
, to discover the new hose worked great but the increased
air flow was way too much for the motor.
Right now I'm waiting on the printer.
On Oct 11, 2023, at 7:04 PM, gene heskett wrote:
I blew up old bucket-vac by putting a larger diameter hose on the intake.
This raised the air flow and the amps
f the line. But that duality was because the original power switch was
a dpst miniature rocker.
I have a high kilowatt powerstat that will give me some control too, but
I'd druther not tie it up running the vac till the rapture.
Thanks Mathew.
On Oct 11, 2023, at 9:08 PM, gene heskett wrote:
I blew up
are $50 a pop at Wallies, and I'd
like to run it at something resembling a CCS rating.
Does anyone have a clue how to translate that 4hp into amperage for the
motor?
Thanks all.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and
://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
ich is why the hose from my planer to the dust collector is aluminum
dryer hose, and grounded to the dust collector. No problem then.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Ch
tic charge.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in t
On 10/2/23 23:19, gene heskett wrote:
On 10/2/23 11:06, andy pugh wrote:
On Mon, 2 Oct 2023 at 15:41, Todd Zuercher wrote:
What I think I would do is build a multi chambered box similar to a
car muffler,
Or, in fact, a car muffler
I considered that too Andy, but the chances of finding
you can measure. In
this case moving stuff around for clearance to other stuff in the
environment it has to work in.
Take care and stay well, Andy.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
aust port. Listening to that for 2 hours non-stop
is quite annoying, even headache inducing.
Thanks for any ideas.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
I
On 9/24/23 09:33, andy pugh wrote:
On Sun, 24 Sept 2023 at 12:18, gene heskett wrote:
But I really don't understand why any system would need to be homed before
it could run full speed.
It shouldn't.
That could be the setting combination at work. IDK which set of limits
it uses when
On 9/24/23 03:03, John Dammeyer wrote:
From: gene heskett [mailto:ghesk...@shentel.net]
On 9/23/23 19:11, andy pugh wrote:
On Sat, 23 Sept 2023 at 22:42, John Dammeyer
wrote:
Andy,
Just curious since we have the same harmonic drive and STMBL for the
4th axis what max velocity
, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://gene
On 9/23/23 20:11, John Dammeyer wrote:
-Original Message-
From: gene heskett [mailto:ghesk...@shentel.net]
First, my numbers are for a nema-23 3 phase stepper servo, a closed loop
setup with an optical encoder on the rear of the motor that feeds the
controller. All lcnc does
to align a part, I do it in the usual ways, with indicators
and probes, and then touch-off for alignment.
I could do that too, but then I couldn't carve screw threads. Now I can.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and
he 3 minutes I was looking for the odd
noise, it was that quiet.
Take care and stay well, John.
[...]
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respe
On 9/23/23 15:27, andy pugh wrote:
On Sat, 23 Sept 2023 at 13:41, gene heskett wrote:
MAX_VELOCITY= 360.000
MAX_ACCELERATION= 12000
v^2 = u^2 + 2as
for 360 deg/sec and 12000 accel the overrun on stopping will be v^2 /
2a = 5.4 degrees.
Also it's possible that your PID
On 9/23/23 11:39, gene heskett wrote:
one other clarification, on page 13 of the html docs for PID:
pid.n.tune-type u32 rw
When set to 0, Pgain,Igain,Dgain are calculated
Whwn set to 1, Pgain,Igain,FF1 are calculated
But what is the more common "type" name? Position
or stepper driven 3 axis mills?
How about the spindle?
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law res
On 9/23/23 05:45, andy pugh wrote:
On Sat, 23 Sept 2023 at 00:26, gene heskett wrote:
So why can't I get a decent decel while homing it?
What is the [JOINT] Accel (rather than [AXIS] and what accel is used
by the stepgen?
currently:
[TRAJ]
...
ANGULAR_UNITS = degree
can't I get a decent decel while homing it?
2nd Q, has anyone converted the atpid tune procedure to a halui mdi
script? If so, where can I get it?
Thanks all;
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that
On 9/21/23 20:11, Peter Wallace wrote:
On Thu, 21 Sep 2023, gene heskett wrote:
Date: Thu, 21 Sep 2023 19:39:17 -0400
From: gene heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: Emc-users@lists.sourceforge.net
Subject: [Emc-users] Q,
switching machine from in
I'm told it
should work with the hard to find procedure, but it doesn't.
Thanks.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we m
On 9/20/23 14:18, andy pugh wrote:
On Wed, 20 Sept 2023 at 18:33, gene heskett wrote:
Do I need to do a separate addf "gpio read" and "gpio write" on a 5i25?
Not normally. The functions exist in case you are trying to do
bit-banging in a base thread.
Which I am not.
Greetings Peter;
Do I need to do a separate addf "gpio read" and "gpio write" on a 5i25?
I don't appear to be able to use the 5 inputs on a bob plugged into p2
on a 5i25.
Thank you.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soa
On 9/19/23 20:12, Peter Wallace wrote:
On Tue, 19 Sep 2023, gene heskett wrote:
Date: Tue, 19 Sep 2023 19:23:23 -0400
From: gene heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] question for Peter
On 9/19/23 20:12, Peter Wallace wrote:
On Tue, 19 Sep 2023, gene heskett wrote:
Date: Tue, 19 Sep 2023 19:23:23 -0400
From: gene heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] question for Peter
lent's
best. That puppy doesn't miss a thing.
Did I miss a setp above?
Thanks Peter.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for
On 9/12/23 09:39, andy pugh wrote:
On Tue, 12 Sept 2023 at 14:18, gene heskett wrote:
Do we have a way to print man pages?
I need a hard copy of hostmot2.9.gz
They are all available online, so you could print the web page.
http://linuxcnc.org/docs/2.9/html/man/man9/hostmot2.9.html
I had
Greetings all;
Do we have a way to print man pages?
I need a hard copy of hostmot2.9.gz
Thanks.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desi
idxdir <= abs_encdir.sign => sdiridx.in-edge
but hal won't buy it, giving a setp related error msg.
Is there a syntax that will make it work in real time?
Thanks Andy.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in
On 9/9/23 10:43, gene heskett wrote:
On 9/9/23 05:09, andy pugh wrote:
On Sat, 9 Sept 2023 at 02:01, gene heskett wrote:
What is the datatype of your mux2?
float ack the man 9 page
Use mux_generic instead, that supports all datatypes.
Thanks Andy, sounds like it should work.
Cheers
On 9/9/23 05:09, andy pugh wrote:
On Sat, 9 Sept 2023 at 02:01, gene heskett wrote:
What is the datatype of your mux2?
float ack the man 9 page
Use mux_generic instead, that supports all datatypes.
Thanks Andy, sounds like it should work.
Cheers, Gene Heskett.
--
"There are four
On 9/8/23 12:28, Viesturs Lācis wrote:
piektd., 2023. g. 8. sept., plkst. 19:07 — lietotājs gene heskett
() rakstīja:
Now I've another data missmatch, since when is a "not" not a true/false
invertor? I can't feed it into a mux2 in for the sample to hold???
https://linuxcn
On 9/8/23 12:22, andy pugh wrote:
On Fri, 8 Sept 2023 at 17:07, gene heskett wrote:
Now I've another data missmatch, since when is a "not" not a true/false
invertor? I can't feed it into a mux2 in for the sample to hold???
What is the datatype of your mux2?
float ack the
On 9/8/23 08:54, andy pugh wrote:
On Fri, 8 Sept 2023 at 12:30, gene heskett wrote:
The problem is the analog i/o sample_hold, I need the digital equ so I
don't have to do a jillion S32-float conversions.
I don't know why sample-hold is only S32, it would be much more useful
On 9/8/23 08:54, andy pugh wrote:
On Fri, 8 Sept 2023 at 12:30, gene heskett wrote:
The problem is the analog i/o sample_hold, I need the digital equ so I
don't have to do a jillion S32-float conversions.
I don't know why sample-hold is only S32, it would be much more useful
doing it for about a decade. Zero
problems.
But I need a digital sample_hold. Can this be cobbled up with flipflops?
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1
On 9/7/23 12:36, Peter Wallace wrote:
On Thu, 7 Sep 2023, gene heskett wrote:
Date: Thu, 7 Sep 2023 12:11:19 -0400
From: gene heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] question for Peter C.
On 9/7/23 12:36, Peter Wallace wrote:
On Thu, 7 Sep 2023, gene heskett wrote:
Date: Thu, 7 Sep 2023 12:11:19 -0400
From: gene heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] question for Peter C.
was
using to run the spindle cuz I needed the stepgen-4 outputs that are
overriding stepgen4 when 2 pwmgens are loaded, Now I need that stepgen-4
for this A drive.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that
No response from dev list in quite a while, maybe this will get to users
Forwarded Message
Subject: recent update broke display, can't run anything that needs display
Date: Wed, 6 Sep 2023 10:53:13 -0400
From: gene heskett
To: EMC developers
Greetings all;
Preparatory
On 8/30/23 10:13, andy pugh wrote:
On Wed, 30 Aug 2023 at 10:58, gene heskett wrote:
if I enable another stepgen, it
replaces pwmgen.1
Not usually, unless you mean "if I replace the FPGA firmware with one
with a different pin assignment"
Is there now a way around this
? That ability to skip an axis would end a lot of
confusion here.
Thanks.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must
2.8.0 it looks like the attached png
Which I see just fine, but john blocks any attempt by me to post a
screen shot. Why am I being blocked?
Take care & stay well TomP.
Thnaks TomP
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
it.
Good luck John.
-Original Message-
From: gene heskett [mailto:ghesk...@shentel.net]
Sent: August 14, 2023 1:31 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Rigid tapping
On 8/14/23 15:53, John Dammeyer wrote:
This thread has some good information about this
https
ave I misunderstood how the power tapping synchronized motion is done.
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are
your real time image
etc. Or perhaps just point me to a recent set of notes for the
RPi/LinuxCNC.
Thanks very much,
Alan
-Original Message-
From: gene heskett
Sent: Friday, August 11, 2023 10:56 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 12-M99-endless-main-program
On 8/11/23 22:06, gene heskett wrote:
On 8/11/23 11:59, andy pugh wrote:
On Fri, 11 Aug 2023 at 16:41, gene heskett wrote:
Same thing here Andy. but now I don't have the rest of this planets
languages installed, so how do I tell dpkg-buildpackage to build OMLY
english, utf-8 docs, Its (make
On 8/11/23 11:59, andy pugh wrote:
On Fri, 11 Aug 2023 at 16:41, gene heskett wrote:
Same thing here Andy. but now I don't have the rest of this planets
languages installed, so how do I tell dpkg-buildpackage to build OMLY
english, utf-8 docs, Its (make-buster-debs) dying on the .de docs now
On 8/11/23 09:19, andy pugh wrote:
On Fri, 11 Aug 2023 at 14:09, gene heskett wrote:
XPASS: Passed, but was expected to fail
The buildbot log says the same thing. But oddly, the final status is:
..Note: Using POSIX non-realtime
..Runtest: 257 tests run, 257 successful, 0 failed + 0
://buildbot.linuxcnc.org/buildbot/builders/1650.rip-buster-rtpreempt-rpi4/builds/3482/steps/runtests/logs/stdio
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If
On 8/10/23 19:40, gene heskett wrote:
On 8/10/23 17:45, alanmthomason--- via Emc-users wrote:
Hi There.
When I build linuxcnc and then run the standard suite of tests, I see
dozens
of tests where a line output says Running test XXX. After about 100
of that
type, I see the interp/m98m99/12
minutes ago, it
fussed about python's libboost not being the expected version, but it
hasn't caused a quit yet. Working on docs ATM. Master is up to around
1350 pages with lots of new gfx so it takes a pi 4 or 5 whiles.
Cheers, Gene Heskett.
--
"There are four boxes to be used in de
.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Bran
On 8/5/23 15:16, gene heskett wrote:
no, I didn't write this, someones email agent is broken when it
attributes this message to me.
On 8/5/23 14:45, Martin Dobbins wrote:
It makes me wonder which operating system they put on that Chinese
controller, and what motion control system.
Martin
ge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D.
rge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of libe
similar with mine. But I'm
getting lazy in my dotage. And playing with 3d printers too.
-Original Message-
From: gene heskett [mailto:ghesk...@shentel.net]
Sent: July 29, 2023 10:37 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Drilling holes in the back of a steppe
101 - 200 of 11409 matches
Mail list logo
